searching for this in all the internet and you say to in half video, thanks!
@juanmendozaroldan53662 жыл бұрын
This blow my mind, very good info, thank you so much!!
@spartakum699 ай бұрын
Thank you for this tutorial. Sir paano naman pag tone bridge app ang gamit?
@JekoJekov9 ай бұрын
Great video! Thank you! Do you know if the values are the same for the MG-30 and if not, do you know where could I get them ?
@syut6710 Жыл бұрын
Very helpful tutorial bro. Halimbawa ginamit mo siya to turn on/off yung distortion, smooth be yung transition? Problema ko kase kaya ako bibili ng controller na 'to eh dahil sa latency ng paglilipat from one preset to another. Para kaseng may stutter siya pag nag-engage na yung nilipatang preset. Looking forward to hearing from you bro. TIA!
@mutizen1392Ай бұрын
micro usb pa kase ang mg300. expected yung delay nyan sir
@codyclintonandtheaprilfools8 ай бұрын
Does it remember the way you had the Tube Screamer set when it turns on and off? Like… will it recall the way the tone, level, and gain are set?
@-WidioAndikaPutra8 ай бұрын
Yes, like u tweak select knob on your pedal after u set the efx before, when u back to the pedal u set the value will not change, but make sure u save the preset
@fidellordillidanh.28645 ай бұрын
Hello there bro, i was wondering, can i use 2 or more effects at the same time with midi footswitch?
@stormdami2 жыл бұрын
Thank you!
@jcbiyaherotv Жыл бұрын
Hey bro awesome video! Is it possible to connect 2 midis having different functions to 1 mg300?
@Albertsama Жыл бұрын
I haven't tried that one sorry. But according to what I read, it seems possible
@-WidioAndikaPutra8 ай бұрын
How to config the footswitch using cable data direct to mg 300?
@jo.burgos Жыл бұрын
How do you preset the bank up / down combined switches ( E and F ) ?
@MarcCuaton2 жыл бұрын
It's not working please help me
@jeyatee6345 Жыл бұрын
Won't work on my Nux mg30. I want only to work as preset changing not stomp box mode
@Albertsama Жыл бұрын
i think it's a different setting for the mg30
@damedane2423 Жыл бұрын
Sir gagana pa rin po ba ito kahit hindi nakaconnect si nux sa laptop?
@sirjford84802 жыл бұрын
sir,kabibili kolang po ng akin. may way kaya para ma panatili nya yung value ng tube screamer kapag na turn off gamit ang chocolate? or mas okay nalang na gumawa ng presets example: 1A: clean 1B: clean + delay 1C: clean + tubescream 1D: clean + tubescream + delay para for example kagagaling ng with tube screamer at need i off press nalang yung 1A?
@Albertsama2 жыл бұрын
sa akin kasi sir nagreretain yung value ng tube screamer pero dapat ang active preset mo sa mg300 is yung may tubescreamer. pero pwede din yan sir na gumawa ng sarili preset
@mizzaelmontero5289 Жыл бұрын
I have a question, should all the presets be programmed or is it only with one?
@Albertsama Жыл бұрын
it only works on 1 preset.
@brantescorial98 Жыл бұрын
@@Albertsamaso you can't programm other presets? Or you meant that one should program midi each preset?
@sap1ensrecord Жыл бұрын
i'm using melo midi commander, is it useful for nux mg 300?
@Albertsama Жыл бұрын
sorry haven't tried it yet
@YashClips Жыл бұрын
Woahh!! how do you use this to switch presets in the neural dsp tho. It would be awesome if you could make a video on that
@bradleymendoza30352 жыл бұрын
is it necessary that the mvave is connected to the computer or ipad or only to the nux? Cheers
@Albertsama2 жыл бұрын
you only need to connect it to pc or ipad to configure the foot switch but after that you just need to connect it with the nux mg300
@emoholicarl2 жыл бұрын
@@Albertsama does it still need the bluetooth USB as the receiver? what is the host that you used here?
@Albertsama2 жыл бұрын
@@emoholicarl i'm currently using the m-vave MS1 midi receiver. according to other users, you really need the midi receiver in order for it to work. though I haven't tried using a usb cable from the nux to the mvave chocolate since I don't have a usb-c to micro usb cable
@creeda7254 Жыл бұрын
It work on nux mg 400?
@godfarther4088 Жыл бұрын
Tap Tempo data?
@bcan Жыл бұрын
Neural DSP tutorial pleaseee
@Albertsama Жыл бұрын
i have a different tutorial for Neural DSP (the video before this) but only for preset change
@bcan Жыл бұрын
@@Albertsamait's still for nux tho?
@Albertsama Жыл бұрын
@@bcan sorry it was a youtube shorts but it wasn't a tutorial. i just followed this guide for neural dsp kzbin.info/www/bejne/g4TQmWqaZ5l0pcU
@bcan Жыл бұрын
@@Albertsama thanks so much
@jeyatee63452 жыл бұрын
Is there a stomp box mode?
@Albertsama2 жыл бұрын
i don't think so. this is the work around that I did to have something similar to stompbox mode
@jeyatee63452 жыл бұрын
@@Albertsama i mean stomp box mode is individual effects mode.
@jeyatee6345 Жыл бұрын
@@Albertsama i tried on my Nux mg30 and it won't work
@sedrock2 жыл бұрын
Sir pano po pag nag change ako nag patch d na gagana?
@Albertsama2 жыл бұрын
technically gagana siya pero might not work as intended. if for example yung configuration mo for 1 switch is para sa EFX na Tubescreamer then nagchange ka ng patch na Distortion yung gamit na EFX, then pagpindot mo ng footswitch babalik siya sa Tubescreamer with the default parameters(naka 12 o'clock lahat).
@sedrock2 жыл бұрын
I see bali limited lng sya isang patch
@Albertsama2 жыл бұрын
yup
@morrisbarrozo48252 жыл бұрын
Did you experience latency in terms of sound pag nag tturn on/off ka ng effects block?
@michaelsarmeinto87422 жыл бұрын
can you make a deisgnated switch for tap tempo for mg 300?
@Albertsama2 жыл бұрын
the only thing that I tried is use the foot switch to set to a specific tempo. i'll try to check if it can be used as a tap tempo