Alfa Romeo Giulia/Stelvio SGW Bypass, interfaces, adapters, extensions and diagnostic software.

[@McLeanGary]

Good information for sure, the interfaces can be confusing. Thanks Jason!

[@alfissimointernational]

No problem. Glad it helped.

[@DrWillFaartz]

Thank you - yes I definitely told them.

[@treyspinner1192]

thanks for the info when are you releasing a vid showing setting these up . kinda confused on how to link the bluetooth devices to a laptop

[@alfissimointernational]

Soon, when I get a chance to. Thanks

[@alfissimointernational]

I will try to make one this weekend.

[@SbnThaOne]

Maybe I’m a bit confused or.. since I’m so used to bmws. I have a 2021 Alfa Romeo Giulia sport. For reset oil service etc I need the following - Sgw Bypass - OBDlink MX+ interface? Don’t need the extensions or adapters?

[@VegaFIFAyt]

So in order to reset the break pad system light I will need the greay and blue adapter? Is also needed for Race Mode? Thanks in advance

[@jasonminos5155]

Yes, you need the interface, both adapters and software. Ciao

[@spizzlo]

Thanks Jason!! Is there any reason to get multiecuscan over alfaobd, other than an easier to use/more modern interface? It was a couple years ago now, but you said in a forum post that mes was far better than alfaobd. I have a 21 Giulia Q4.

[@alfissimointernational]

Alfaobd has a few more functions but no, they both do basically the same thing. Either one is great. MES is slightly better due to it looks easier to use while Alfaobd might be more old school looking and not as easy to use for some but I like the simplicity of it and a few more functions it has.

[@spizzlo]

@@alfissimointernational Thanks Jason!!

[@kencult]

Great explanation video! Was on the website trying to figure out what I'd need and this helped a ton. I have a 2017 Giulia and my climate control system is very buggy. There will be a LONG like 30 second delay between adjusting the fan speed to when it actually happens, and sometimes it doesn't work at all. Would using alfa OBD be able to help me diagnose what could be going wrong? Not sure if my car just needs a software update or if it's a more serious electrical problem.

[@alfissimointernational]

Glad to help.

[@dead2that]

I have a 2017 giulia Q4 Changed shocks and brakes. Brakes locked up for some reason and won’t go out of Brake service mode cause it says it’s in motion. Maybe I missed it in the video, but what do I need for my vehicle. Seems like I break something trying to fix something. Taking things to the shop but I need a setup like this for the future. Thank you for the video.

[@alfissimointernational]

Interface, Adapters, and Software. You will need to go into ABS and clear out everything.

[@DrWillFaartz]

Jason, with the SGW still in the place, will the official Alfa scan tool work ..so the dealer can scan for codes if need be? I am out of warranty and the service advisor I spoke with wasn’t real sure. Just curious as I’m getting some minor maintenance. Thanks

[@alfissimointernational]

They can still access the car with it in place. Do not worry about it but make sure they know about it so they don't lose it. No problem there.

[@Dholi3144]

Would using these things void my Alfa warranty?

[@jasonminos5155]

No!

[@Loyal_though1]

all those cables come in the package that alfissimo sells ?

[@alfissimointernational]

No, this is an explanation of all the available hardware and how they work.

[@Loyal_though1]

@@alfissimointernational is there any obd2 scanner that you could recommend ?

[@alfissimointernational]

@@Loyal_though1 It's all in the video. Multiecuscan or AlfaOBD software with the hardware shown in the video.

[@the_kenyanguy]

Jason, thanks for the info. So can the OBD MX+ be used instead of the SGW, with the MES software? My QV is manufactured on 2/18 so I'm not sure if i need the SGW or not, to get that exhaust control module

[@alfissimointernational]

No, SGW bypass needed for 2018> no matter what. You need it.

[@the_kenyanguy]

@@alfissimointernational thanks. I realized that once I paired the OBD MX+ with the MES and used their SCAN function and at the end it stated that "SGW detected". I think affording to your tracking number I should get it by Friday

[@tomgordon5762]

Will Veepeak BLE work with alfaobd or MES? Thanks

[@alfissimointernational]

No idea what that is.

[@JessicaRobles-e8n]

Does this bypass the fcw? And cruise control

[@alfissimointernational]

no

[@medat5101]

What does SGW stand for?

[@alfissimointernational]

Security Gateway Module.

[@DomSchiavoni]

For a Giulia/Stelvio Oil Change all you need is: -- SGW Bypass [$60] -- OBDLink LX [$90] -- Android/Windows Device with Multiecuscan app [$60] Total Cost = $210 No need for the Blue&Grey Adapters, Correct? and the MX+ is a waste of money if you dont use Apple as it is $50 more than the LX