ALL 6.7 Powerstrokes should come with this fix from SPE MOTORSPORT

[@jasonmarkiewicz9404]

Grateful for videos like this! I was halfway through this job and the internal “catch can” would not sit flush for the life of me. Nothing in the instructions mentioned this. Luckily, you mentioned it was a FORD cast issue, I had to grind 1/8” off and then smooth it out. A file would have taken me 27 hours 😆. Thanks!!

[@PowerstrokeRick]

Glad this was able to help you out!! Thats my goal! Thanks for watching

[@dtfros]

As a new owner of 2018 crew cab long bed, I just finished mine and used your video as a guide. Excellent work.

[@PowerstrokeRick]

Thanks for watching and glad it helped!!

[@THETRUTH-ld2mh]

2017 and Newer does not have filters they already fixed that problem cut it open and look

[@497SC]

@@THETRUTH-ld2mh My 2019 F350 has the serviceable CCV with the filter inside.

[@kkeane5749]

The Ford Breather you took out is the updated one. It didn't have a replaceable filter. Biggest cause of oil leaks is high crankcase pressure too which is another benefit of installing this. Great video , Suscribed

[@PowerstrokeRick]

I was wondering why it looked a bit different from the one on my 2015! And yes I agree and thanks for watching and subscribing!

[@Bluegrassboy49]

You may consider putting a screen cap on the end of the vapor discharge hose to prevent wasps and insects from entering the hose and setting up house. I suppose if you drive that Ford every day, this may not be a problem. Just something to consider.

[@PowerstrokeRick]

I do daily this truck luckily but that’s a good idea, my blue truck I don’t daily and I have this kit on that probably wouldn’t hurt to do that

[@andywindjack44]

What works best is just plain steel wool

[@David-oj7kt]

Bugs won’t go near the Oil smell and residue !!!

[@Superduty_59]

@@David-oj7kt Great idea on the screen. I came here to say that! I work on generators for a living. They love plugging up oil drain hoses and natural gas regulator vent tubes. They couldn't care less about smell or left over oil.

[@sparky21287]

new to the 6.7 life, loving the content.

[@PowerstrokeRick]

Thanks for watching!!! Tap that subscribe button!!

[@sparky21287]

@@PowerstrokeRick already did brother! 🤙🏼

[@PowerstrokeRick]

@@sparky21287 much appreciated thank you!! 👍🏻🤘🏼

[@johnthacker4642]

Just did mine on my 12, thanks for the great vid

[@PowerstrokeRick]

Thanks for watching!

[@professionalinspectionserv9468]

Thanks for the information. If vehicle does not have a replaceable filter, is this needed? I thought the issue was filter clogging up. Or is it the vapors being drawn in. Thanks.

[@PowerstrokeRick]

This gets rid of the replaceable filter that clogs up. SPE Motorsport also makes a drop in kit with a serviceable filter that's better then factory!

[@professionalinspectionserv9468]

@PowerstrokeRick thanks.

[@michaelbwbrenner]

Even better, SPE also now offers a recirculating with internal catch can; for those of use who don't want oil spots

[@PowerstrokeRick]

Yup what he said ⬆️

[@Pjnow1366]

Great video. I have a 2019 6.7 and looking to do this. 👍👍👍

[@PowerstrokeRick]

Thanks for watching!!

[@paulrockwood371]

Love the video man, looking forward to more from ya. I'm gonna be doing this soon, just need to get a nice creeper like youve got haha.

[@PowerstrokeRick]

Thanks man much appreciated and thanks for watching!!! And yeah that creeper gets the job done!

[@copperroad90]

How would this work for -40 weather , would it possibly freeze off from the vapours.

[@PowerstrokeRick]

Not sure we don’t go below zero too often here in Ohio

[@jeremybragg9280]

Had any problems after putting it on? I’ve got on in the garage for my 2020.. read where it can blow out turbo seals etc due to not having enough vacuum but not really seeing anything it could affect it…

[@PowerstrokeRick]

Nope no problems so far clocked only 50 miles with it and no issues! It’s all on the low pressure side so shouldn’t be any issues! Thanks for watching!

[@bradfordvidinha8041]

Awesome content this really helps when working on my 2021 Superduty. Aloha from Hawaii.

[@Superduty_59]

Was the bolts long enough to go through the catch can and fitting? Or did you buy longer bolts?

[@PowerstrokeRick]

All hardware you need is provided. If you buy the internal catch can they give you longer bolts in the kit!

[@Quad4vfliv615]

Dang my little butt sure could use that snap on climber deal

[@ShawnDavis-g4v]

I Installed this setup and changed out my 2 fuel filters.. after starting my truck, I had no power... any reason why... what did I do wrong?

[@PowerstrokeRick]

Unplug any sensors?

[@PowerstrokeRick]

Where did you have no power?

[@professionalinspectionserv9468]

Chopper noise is the new EPA arsenal! Lol.

[@bryanst.martin7134]

Do you run an oil accumulator for starting? A fine Mechanic in Utah is telling us the oil pump has to deliver 2qts of oil to the system before pressure builds. I have 3 customers wanting them. So I had them order 3qt accumulators to alleviate the oil starvation on startup. When they come in I will install them. $300 insurance.

[@PowerstrokeRick]

No I do not. Send me a link to that product

[@bryanst.martin7134]

@@PowerstrokeRick This Google search page has many to choose from. I recommend 3qts. www.google.com/search?q=Oil+accumulators&oq=Oil+ac&gs_lcrp=EgZjaHJvbWUqBggAEEUYOzIGCAAQRRg7MgYIARBFGDkyBggCEEUYPDIGCAMQLhhA0gEINzAxOWowajGoAgCwAgA&sourceid=chrome&ie=UTF-8

[@bryanst.martin7134]

Add a solenoid valve to energize on start or glow plug warm up.

[@marcmurch1853]

Could tell your in ohio with wncx 98.5 playing in back ground 👍

[@PowerstrokeRick]

Yessir!

[@ivanazuara3962]

I got my kit but I’m wondering if I can install this without deleting and tuning my truck, still under warranty

[@PowerstrokeRick]

Yes it can still be installed emissions compliant

[@BG-xh5rb]

I get what you are trying to do, but just consider servicing the ccv unit?

[@Brandon-vo1wr]

Is there a reason why the internal catch can won’t fit flush to the crank case?? You shouldn’t have to modify it right?

[@PowerstrokeRick]

Some years and models have a issue with that due to a casting issue from the factory, looks up the directions on spe website and they let you know to file it a bit.. kinda sucks but fortunately I haven’t had to do it with either of my trucks

[@Brandon-vo1wr]

@@PowerstrokeRick thanks… ended up cutting a 1/4” off the bottom and using a grinder to round and smooth it up. Turned out pretty good but that seems to be my luck with everything I buy 😅

[@PowerstrokeRick]

@@Brandon-vo1wr glad it worked out! Kinda sucks it’s like that!

[@rickc1124]

Will this work without the internal catch can ?

[@PowerstrokeRick]

Yes

[@JoséMartinez-h7b]

Price for parts we’re getting

[@JoséMartinez-h7b]

2022 f250

[@arielsvlog1778]

Can you tell me the name of the parts you used to search for them?

[@scottsever7656]

Can you remove this if you still have all your emissions and everything worked fine and to what kind of fuel filter are you running underneath the hood?

[@PowerstrokeRick]

yes you can still remove it

[@Gendreau113]

WARNING: Please make sure when you install your hose, you ensure theres no "U" shapes in your hose routing... If you have a low pount, over time oil vapor will build up and cause oil to actially pool up inside the hose and block the flow (Even with the internal catch can!), witch can lead to MAJOR engine probelm/damage.... The line in this video is VERY close to coming down from the engine, and then it almost loops back upwards when you used the second zip-tie.... Be careful guys!

[@PowerstrokeRick]

Put it on with the hose kinked and let me know how that works out for ya!

[@Gendreau113]

@@PowerstrokeRick That's exactly my point? I said don't have any low spots in your house, and obviously don't have it kinked lmao

[@David-oj7kt]

Does it void the warranty ?

[@glennvallejo760]

Subscriber 979. Good video

[@PowerstrokeRick]

Thanks for watching and thanks for hitting that subscribe button!!

[@ThatHawaiianBoy22]

Great vid man!! Gonna check out your page! Have any discount codes for SPE? If not they need to provide you with some, you seem to like their stuff! 🤙🏾

[@PowerstrokeRick]

I'm glad you liked it! Unfortunately, no discount codes for SPE, but you can get in contact with them to see if there are any deals!

[@butanezi]

In Finland, if you remove that part of your Ford car, the police will write you a $35,000 fine

[@PowerstrokeRick]

Thats crazy!!

[@968porsche9]

america too. not sure how much,but pretty sure there would be a fine.

[@David-oj7kt]

In china they pump all they can into the air and water

[@location_florida]

How would they know

[@WildTines]

Any codes after the install?

[@PowerstrokeRick]

nope

[@TheZchauvin]

Is the cap normally a pain in the ass to get in, as in want to pop out or is it supposed to just set in easily….

[@arielsvlog1778]

Good afternoon, where can I buy these parts?

[@PowerstrokeRick]

Link in bio. @spemotorsport

[@arielsvlog1778]

@ thanks

[@968porsche9]

I know you want to support your sponsor, but for the po foke like me, can i just disconnect the hose, extend it to a catch can or similar and cap off the entrance hole?

[@PowerstrokeRick]

If you were in a bind I’m sure you can make something work but for $199 if you can afford a powerstroke you can definitely swing one of those! Just in my opinion

[@968porsche9]

@@PowerstrokeRick later

[@968porsche9]

@@PowerstrokeRick retired, not wealthy, so good luck to you

[@andrestorres4590]

@@PowerstrokeRickgreat work man I’m with you don’t buy something if you can’t maintain it

[@iFishSlim]

what was that track? was fya!

[@BRIANVANDUYN]

I bought a SPELAB kit and the tuner is probably fake it don’t work at all I’m very disappointed at this time 2022 f350 6.7

[@PowerstrokeRick]

Yeah SPELAB is Chinese junk, SPE Motorsport is where it’s at!

[@vongillman]

Not sure Im a fan of the vent hose under my BUTT .... Just sayin ! I think id run it to the back of the truck .Thx for the video !!

[@PowerstrokeRick]

Yeah it can get annoying sometimes there maybe eventually I’ll run it further! Thanks for watching!!

[@Fl-diesel-Mechanic]

Does spe give you all there stuff so you can make videos or do you honestly think that they are the best option or are you one of those guys that wants everything to be the same brand

[@PowerstrokeRick]

The parts speak for themselves. They put out good ass products and I run good products on my trucks!

[@Fl-diesel-Mechanic]

@@PowerstrokeRick I did not intend to offend you if that is what I did I have a couple of their products on my truck as well but I chose some other brands as well so I was just curious if you were receiving a discount for the advertisement that is all if you are ever in south Florida and want to check out some trucks or you want to race let me know

[@PowerstrokeRick]

@@Fl-diesel-Mechanic no man all good I take no offense!! And sounds good if I’m ever down that way I’ll hit you up! Thanks for watching

[@shaney-nq9nr]

Still didn’t answer the question 😂

[@powerstroke6.7]

By doing so you are not allowing crank case pressure to be released as intended. Original setup uses slight vacuum from the turbo to help relieve the cc pressure… you will have turbo problems down the line. Leaking oil on the exhaust side making the truck smoke and eventually blow out your turbo seals… Bill Hewitt from powerstokehelp explained this is detail. Rip Bill.

[@rbrooks5766]

You don't need a vacuum to release pressure. Think about that for a moment. 🤔

[@Fl-diesel-Mechanic]

I ran mine into the exhaust with a Venturi and I have a nice steady slight vacuum that increases with throttle and there is no problem with my turbo big dog🥸

[@powerstroke6.7]

⁠@@Fl-diesel-Mechanicthat’s the correct way to do it… which 99% of the people don’t do.

[@powerstroke6.7]

@@rbrooks5766pressure is in the bottom end my man… in the crank case.

[@ty1erjames752]

Do you recommend servicing the filter rather than deleting it?

[@anthonyleeser4571]

It was difficult trying to listen to what you're saying and at the same time, Stairway To Heaven. Led took priority. I'll rewind and will focus on you Rick!

[@PowerstrokeRick]

Yeah I gotta get a mic and turn the tunes down a bit haha

[@benpiller-d6v]

Great idea, photography, audio, & instruction, but please get rid of that crazy "Music" at the beginning. Thanks for showing.

[@AaaaandYerDhem]

You go ahead and make a power stroke channel and you can put whatever music your heart desires. Don't judge the man because he likes to thrash to his music

[@donovanschlehuber9168]

You’ll be puking oil on your frame now

[@PowerstrokeRick]

That’s what the catch can is for. Barley any oil comes out

[@mr8610]

How stinky is it? That’s my worry.

[@PowerstrokeRick]

Not to bad at all

[@mr8610]

@@PowerstrokeRick having a local shop do my upper oil pan repair, not about that weekends long repair life anymore in my older age. Don’t want to deal with this headache again, so I’m definitely doing this kit alongside that repair.

[@PowerstrokeRick]

@@mr8610 yeah it is definitely worth it I have it on my 2015 as well for the past few years

[@forspamhaha]

How is the SPE fuel filter kit treating you? I just installed it on my 22’ and it was a bitch. For whatever reason, the fittings on the housing did not want to slide into the stock fuel lines. We have to file the edges for the lines to slide in and lock. Another problem was the “push lock” lines came apart on their on and truck went into reduced power and threw a check engine light for low fuel pressure. Line had popped off the barbed end of the fitting. Put some clamps on it and was good to go.

[@PowerstrokeRick]

You have a long bed or short bed? I’ve got over 1000 miles on my setup and haven’t had a single issue. The lines were a tight fit getting on the housing but i didn’t have to file anything. What did you file? And haven’t had a push to connect fitting come off either

[@forspamhaha]

@@PowerstrokeRick I got a long bed. The black fittings on the billet spe housing. The tips had to be filed a bit cause the stock fuel lines just wouldn’t slide in fully. The black hose that came in the kit popped off the barbed fitting provided in the kit. You know how you used hot water to push the fitting into the line? The line popped off that fitting.

[@PowerstrokeRick]

@@forspamhaha I know the one fitting location is different on the long bed trucks but I am sorry to hear that.. how many miles have you ran it till all that happened? I would contact SPE let them know what’s going on

[@forspamhaha]

@@PowerstrokeRick it was 2-3 days after installing the kit that the fuel line popped off the fitting. Once I put clamps on, been over 1000 miles with no problems. Thought I’d ask you because I posted this issue to a 2017+ powerstroke group on fb and 6 guys commented saying the same thing happened to them. One guy tried calling spe about the line issue and he said SPE wasn’t very helpful.