All-New Morimoto 2Stroke 4.0 LEDs Installation on 2014-2021 Toyota Tundra! | Best LED Upgrade💡

[@Raul10123]

Could you do a video on installing fog light on a sr model should in the video

[@HeadlightRevolution]

Good suggestion!

[@dcd6115]

I have a 2013 FJ Cruiser. Can I use this bulb in my FJ and will it work for both low and high beams?

[@jeminger]

So, I'm assuming for a Tundra in this year range there is no need for the optional DRL Anti-flicker harness? I'm debating on either this bulb or the GTR Ultra 2 for my 2015 Tundra. But I'm not totally sure if either will require a different housing cap extension or harness. Any help on that would be greatly appreciated! I'm leaning toward the Ultra 2 for the simple fact that it seems to have a higher percentage increase in brightness over the 2 stroke.

[@HeadlightRevolution]

No harnesses or dust caps are needed for the 14-21 Tundra! It'll be a direct plug-and-play replacement.

[@KrzysztofMarc]

How do you orient the bulb correctly!?

[@HeadlightRevolution]

Check this out: kzbin.info/www/bejne/hJPJcqyni8yJmq8

[@jbrow117]

Can you do a review with a 2007-2008 Acura TL Type-S... I need to know what is my best option as one of my High/Low beam lights is out Do you do any How To replace videos like TQR

[@HeadlightRevolution]

Good idea! We can definitely suggest this to our team.

[@josephwebb3006]

I cannot pull the collar off to insert into the dust cover. You make it look easy on the video. But, neither headlight will budge. HELP! Please!

[@HeadlightRevolution]

It can definitely seem a lot tighter, but we promise you won't break anything by giving a firm grasp and tug!

[@josephwebb3006]

@@HeadlightRevolution you forgot to mention that you have to push down and rotate the collar left almost 180 degrees. Without doing this step it will break for sure!

[@JohnDoe-ch6de]

@@josephwebb3006Yea, I didn’t even see that mentioned in the instructions or anywhere. I figured it out myself, after some firm tugs, but then noticed I should turn it to a spaced area (180 degrees) and it then comes off very easily. Wth; that needs to be definitely covered in the instructional videos first these specific lights.

[@JK-qj9qp]

Lux is on the lower end 👎🏿

[@HeadlightRevolution]

Sometimes it's not all about lux, and instead about beam pattern and light distribution!

[@lkajiess]

I've been running these for a couple of weeks on my 3rd gen 4runner and there is a huge improvement over stock visibility. On high-beams, it's not even close.

[@JC-nl2oi]

One thing you guys didn’t mention in the video is that you have to rotate the collar to the end first before you can pull it off. I was pulling pretty hard at first and nothing was happening. Good thing I didn’t break it, but thanks for the video. Super helpful othersise

[@josephwebb3006]

Which way do you rotate it?

[@JohnDoe-ch6de]

@@JC-nl2oisame here! I pulled darn hard plus wiggling it from side to side . Finally noticed too what you noticed.