All New Motion Raceworks LS Swap Throttle Cable w/ GM/Ford Pedal Attachment

For the modern day enthusiast with a late model cable throttle body style engine, throttle cables can be somewhat frustrating. Previous designs with single clamp adjustment at the throttle cable makes it a one time use and can be very tough/impossible to adjust.
Motion Raceworks wiped the slate clean and created a whole new cable with thinking centered around the user, adjustment, fully secure cable, and aesthetics.
We started with a throttle pedal end that fits most GM and Ford pedals, this piece makes it easy to feed even a semi frayed cable through, it simply threads on either side of the pedal. Featuring not one but two set screws, the redundant fastening makes it nearly impossible for the cable to pull through if adjusted correctly.
Outer sheath ends are adjustable in length from either direction featuring a self threading sheath.
Shop Motion Raceworks
www.motionraceworks.com
FOLLOW US:
Website: www.motionraceworks.com/
Facebook: / motionraceworks
Instagram: / motionraceworks
TikTok: vm.tiktok.com/JjuVejc/

[@lazyhoundracing9621]

Nice setup.

[@borogers9677]

Nice cable set up.

[@borogers9677]

Would it work on a carburetor set up?

[@7KidsSpanoMan]

You guys always come up with the best stuff! Keep up the good work!

[@davidring2438]

Add that to the wish list 💯🇺🇲💪🏼

[@greyhairedpete]

Amazing Tyler! I figured you guys would end up making your own cable. Nice work!

[@jamieschnowske4981]

Great work Tyler

[@MrBlackbutang]

Absolutely Feckin Awesome. Thought I would never find the right one. Thanks

[@indianaslim4971]

Tyler looking like he enjoyed an organic snack prior to filming....Slim approved!!

[@cdnaudioguy]

Love the 'studio'! Tip microphone tip.. Grab a lapel/lavalier mic, or add something to the walls to absorb sound. That'll make the voices clearer. Keep rockin' guys!

[@danielmason4494]

One Stop Shop

[@IR-nq4qv]

Nice looking user friendly / universal throttle set up, . I was picking up everything Tyler was laying down, very well explained. However....., at 2:20 he feeds the throttle cable through the Ford/GM eye on the pedal linkage from the front instead of the back. Where's Jack Stand Jimmy when you need him? LOL I want a take 2 on this one.. Just kiddin'.., awesome product, cheers to much success and great channel.

[@Sharkey_t]

tech tip tuesday idea: how to cut your throttle cable and never have it fray by using a tig welder

[@MotionRaceworksOfficial]

Still doesn’t allow you to tension it properly

[@showtime2203]

👌🏿 happen 2 just View this video saw the quality of the cable I already ordered it 👌🏿

[@BadLuckGarage]

very nice

[@andyruni1234]

Hey awesome product from your team! I'd love to buy one but would buy a second one if you guys made a slip on piece for a old Holley carb?!

[@vagabond3045]

Dang where was this when I cut my pedal turned it welded it to work with the lokar style ones this cable would have saved me some time I still my buy this but then I need a new pedal for my c10 hum

[@coreystrong4384]

Just an idea, but can you supply a crimp on cap for the pedal end of the cable? I was thinking a push bike brake cable end crimp type. The amount of times I have cut myself on the pedal while working under the dashboard

[@the_og_scootkentwest7495]

Looks like it will work on hondas with the addition of 2 washers to the pedal end

[@rivermetal]

Great product! Would this work on a 78 Ford F100 equipped with a Quik Fuel 4 barrel carb??

[@rifleman7313]

Would this work with a summit racing, jegs, mr. gasket, etc bug catcher hood scoop or would a factory LS throttle linkage work fine until I can get a better LS throttle linkage such as a motion raceworks throttle linkage?

[@jaxjax5322]

Do you have it for whipple 3.0? And with cruise control?

[@sweak2254]

Do you plan to make one longer than 36 inches? Looking for one to work in a 3rd gen camaro ls swap

[@jjmcq2327]

I cannot find this on your website . This is exactly what i need. Please show a link to the part number,

[@jaxjax5322]

Do you make the bracket with cruise control also?

[@THEKINGOUWANTIT]

Do you have any length options I would love to run it in my 240sx

[@krisjones2265]

Can this be adapted to work with carb?

[@Yaadman69]

You bros planning on selling just the pedal collars separately? Here’s why I ask…I’m still on a Ford Modular throttle body and cable for my setup. In order to take up the slack on my pedal, I’m using a piece of tubing zip tied in place on the pedal. The collar would be a more surefire way of adjusting the cable and locking it down. If you guys do that, I’LL TAKE A PEDAL COLLAR RIGHT NOW!!!!

[@Yaadman69]

@Motion Raceworks Official Is this something y’all can make happen?

[@learysinsight9617]

Are there any options for 2004R TV cables?

[@Projectpompeii]

More ford stuff! ;)

[@ladrebacolston10]

Where is the cruise control linkage?

[@Stinky_G04t]

What about factory ls1 car that cable driven wil this work with it

[@Stinky_G04t]

Did you ever get a ansewer?

[@TexasNova]

Oh look no link available.

[@roygrohler4871]

How long can one get it !

[@roygrohler4871]

Looking for one for a airboat!

[@b00sted_SS]

Where’s Doug?

[@danielblain2961]

Nice product but us hi ram guys need 60 inches

[@carbonconnection2480]

2022: Motion raceworks builds you the perfect female.

[@gandabarrett5169]

Though I would consider that it’s not possible.

[@carbonconnection2480]

@@gandabarrett5169. You haven't seen what a cnc machine can do have you...