Air compressor bbq pit p.2/2

[@andy1982222]

U got some sick fabrication skill

[@bradthurkle7217]

Allen this is a peace of art mate it’s beautiful and it works. Your free hand cutting skills were pretty to watch. It’s people like ya self that put your work up on KZbin make watching KZbin pleasurable. I really like how your always finding ways to improve things its awesome. Keep doing what you love brother!!

[@lawrencebecht660]

Excellent job as always Allen I love your skills and ability

[@Allensweldingwoodworking]

Thanks!

[@doodnathmahabir6387]

Allen, it's guys like you that makes it worthwhile to watch KZbin. Love your work, very soon I'll be trying to make use of your teachings. By the way, I'm from Trinidad.

[@kennymysak2079]

Another great job. I think your idea with the square door and adding the flame cutout really adds to it. Keep up the great videos

[@gogrannygo4431]

WOW! You do amazing metal work. My Grandson has an interest in welding. I'll be sharing your videos with him.

[@SuperDave21]

You could drill small holes in the lid under the flame decoration and rosebud weld them.... to eliminate screws showing from the front, and make the flames fit tighter to the lid.... Great project Allen!

[@fredlandry4691]

Great work Allen.

[@allanrobichaud6872]

Love your work. You are the best freehander with a torch I've seen on ytube!

[@cavemanjoe7972]

You should see him with the oxyacetylene.

[@gloriab9361]

Oxyacetylene is the torch.

[@gloriab9361]

The other is plasma

[@cavemanjoe7972]

@@gloriab9361 They are both called torches. Plasma torch, and oxy torch. Attempting to look know-it-all just makes you a fool.

[@allanrobichaud6872]

Yes, I have! I guess I was lumping his plasma and oxy cutting together. It's his free handing that impresses me! I have both and need an edge guide for most of my cutting. @@cavemanjoe7972

[@gizzard3020]

Looks real nice - good job

[@jorgevega9458]

Your Awesome my brother!!!God bless you!!!

[@thincut309]

Great stuff Allen. Enjoy watching your videos.

[@BigEdriver]

Loved watching you put that plasma table to use. 🤣 awesome freestyle cutting brother. Your craftsmanship is top notch.

[@Fazman81]

I love seeing your work brother, especially when you talk about how to better your builds. Awesome craftsmanship as also, keep the great vids coming.

[@houndogbbq]

Allen if been doing welding and metal work all my life . I just love watching you !! Aces all the way my friend love it !!!

[@MarkK01]

Very nice job, this is my first video of watching you. It takes talent to do what you did.

[@kingjames3507]

Wow. You work and dedication is truley amazing. I have been watching your vids non stop for 2 days now taking as many notes as i can. Im doing a refurbish on a old offset smoker.

[@motoxjim929]

Allen that is one sick bbq pit killer job!!!!

[@KennyInVegas]

Nice.........GBYAY. I look forward to all of your videos. Thanks so much for sharing your talent and taking the time to make your videos.

[@SLUG1000]

Allen That Is Amazing Work Great Job

[@andrewowens403]

I am a big fan good work Allen John from ireland

[@hinds90]

Sounds like business is booming! You deserve it.

[@alexvonbosse5090]

I like the finished product! Nice job! Keep up the good work!

[@rippinglips187]

You my friend are a genius.you have very good skills.i highly recommend you open up a shop and give lessons.down here where I'm from I know a few welders but let me tell you nothing as good as you sir.you do some awesome pits.i would love to buy one of you.

[@Sctronic209]

Allen your amazing that is a awesome Grill

[@BBQJOE]

You got some mad skills..! This will be one kick but air compressor pit when finished. Looking good so far.

[@Hunter12546]

You just keep getting better and better.... I wish you would ship one to me to Australia lol

[@tonypollard244]

Sure wish I could use my plasma cutter that good. Good job

[@frannciscoenriquez6287]

It turn out great! I was looking for ideas to build one,Thanks

[@joewhitfield2195]

I would like to see how the doors are squared on a round BBQ pit!

[@Allensweldingwoodworking]

I have a video up on it

[@jceletroeletronica]

I have a workshop ready. but I can't work. In Brazil, the professional and undervalue

[@Specialized61]

Beautiful work!

[@bogger_welder]

Really like your work and ideas. Keep up the good work 👍

[@yosephferdinand3126]

Allen...There's an art in you👍

[@VW5767]

Great looking smokers you have there.

[@ronhart8857]

Beautiful job Allen

[@clintswindle2460]

Buddy u make it look so easy. Great job awesome

[@philfreiberg3]

Awesome man. Would make a mean little offset.

[@leebolton234]

Man, now you have me thinking about changes I want to make to my smoker.

[@juanmaldonado8922]

Great job Sir never disappoints!!

[@jontrenthem3751]

Really like the orange flames

[@bigchef290]

Great video as always, you're the king.

[@JohnLopez-jt1cj]

Looks really good WTG...👍👍👏👏👏

[@hooligangeneral300]

I’m about to use my old 60 gallon compressor tank to do this. The bottom rusted out. So I’m thinking I should cut that out and flat plate that end.

[@countryboy6738]

Yeap I was right ,,another great build,,like how ya make things easy,,no over thinking just put it on and it'll all buff out in the end with great results,,good job brother look forward to the next 1,,take sone time off and dye those grey hairs in ya beard the camera already adds 10 lbs and 5 yrs lmbo

[@ELCRAIG04]

Great looking pit,,,

[@MrArock47]

Damn, this is real talent.

[@richsellskc]

thanks, brother. God Bless!

[@Wesshaw1996]

You got some new tools nice

[@rodneyyazzie3739]

Nice work brother. Keep up the great work

[@jerrygania4458]

Fine job brother!

[@gregoryarrington7501]

Allen I like your grill they look good and i would like to have one of your man and God Bless you and your family and keep up the good work man

[@thomassandland9276]

Allen you do awesome work i am new to your site keep up the awesome work!!

[@mojoro23]

Very nice!

[@timothyleger4385]

Great work Allen !!

[@nigeace]

Superb work. How much is this bbq?

[@aaronrodriquez3815]

Nice job Allen

[@Imwright720]

Your amazing. I wish I had your skills. Your an American treasure. I always like.

[@stevemackelprang8472]

Nice stuff as usual! Do you know about Fireball Tool? check them out,, good stuff for clamping up square... seems pricey at first glance,, but for doing stuff over and over,, you might like it.

[@Allensweldingwoodworking]

Thanks, I'll check it out

[@duffermod1]

Amazing Job sir. Well done.

[@shawntl]

Great work bud

[@ozziebarton2374]

impressive as always

[@richardsolomon8076]

Looks sharp bro, nice job :-)

[@reptifamily]

hi Allen could explain what kind of paint you using to spray?

[@a3k6g3d]

I've subscribed and binge watched a lot of his channel, but have been wondering why he alternates uses between the oxy acetylene torch and plasma cutter?

[@stevejohnson5922]

U r a master of your trade

[@prince151ful]

I would love too have 1 his grills👍👍

[@wellingtoncarolinocoimbra8219]

Good Job... Fantastic

[@jofieh.5302]

Nice one Allen!

[@minerdad02]

Hey,thanks respect your work,wish you could get Gazzo to bring me one

[@kiphigdon3247]

love the flames on the grille you did how much do those sale for cause it just awesome your work is great and always fun to watch thanks for what you do

[@Cherokee-sz7xi]

Nice work! Where do you find the spring handles you use?

[@juangatticchi3813]

Love your work. Can you make a type of pizza oven? Perhaps convert a rocket stove into one? There has to be more uses for all that heat than just trying bacon or eggs and boiling water. Thank you.

[@shawnstrader1822]

Great!

[@wardy881]

Hi Allen do you use stainless expanding metal for the grills ? love your stuff

[@MrPeach1221]

Did you make the wheels yourself? Awesome work man

[@djbiggz7960]

How much a smoker like this would cost?

[@MrCajjones]

Awesome!

[@allenwalsh8264]

Beautiful work Allen. What brand or type of paint do you use on your smokers. Temperature type as well.

[@jamescooper7800]

Nice man

[@abdullahalonazi3801]

It’s great man

[@builtintennessee5550]

Looks good Allen

[@luistenadominguez183]

Bonita BBQ,saludos desde España 👍🏻

[@joshuasmith6140]

Allen what type of paint do you use in your sprayer?

[@ronlynch6807]

Sweet

[@QBIGORGOHOME]

How thick is the material on the tank? What were the dimensions

[@Allensweldingwoodworking]

It’s thin, I don’t remember the dimensions, it’s an air compressor tabk

[@QBIGORGOHOME]

@@Allensweldingwoodworking thanks for responding! I’m looking at making one out of a 60 gallon tank. I’m not certain on thickness but I’m guessing it’s probably 1/8 thick looks to be pretty think like this one in the video. Didn’t know if it would last long being this thin.

[@iamremyAdventures]

Looking Good Sir...🎥🎥🎥🎥🏆🏆🏆🏆

[@black88coupe]

Awesome

[@bigchef290]

Can you do a kettle type grill video?

[@valoisochoa7250]

Hey Allen as always love your work. How much is the compressor grill??

[@justinrichie2598]

Is this your full time gig now

[@minerdad02]

How much for one like that?

[@marcoacevedo6240]

What's your price on your air compressor grills?

[@Big71Red]

Shit man, you are a beast with the gas and the plasma ;-}

[@ericmoreno6318]

How much for that one Allen? Great work like always by the way.

[@bishop2355]

Where are you located at?

[@Allensweldingwoodworking]

In Vivian Louisiana

[@ajflyingatyomouth2831]

Where are you located? I'm looking for something 250-500 gallon. I'm in South Carolina

[@derekreid2293]

I have an old 275 gallon oil tank that I've been thinking about turning into a BBQ grill... love this guy...

[@alexmartinez3862]

👍

[@percybrown9191]

The dislikes must be sour grapes. Nobody does it better as the song says.

[@chrisbryant612]

How much