Amazing bends on thin chromoly - upgrade the bender you already have! No mandrel required!

  Рет қаралды 12,854

Rogue Fabrication

Rogue Fabrication

Күн бұрын

Пікірлер: 67
@jancramer8140
@jancramer8140 2 жыл бұрын
I really only understand about 5% of what you are talking about, but I believe in you and your products, customer service and knowledge... well done my son!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Awesome! Thank you!
@Mikefestiva
@Mikefestiva 2 жыл бұрын
Awesome Guys! It’s always nice to see improvements and upgrades that still fit all the previous sold RF benders 👍🙂
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thank you Mike!
@roberthosking7524
@roberthosking7524 10 ай бұрын
Best machines out there IMO. Subscribed. Great product. No hype needed to present these machines. They do what they say.
@RogueFabrication
@RogueFabrication 10 ай бұрын
Thanks for the sub!
@BadgerCanyonMotorsports
@BadgerCanyonMotorsports 2 жыл бұрын
Looks great. I love that you guys keep innovating your product. I was super excited when started offering square profile dies.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Have you seen the new thin wall roller yet ;)
@TimWelds
@TimWelds 2 жыл бұрын
Very Cool! Awesome to see the new innovations and upgrades!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thx Tim! We have more HUGE things in the works!
@ronndastapleton4680
@ronndastapleton4680 2 жыл бұрын
As always, well thought out products! 👏 The company I work for has used UHMW material for 30 years and it's amazing! Love that you always strive to be better then the competition! 😁🤞💪
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thank you for the kind words.
@rossschaefer3696
@rossschaefer3696 2 жыл бұрын
Awesome! Will have to add this to the must buy list.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Excellent! It is a fantastic upgrade for the money. -Joe
@jasonkellam1645
@jasonkellam1645 2 жыл бұрын
That is super cool. I thank you for all the awesome invitation. I'm looking forward to what you guys come up with next!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Any time!
@TheDeerInn
@TheDeerInn 2 жыл бұрын
It's really cool to see how much engineering and thought goes into your benders and the bending process!!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Great comment thx!
@TheTomcory
@TheTomcory 2 жыл бұрын
Great bender, I'm building thin wall bmx frames, forks, bars etc.... and with the mandrel I couldn't ask for better bends. Great customer service as well.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
We appreciate you, Lets see some of your work!
@thedude6650
@thedude6650 Жыл бұрын
Looks like a really good product if it really works. Be nice to see some more videos on this item.
@RogueFabrication
@RogueFabrication Жыл бұрын
What details do you want to see in the next video? -Joe
@thedude6650
@thedude6650 Жыл бұрын
@@RogueFabrication I’d like to see it in use. Do you have to adjust it any? Does it limit the stoke of the cylinder or anything like that? If you have electric/hydraulic strip, can you still bend 90 in 1 shot without repinning?
@wilderbeast9368
@wilderbeast9368 2 жыл бұрын
Happy Super Month. 👩🏿‍🦰
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Most definitely.
@wilderbeast9368
@wilderbeast9368 2 жыл бұрын
@@RogueFabrication I needed this as I experienced discrimination recently. Bless you lad!
@Thewatson77
@Thewatson77 2 жыл бұрын
Very nice upgrade 👌🏼
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thx Jonathan
@KJRaycing
@KJRaycing 2 жыл бұрын
I know what I am buying immediately! You guys are absolutely amazing! Thank you so much for this!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Our pleasure!
@blakeshaw4251
@blakeshaw4251 2 жыл бұрын
Yesss!!! This is awesome!!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thank you Blake!
@FlashPerformance
@FlashPerformance 2 жыл бұрын
Love it! Great addition to the machine!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thanks team Flash
@jasonbirch1182
@jasonbirch1182 2 жыл бұрын
Cool upgrade. I have another homemade solution to bend thinwall 1.5" on a 4.5" clr but it's a bit of a pain in the ass. I made sealed plugs that get clamped on the ends of the tube and put 2000 PSI of water in it with a pressure washer and some fittings with a pressure rated bleed valve. As long as all the air is bled out first there's not really an explosive hazard. Worst case it would split and release pressure immediately. 0.93 erw went from from smashed and wrinkled on a 4.5 clr which is rated for .120 DOM, to basically perfect mandrel looking bends. By the way I did my first test S bends on some 1" today for control arms and it came out nice!
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Sounds labor intensive but super creative! And it sounds like it works really well! Clever solution! -Joe
@jasonbirch1182
@jasonbirch1182 2 жыл бұрын
@@RogueFabrication putting the clamps on isn't really too hard. Biggest pain is having the water hoses. One pressure washer hose and one bleed off that had to run outside. You get a little leakage sometimes too.
@robsdeviceunknown
@robsdeviceunknown 2 жыл бұрын
In my limited experience (only used 2 other brands) you're seems like the best on the market. I still plan on getting one (sorry for delay, selling my house and buying another one is taking up my time) but once I can. I am getting one of yours. They also seem far too inexpensive for the quality. But again, this is my speculation. I will do videos on it once i get it by end up summer.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thank you Rob. This one went through over 25 design revisions with FEA (software stress analysis) before we settled on the final design.
@RogueFabrication
@RogueFabrication Жыл бұрын
We plan to release more videos soon showing this in use (more than this video) and likely being used in actual projects.
@boostnhoe
@boostnhoe 2 жыл бұрын
Will this attachment still work with heavier wall tubing if I wanted to leave it in the bender? Ahmad
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Up to .120 wall, yes.
@ernestmurphy3898
@ernestmurphy3898 2 жыл бұрын
very cool, simple and effective.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Glad you like it!
@clintdonovan6257
@clintdonovan6257 Жыл бұрын
This product needs to be free and added to every bender and I'll consider it you should send a free one to everybody with your bender for screwing them the first time
@RogueFabrication
@RogueFabrication Жыл бұрын
We offered them to all existing customers at a substantial discount when we came out with them. E mail or call and we'll make you a deal on one if you bought before we released it and you want one. We're reasonable and take care of our customers, it's the right thing to do. -Joe
@williamlanphar630
@williamlanphar630 2 жыл бұрын
Here we go again...another thing I'm going to have to have....hahaha
@RogueFabrication
@RogueFabrication 2 жыл бұрын
I know. I would say we will stop, but we both know that would be a lie 😉
@williamlanphar630
@williamlanphar630 2 жыл бұрын
@@RogueFabrication hahahaha .....
@RogueFabrication
@RogueFabrication Жыл бұрын
We haven't done much testing, but with the front roller under a mandrel head, this should be able to run WITH a mandrel attachment also... Might extend thin wall performance even farther than the mandrel alone.
@RogueFabrication
@RogueFabrication Жыл бұрын
This is more likely to be helpful on higher yield strength materials that can handle more tension before fracturing... Like carbon steel and titanium. Stainless is worth trying as well. Aluminum is the one that may or may not tolerate this much profile control. Too much friction on aluminum and it will start to crack on the outside as it is pulled though the machine. -Joe
@ThePatriotPath
@ThePatriotPath 2 жыл бұрын
Hey, Rogue dudes. I build armor for Tacomas and 4Runners. I bend a lot of 1.75" round tube in .120 and .090 with my bender from a different company. I'm strongly considering a new bender. I read some of the other comments. From what I gather, I will see a good improvement in the .090 bends, but not in the .120 bends. Is this true? Thanks in advance. BTW, I totally respect the honesty and clarity in your videos.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Sam, thank you for asking. The biggest improvement is on thinner walled applications (wall ratios around 17-19), but it will still have a noticeable improvement on slightly thicker applications like the .120 wall you asked about. I discuss this in terms of wall ratio (not wall thickness), since wall thickness isn't a big deal unless it is included in a ratio with the tube diameter. Your applications are Wall Ratio (WR) 18.4 for 1.75 OD x .095, and a healthy 14.6 WR for 1.75x.120. The higher wall ratio application will have the greatest improvement. The time we tested 1.75x.120 we could still see the difference (improvement) with the naked eye. No calipers needed to prove that it worked! The application in the video is 1.625x.083, WR 19.6. Let me know if this all made sense please! -Joe
@ThePatriotPath
@ThePatriotPath 2 жыл бұрын
@@RogueFabrication Totally makes sense. Thanks for clarifying. Is there any chance you have a shop or warehouse in Southern California?
@RogueFabrication
@RogueFabrication 2 жыл бұрын
@@ThePatriotPath Sadly we do not only out in Oregon!
@ThePatriotPath
@ThePatriotPath Жыл бұрын
​@@RogueFabrication Is the mandrel attached compatible with 1.75" 4.5"CLR for .120 and .090 wall thickness?
@fonts11
@fonts11 2 жыл бұрын
New to Bending, Would I want to use this on say .095" 1.75" tubing? I currently have the 6" Radius Die.
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Yes. Not with .120, but on .095 you would see a noticeable improvement. -Joe
@RogueFabrication
@RogueFabrication Жыл бұрын
We've done more testing, there is a mild (still noticeable) improvement on even .120 wall tube (on 1.75 x 6 die) with this TWR! -Joe
@Go4BrokeOffroad
@Go4BrokeOffroad Жыл бұрын
Will this work on other benders?
@RogueFabrication
@RogueFabrication 6 ай бұрын
Our dies do not work on other benders, cannot speak for what others capabilities are!
@clintdonovan6257
@clintdonovan6257 Жыл бұрын
If you guys would have done this right the first time I wouldn't have sold my bender and everything with it and talked as many people that would listen out of buying your bender I really love the clamp lock system and being able to put multiple on the same tube made your product A1 if the og wasn't junk but now I'm not selling my jmr to get this whole setup. Real shame
@RogueFabrication
@RogueFabrication Жыл бұрын
We offered them (this TWR, or Thin Wall Roller) to all existing customers at a substantial discount when we came out with them. We also offer people a deal on mandrel setups if they are struggling with bend quality on an application they expected better results on. We aren't trying to hide any of this information or the results. We're reasonable and take care of our customers, it's the right thing to do. -Joe
@landlockedviking
@landlockedviking 2 жыл бұрын
How will it handle 2" .065 wall?
@RogueFabrication
@RogueFabrication 2 жыл бұрын
There was a very fake looking comment here that was a phishing scam. We reported it as spam, and deleted it. Sorry for the clutter. We've bent some 2" x 0.065" and it is TOUGH. You can call for the full story. It works (barely), it make work better in the future. -Joe
@garagegurutv6419
@garagegurutv6419 2 жыл бұрын
Once again Rogue Fab. hits it out of the park! We can't wait to use this on our next project!! Check out DJ building a Rogue Fab bender from start to finish at GarageGuruTV.com
@RogueFabrication
@RogueFabrication 2 жыл бұрын
Thx guys. And to anyone else reading - the Gurus do a great job on their videos. They're worth watching! - Joe
How To Make Rectangle Tube Bends WITHOUT a Bender in ANY Size + Radius!!
23:41
Bend Quality 101: Die Profiles, Ratios, Diagnosis, and MORE
24:52
Rogue Fabrication
Рет қаралды 6 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
TFS: Tube Bending Basics 1 - What You Need to Know
24:43
The Fabrication Series
Рет қаралды 2,8 МЛН
Using BendTech to fab a tube with cuts and bends
19:04
NTD Racing
Рет қаралды 31 М.
Roll Bend Tube With no Roller! Bump Bending 101 - Large Radius Bends
17:59
The Affordable Bender Tube Bender.  Everybody's first tube bender?
18:49
Mastering Small Tubing bends: A Step By Step Tutorial And demo
5:23
Blue Collar Drew
Рет қаралды 99 М.
Using the $209 Roll Cage Tube Bender from Amazon!
12:34
Trail Time
Рет қаралды 26 М.
True Cost Of Owning A Tubing Bender -
20:29
Petrol360
Рет қаралды 66 М.
How to Shape Pipe: Rolling vs. Bending - Kevin Caron
7:33
Kevin Caron, Artist
Рет қаралды 659 М.
Don’t Choose The Wrong Box 😱
00:41
Topper Guild
Рет қаралды 62 МЛН