How Heavy Duty Truck Tyre Rim Plate Are Made From Old Ships Sheets || Repairing of Broken Tyre Rim |

[@александрпусенков-м3ю]

Необычно среди черноволосых ребят увидеть парня с шикарной рыжей бородой! Ребята молодцы! Всем здоровья и удачи! Привет из Беларуси!

[@user-krupski]

В Индии очень много с покрашеными в рыжий цвет волосами и бородами.

[@user-krupski]

@user-pi8xt2kr2u В Пакистане я не был, а в Индии был и видел много мужчин с крашеными хной рыжими бородой и волосами.

[@ТоварищМаузер-н5ч]

​@user-pi8xt2kr2u А какая разница?

[@Сер-щ8с]

Возможно его отец русский или украинец бывший воин-афганец попавший в плен, принявший ислам и живущий в Пакистане

[@raZZkataeV]

​@@Сер-щ8сони хной красят волосы и бороды

[@ernestcotton9324]

These are skills that really are needed in many places, reduces waste and expense on repairs

This only reduces costs if the workers do not get paid properly. In most places around the world this repair would cost more than a new high quality rim.

[@ernestcotton9324]

@PekkaKilpelainen true, but I'm impressed with their ability to recreate the proper hub for this. The welding has to be good or it would not be so hard to machine the center out

[@АЛЕКСАНДРРЯПОЛОВ-й1т]

судя по сварочному шву диск уже ремонтировали))) на долго не хватило почему-то)))

[@Чингиз-ф1я]

Электроды наверное бракованные, либо прямые, вот когда оригинальными кривыми варят, то всё, это раз, и навсегда😂

[@thunderbirdone8126]

The holes were indexed and punched true to the bore which was right because it makes the bore a good reference surface. Then they take another cut on the bore which was true to the bolt holes but now no longer. Now they have created a wobbly bore which is out of true to the bolt hole circle. The rim in the lathe should be cut to fit the rim face, not the other way around.

[@williamjones2537]

Where did the rust red paint go? The guy painted the rim only to see the paint gone when they installed the wheel. Explainations?

[@pmcKANE]

I love to see stick welding being used so much! It's what I learned first and I always come back to it. We really are spoiled with MIG and TIG. When it comes to big welds on heavy steel it's really hard to argue with what you can do with just a stick!

[@Rich77UK]

I've seen stick welding machines that were used in WW2 to weld armoured plate together on German tanks. The welding rod is like a fence post!

[@МихаилЯковенко-й4к]

Грузят как в товарный вагон , вот и отлетают колеса . Диски не выдерживают .

[@SUBARUVOD-gw5vf]

Не только диски, там балки рессоры мосты всё пополам, у них много выпусков посмотрите 😁. Но мне нравятся эти ребята, они всё в буквальном смысле ВСЁ ремонтируют, восстанавливают и работают дальше.

[@MSK239]

​@@SUBARUVOD-gw5vf ага, особенно круто было когда у грузовика цапфа поворотного кулака под корень обломалась, а эти ребята не долго думая приварили, напильником пошваркали и норм, чо, проходит ещё ))

[@vippersona8925]

Дагестан нервно курит в сторонке😊😊😊

[@yacineg1439]

مبدعون والله بإمكانيات بسيطة جدا صنعتم الإتقان بارك الله فيكم

[@normanedwards7220]

The quality and craftsmanship of the original wheel ( the one that fell apart ) tells you all you need to know , this is on par with polishing a turd

[@Gantzz321]

except a turd is still useful as fertilizer in a field

[@ronaldhamblin4615]

These guys have so much skill and yet no one seems to care about their wellbeing as long as thay work hard and get the job done total respect to you all great engineer's

[@333movie]

8:47 / 27:03 How Heavy Duty Truck Tyre Rim Plate Are Made From Old Ships Sheets || Repairing of Broken Tyre Rim | Amazing Mechanics 구독자 9.09만명 구독 3천1백 150 공유 오프라인 저장 클립 조회수 2,290,643회 2023. 6. 3. UNITED STATES How Heavy Duty Truck Tyre Rim Plate Are Made From Old Ships Sheets || Repairing of Broken Tyre Rim | #how #heavy #duty #tyres #rim #plate #are #made #from #old #ship #sheet #repairing #of #broken #tyres #rim #amazing #mechanics Amazing Mechanics 구독자 9.09만명 동영상 정보 댓글 252개

[@Atomics1979]

Варить прямо на токарном станке, а потом еще пытаться удержать резец-это трындец господа...

[@pnireset]

Качать грузовые колёса без клетки... Или бессмертные, или у них никогда не срывало кольцо и не взрывалось колесо.

[@andymedina3358]

These guys are expert in what they're doing, there's no PPE at all wearing sandals working with their bare hands I salute these guys ❤❤❤

[@FranciscoMeza-o8k]

Estos hombres son muy trabajadores en los rines ni se deberían repararlos x que ponerlo en el eje delantero es muy peligroso? En México lo aventamos ala chatarra y esos tipos de Rin pasaron ala historia hoy en día puro Rin sin aro y llanta sin cámara.🤝👍👍👍👍👍👍👍👍👍👍👍

[@PauloEzequiel-yk6gk]

​​@@FranciscoMeza-o8kMéxico tá aí um povo trabalhador também muito dedicado🇲🇽 👏🇧🇷🇧🇷

[@pongchua4927]

Don't report it in osha asian don't like osha

[@brianalder2234]

Yeah ! No pampering for these guys ! Get it done 😂👍👍👍👍👍👍👍👍👍👍👍

[@LanceReventlowie]

This is important. People using a skill to make something of use. I love this video and what those in it do.

[@PRODlK473]

Помню как снимали диск на ГАЗ-66 в 1996 году. Вот это эпопея была😊

[@Виктор-ц9э1о]

То же дело было , только в 1987 . Машина с капремонта пришла , а резина лысая ))) БАТом давили ....потом выбросили , вместе с диском .

[@Channelbengkelkampung]

Thanks for video processing rim heavy duty

[@gabrieldelanne5482]

Você deveria ter torneado toda a roda para tirar o empeno que a mesma possui para que não haja ruptura da solda por trepidação quando a mesma estiver montada com o pneu e rodando no caminhão. Fica a dica.

[@ЯчсмМсчя-ц8с]

Сизлар мехнат севар халк экансизлар рахмат ....

[@Rich77UK]

10:04 Old Jock McTavish doing a fine job, punching holes.

[@howardsimpson489]

I would like to know how they earthed the chuck before welding, the inner rim edge was at least 3mm out of true, these wheels are obviously not intended for high speed. Love the hydraulic punches.

[@daveheiskala7007]

I didn't see any grounding of the parts he was welding. Magic...

[@VetvsWorld]

We think a lot alike, I suspect sir. 🤣

[@donaldjohnson633]

They probably ran the ground to the lathe frame. Which in turn ran all the welding current through the headstock bearings. Oh well.

[@raymundotoledo8019]

Exelente sin tanta tecnología exelente más aún la capacidad humana y buena disposición de sacar adelante su país saludos desde dallas tx

[@the_Splosh]

I’ve watched far too many of these videos and I’m amazed these guys still have all their fingers toes and eyes.

[@Ron_Masterjohn]

They need some Plasma cutting machines. Cost much less than all the gas for the cutting torches,😊

[@gitar1hero1qaz]

Oxy acetaline torch is More versatile than plasma

[@DimDim76]

Краилово всегда ведёт к попадалову ☝

[@ecleveland1]

These people don’t throw anything away, they just keep rebuilding or repairing it forever.

[@Olim-l3m]

Суппер работа......

[@rogerrolex6981]

Nice steel toe sandals 😢😢 Amazing all this steel comes from huge ships they dismantle beached on their shoreline by hand it’s ridiculous 😂😂

[@robmar7190]

Western countries are planning on replacing 🥾 boots for sandals 🩴

[@timharris-kr2hp]

Well do you think they gonna fly somewhere else to be stripped, this is their way of living, some of the hardest working people in the world...at least they not on Well fare!

[@richardloup4508]

Blows my mind! Y’all are very very talented my brother!

[@ayanahmadefase7980]

I do this job in my country

[@markjlewis]

The original probably failed because of a dodgy weld. Looks like they are replacing it with a piece of steel with an equally suspect quality.

[@ПавелПивовар-з7б]

На таких колёсах водила наверно по всей машине скачет😂😂😂😂

[@АмиранШаринРоссия]

Это пипец,качество-жопа

[@REDKING-yg7uy]

конечно наше российское куда лудьше ....

[@yuriysaygon3383]

@@АмиранШаринРоссия Это Афганистан, там всё такое, и ничего, по горам едут и радуются. На скорость не влияет.

[@flashgarage]

​@@yuriysaygon3383 Пакистан это

[@amigos174RUS]

​@@REDKING-yg7uy Сделай лучше, а не ной ! все в твоих руках!

[@claudiodevita8062]

Complimenti Siete dei grandi lavoratori❤

[@Kris5344]

15:28 I like how guy just uses large countersink drill bit as a very expensive hammer (one of those bits is at least few hundred dollars).

[@ID-8491]

0:06 This is the first time ever that i see such a catastrophic failure of a part that is vital. I'm guessing that it was made in one of these primitive shops, from scrap metal obviously. 1:31 Oh my... These bits you talked about are probably made of glorified alloy of high quality metals and pot metal. Nr 1 Best Top Quality.

[@Rimrock300]

They are pretty advanced in this shop compared to many others, no sandals, and use of gloves. Thumbs up

[@schizy]

*Steel toed sandals?*

[@Rimrock300]

@@schizy Leather toed dress shoes. Keeping style

[@KobusCola]

Yes they are smart and good in what they are doing not as bad as the country I am living in.south africa

[@michaeldoit7920]

Y'all should think about using work benches so you don't have to squat all the time.

[@joshchoate9499]

It's a Muslim thing they always squat for everything

[@glennschemitsch8341]

They squat all their life.

[@jurgenungerer2475]

Ihr habt ja wenigstens geschlossene Schuhe an, aber die nützen auch nicht wirklich wenn da Metall auf den Fuß fällt 🤔

[@richardradawetz8788]

Nice welds. Great ingenuity

[@firstielasty1162]

Lacks precision? Maybe so, but an out of round wheel will have the same effect as a rough road. Probably what this wheel will spend its life on. So, great job! Turned scrap into something useful. I do a lot of tig and machining, this video is a good reminder to adjust standards to what is really needed for the job. Stick welding always strikes me as crude, but it's really not.. the welder here and the rod (6011, 6013...??) seemed tolerant of the not so clean metal. It looked pretty good from here. I notice a lot of 2 piece rims on shipping container trailers running around here on i-78 that don't run true at all..what was made here looks at least that good.

[@YimiGarcia-i4u]

Lo que más me gusta es la gran seguridad industrial que tiene está gente, así cómo el caco,los guantes y las botas 👍

[@robinzonrolandolopezlopez6093]

Saludos. Felicitaciones por su trabajo y a su ves preguntar, que tipo de electro utiliza para soldar...? De antemano muchas gracias por su amable atención y pronta respuesta. Saludos desde Pomasqui - Quito - Ecuador 🇪🇨

[@АндрейОрлов-в2н]

Крутые парни!!! Сильно!!!

[@АндрейВолодин-ь2г]

Золотые руки! Только бы вам ещё спецодежду!

[@rockvillemike6062]

When I see that stack of plates to make wheel rims I can't help but think, are that many wheel rims failing? Then watching this video I can see why. No heat treating, making rims from pieces welded together, too many holes on the sides sapping strength, and probably no proper balancing. It's no wonder they fail so often when I see them cold pressed into shape, and then no follow-up heat treating. But alas, that's life in these challenging situations and for them, life goes on.................

[@DVNelson]

LOL...I was thinking the EXACT same thing. Like you have THAT MANY wheel failures???

[@timothygeiger8271]

Remember, to them it's cheaper to repair the same thing 4 or 5 times verses 1 to us.

[@wellingtonaraujo8169]

@paulolandim

[@georgelin8498]

Tire has good tread wheel was probably fairly new when it broke

[@sobihinsobihin8035]

0:07

[@damanjeetsingh2350]

کمال ہی

[@mauricestevenson5740]

I am stunned to see what damage wheel rims sustain in Pakistan (or wherever) and the methods of repair applied. Remind me to never go to Pakistan (or wherever) and certainly never to get on a bus there. By the way, what chances that the red-orange paint being painted on the rim towards the end feature lead on the list of ingredient? (Probably nil: it would be too expensive...)

[@antonioaraujo3029]

Parabéns belo trabalho. Perfeito com muita dedicação. 🇧🇷

[@nivaldohatencia]

Bom trabalho Duvidas: o custo dessa recuperação não é maior do que comprar uma nova? Compensa recuperar?🤔

[@PRODlK473]

Конечно дороже! В развитых странах это не рентабельность тем более качество ремонта без гарантий!

[@bobmurray3229]

These guys work hard. I love the drill bit hammers

[@jamielee9350]

I wonder if Milwaukee will ever catch on to this 🤣🤣🤣

[@gorillaau]

Appreciate the idea of using a broke drill bit to knock out the other drill bit, but using a bit that is still in use is scary!

[@r1learner178]

That press really tests those welds. It was all going well until he put the rim in the lathe - nice touch trapping the swarf between the rim and centre. Nice welding but (mostly).

[@jodhanmaskay9032]

This guy's are really talented and hard working.

[@howardchandler3368]

Awesome job 👏 👍 🙌 👌

[@TariqMehmood-mc9tc]

Excellent Worker team doing good job

[@georgegonzalez2476]

A few issues: (1) Steel from a scrapped ship can be of variable quality. If it's from an area of high strain, the steel may be substaintially weaker than expected. (2) The guy punching the big holes doesn't seem to be using a template or guide. So the holes may be misspaced and the wheel will be a bit unbalalnced. (3) The lathe cutting tools are not ground properly to break off the chips.

[@noahingram8052]

Great job

[@musawwirananta2091]

Good job...bro

[@screwsnutsandbolts]

Great video ! 👍

[@robmar7190]

Removing the tire ring’ in the 70’s while stationed in Germany we would get lots of flat-tires on the tank trails dropping gravel’ we would use pick’ax to break the ring to change flat tires’ You stand on the tire and work you way all-around and it would come in-done! We had 5 ton dump trucks 🛻 usually carry Bailey Bridge!

[@salihsalih5765]

elinize kolunuza emeğinize sağlık olsun rabbim yar ve yardımcınız olsun saygı ve sevgilerimle selam ve dua 🤲 ile Allah’a emanet olun

[@knobsdialsandbuttons]

Superb videos ! 👍👍

[@hsmidkhoshdelHamid]

Perfect ❤👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻big like

[@thebearsden1701]

Absolutely amazes me what they do with crude tools ..!

[@kingvorgg6766]

Assalamu Aleykum. Good job 🎉

[@VetvsWorld]

Cutting through marine grade paint? Get some respirators! Old dude running the grinder like a boss!

[@evergallardo8259]

Aprendo mucho de estos trabajadores, y cosas que no tenía idea de como se hacía, son muy ingeniosos y trabajadores

[@GoprakGroup77]

Wau... Good job bro.. Thanks for sharing...🙏🙏🙏

[@denishennessy1318]

Excellent. You know that ain't coming apart anytime soon

[@hiendavid1042]

Thấy các bạn làm thật chuyên nghiệp làm tôi cũng muốn theo nghề mà không biết bắt đầu từ đâu. Chúc các bạn nhiều sức khỏe. Lời chào tới từ Việt nam

[@eliorarojado1489]

Talented workers. Greetings from the Philippines 👍🏼👍🏼👍🏼

[@juancarlosvargasdiaz7748]

Muy buen trabajo pero la seguridad del personal ineficiente Zapatos Guantes Lentes protectores su personal es lo primero ellos tedan un buen bienestar me imagino que le pagas un sueldo para puedan vivir com su familia.

[@Matias35666]

Magnífico el trabajo qué hacen. Saludos desde Santa Fe Argentina

[@daveheiskala7007]

It's amazing what people can do !

[@anilpille189]

Beautiful works God bless you all ❤️

[@israelgalindo6600]

Can you imagine how overloaded the truck must have been to have caused this‽!!

[@Moradi.mohamad]

زنده باد مردم پاکستان.با دیدن این کارا من لذت میبرم.چون هیچ چیز رو دور نمی اندازند.همه رو به شکلی تعمییر میکنن و دوباره استفاده میکنن.من از ایران هستم.صنعت شما قابل تقدیر میباشد❤❤❤

[@mbcomunicacion4088]

Mi felicitaciones esta gente son increíble son lo máximo lo único que veo es que yo no usan botas en mi trabajo no aceptan a nadie sin traje de protección sin bota y sin guantes y sin lentes y casco

[@MadmanJimbo]

We overload wheels enough to have a factory to repair them. Wtf.

[@briancleveland6115]

And that's how you turn 100 dollars worth of scrap metal into a hundred dollar wheel 👌

[@TheMik088]

I wonder how many people are killed by exploding truck tires over there.

[@loveofchrist5808]

I forgot what those rims are called but you’re right those are outlawed here in America and I’ve seen them in other countries where they use them like any other rim but just look at the video here on KZbin that shows them blowing up. Jesus Christ of Nazareth if anybody else is using these rims make sure to protect them from these rims that could blow up at any time I ask this of you my Lord and Savior Jesus Christ of Nazareth amen.✝️✝️✝️🙏🏻🇺🇸

[@carlosfilho5924]

Excelente trabalho, parabéns.

[@abuhamh11]

هذا مطوع إنسان في اخلاق 💯/💯،لو في نفر ثاني لازم جديد

[@leecornelius1424]

Yes but we have Oshawa and lawsuits to dill with if parts fail and someone gets hurt don't see any of there welds being exrayed

[@ID-8491]

X-ray? It is still not discovered in Pakistan.

[@niko-laus]

when they put the holes in you can see this is not high grade steel hence they brake so easy

[@longbar2344]

yep. thought that the whole way though.

[@donaldbaker6961]

Wow absolutely amazing 😊

[@h.8731]

Hallo Leute😅also das ist echtes Handwerk 🎉hier im Westen kann das keiner 😅😮hier wird es weg geschmissen😢. Der Bericht ist echt super 😅🎉🎉😂❤

[@classicalmusic9658]

You guys are great despite the primitive tools

[@nurikucuk]

These kind of workers created the damaged rim. That’s why it is broken. It is a paradox.

[@udo5479]

Looks like Ship Wreck Steel

[@chbengtan7266]

Safe? The whole rim was not monolithic but just welded on !

[@sebastiaopedro9508]

Top demais parabéns 👏👏👏👏

[@stephenaquilina6628]

Welding was done very neatly but why not working on a work bench instead of working on the floor,much easier.👍😉

[@glennschemitsch8341]

There are no benches in Pakistan.

[@zouaouiazouz4461]

اللهم صل وسلم وبارك على الحبيب المصطفى محمد وعلى آله وصحبه الكرام

[@onestepbeyond7240]

Redwing makes safety sandals.

[@demen4557]

Что вы негативите в комментах? У нас уже 85% не знают, что такое штанген циркуль, уходим в 100% потребители, а парни не от хорошей жизни все делают и переделывают. Станки все норм и пользоваться умеют, молорики

[@samhendra7460]

Best part, when man hammering the plate, it's seems like stress released 😂

[@awmpuiachhakchhuak3664]

Great skill...work hard

[@MSword-si4dg]

This channel name should be Amazing Fabricators

[@artiwadke89]

या भागात देवीदासभाऊने उत्तम संदेश दिला आहे.

[@RODRIGO-TRINDADE]

Tem até irlandês trabalhando na fábrica!!!!!!!🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@ajiejoe7848]

Wow. They have the idea but with minimal cost maintenance. May be upon of my point of views, if everything is well treated, business be slow.😅

[@Renatousa17]

Excelente trabalho,