I got two bigger holes on the bottom of my fairing, and the two holes of top are smaller, but the same bolts looks like I’m gonna have to drill them bigger or get different hardware
@grimnogravity2 ай бұрын
.
@CezaryDubaj6 ай бұрын
Looks sick👌
@grimnogravity6 ай бұрын
Thanks man
@SeaSaltCeo2 ай бұрын
were the top holes on the fairing too small for the bolts that came with it
@grimnogravity2 ай бұрын
No I didn’t need to drill anything. I did have to get longer hardware and washers to help the brackets sit properly with my triple tree clamp
@SeaSaltCeo2 ай бұрын
Thanks man I ended up getting it installed. I had to bend one side of the fairing bracket to get it to sit on my handlebars, but I am having an issue with the headlight not sitting flush. I have a gap between the top portion of the light. Still looks good, but the headlights not sitting quite right.
@tylerhubbell6410Ай бұрын
Loosen the nuts that hold the fairing to the brackets then adjust from there.I got my fairing from throttle addiction for my 2018 iron 1200 and they claimed it didn't fit anything above 2016 but after loosening up the 10mm nuts and some adjusting I got the fairing to sit flush with the headlight.
@SeaSaltCeo2 ай бұрын
Whats the height from the the top clamp to the top of the fairing
@grimnogravity2 ай бұрын
Triple tree clamp for the fork or the clamp on the fairing?
@SeaSaltCeo2 ай бұрын
Clamp on the fairing
@SeaSaltCeo2 ай бұрын
I’m trying to gauge how high it’s actually going to sit. I have an 04 xl 1200r I have the tack and speedo
@SeaSaltCeo2 ай бұрын
I also have the no brow do u think I’ll need a headlight bracket
@grimnogravity2 ай бұрын
@@SeaSaltCeo the fairing has about 2 inches of adjustment up and down and has forward and backward adjustment aswell. Then you can also slide the fairing up and down on the forks. You shouldn’t need the brow as you can add washers if need be with longer hard ware. And your previous question my clamps are a half in from the top triple clamp and is 9ins to the top of the fairing with my current adjustment and setup.
@sethj57674 ай бұрын
Did u have to bend the brackets to make it work mine legit won’t even fit on my bike for shit
@grimnogravity4 ай бұрын
No I just kept all the bolts loose while fitting it up to the forks and light then tightened everything down
@SeaSaltCeo2 ай бұрын
I had to bend my bracket only one side, but it ended up working out