SOMETHING NEW 2020 KENWORTH T680 76" MID ROOF, MX 510hp 13 spd Ultrashift

[@TheBitcoinBoomer]

Nice to see the DEF tank on the correct side. What were they thinking with putting it on the passenger side? What a pain! I also wish they would put the fuse panel in a place where you can access it....even back in the glove box would be an improvement. C9 is ridiculous to get to.

[@vickieanderson2326]

Iam glad they finally decided to add sun visor,love it.

[@AndyTheKenworthGuy]

It sure is nice

[@billunderwood8975]

BTW I hauled my first load of logs in 1977 in a 1967 Diamond Rio with a 355 HP Detroit Diesel and 5/4 transmission that had to be shifted with both hands. I was 14 years old, and when a trooper pulled me over, and asked me if I was 16, I lied and told him I was. He told me to be careful and left. A boy was expected to pull his weight back then...

[@AndyTheKenworthGuy]

Old school for sure!

[@negg6509]

IT is no necesary to use two hands in a 5x4 i drove oilfield trucks with 5x4 4x4 6x4 10 + 4 13 +4 allison + 4for many years

[@glynncrook9211]

Nice to see a visor added to the t680. It’s about time!

[@brucelhommedieu1276]

It should have a X15 Performance engine, 13 speed, and the side skirts and exhaust up the back. Sorry, Andy that's just me.

[@AndyTheKenworthGuy]

No worries. We build them custom. Your spec is yours! Thanks for watching

[@bradgrimm6982]

Fuel is about 1mpg worse on the x15 vs mx, and similar performance, we just ran both the 2020s this year.

[@47rintin1]

@@bradgrimm6982 The guys who don't pay attention on the fuel consumption, so like to have a Cummins, will earn less or will lose market at the end.

[@keithsorlie9798]

Great video. Can you provide part number or information on the tow hook fog lights?

[@88Petry]

This truck is only missing 4 things. - Studio sleeper package like the W900 (the sleeper couch). - Seprate sleeper entrance door, like the Peterbilt 579. - Digital speedometer readout. - Pull out ladder for the top bunk (again, like the Pete 579). If this truck had those options, than this would be the best truck on the market IMHO.

[@albertorios8061]

Beautiful truck!!! I would like to hear how that MX13 sounds... I remember you did a video with Cummins X15 sounds some months ago... Would be super nice if you do that again with other engines like Cummins L9, X12 or Paccar MX11... I've never listen one of those 2 last in person... there are not many engines like those here in México.

[@AndyTheKenworthGuy]

Will do. Stay tuned

[@47rintin1]

This a video with the MX-13 sound. The MX-13 is a DAF engine made in The Netherlands. Here the engine is built in in a DAF Truck. kzbin.info/www/bejne/o562e5hmp66bp6c

[@Trucker_Josh]

Haha I knew you were Canadian as soon as I heard you say TOQUE! 🇨🇦

[@AndyTheKenworthGuy]

Haha.

[@albaniansk8er]

I’m glad they finally decided to but the fuel filter inside the power steering reservoir 😂

[@randallgates3679]

I was so excited to get a brand new 680 about 5 years ago. I ran it for almost 300,000 miles. It was an absolute piece of garbage. It leaked water and got moldy in my closet. The interior is cheap plastic. The handles on everything inside would break. The fender lights would always fill with water. I went through 4 sets of steer tires as it would never hold its alignment. Always in and out of the shop with engine issues. Typical Cummins crap engines.

[@billunderwood8975]

Yep ... J.U.N.K.

[@MrAtrice]

Thought he said this had a paccar....

[@AnthonyHill77]

@@MrAtrice Paccar, Cummins basically samething. Cummins makes the paccar

[@MrAtrice]

@@AnthonyHill77 the older Cummins seemed pretty darn solid to me but the new ones with the Def is a pain ass with my minor experience trucking

[@aztxtransport2776]

Nicholas What year cummins ur taking about? I have old cummins 2005 only issues its seeping oil but it got a million miles, my buddy got 2017 660. Problem free. Only those i heard of are 2009-2013.

[@triptriplett4285]

I am buying a new truck the end of March it will be a second truck for a driver. We would like to get the 990 but just cannot justify the cost when we can a Lonestar hard loaded with electric APU for less than 150K, Kenworth wont budge under 165K for the same power train spec in a truck that is not loaded & no APU. Does Kenworth really think the product they offer is that much better? Kenworth builds great trucks in my opinion, I just can't afford them.

[@lungelinecowboy]

$15,000 can be easily made back on the resale. Check out the used values on any international right now. Those lonestars have specific parts just for that model that can also be quite costly. The other thing is that international has a horrible reputation right now for reliability. The market is saturated with used trucks and might be a good time to buy a used low km pacaar product if you can't afford a new one. I know a guy that has a 3.5 year old w900 with apu that was offered a pathetic $75,000 on trade in.

[@triptriplett4285]

We have been all over the resale thing & I see Paacar not bringing a lot over other manufacturers. As for reliability, we own 2 International trucks & could not be happier they are both 2019 models with the redesigned cab & interior. We paid $113,000 for our Lonestar with 80,000 miles on it & $125,000 for our LT new. They have the same drive train as the KW’s Cummins & Eaton with Spicer rears so wouldn’t it make sense if we have major repairs on these trucks we would have the same issues with Paccar? I really like the interior fit & trim of the KW they have great build quality, my only issue is justifying the 30k price difference. As for the Paccar engine, I’m not ready to go there plus the resale is not good with a Paccar engine.

[@triptriplett4285]

The. LT belongs to my boy, he is trying to convert me. If I could find a 990 for 150K I would most definitely buy it

[@DauminiqueTheDumpTruckDriver]

I like the seat that spins around. It’s been a long time since I have driven a 13 speed though.....wait my truck lost 7th and 3rd about a month back... I guess that was technically a 13 speed 😬

[@AndyTheKenworthGuy]

Thanks for watching

[@danielwebb9306]

Kenworth is doing a great job an that truck looks awesome it sure beats those old coffin sleeper say Andy can you do another tour at the Kenworth production again

[@AndyTheKenworthGuy]

One day I will for sure. Nothing planned for a while now.

[@vovasig4517]

Hi Andy, Paccar offers 530hp engine since 2018 on DAF trucks here in Europe,it's strange they didn't do the same for NA line.Good vid as always.Be cool.👍

[@waynenorbreyjr9371]

I did notice the visor, I guess with the W990 using the same cab and sleeper and having the visor it's able to be offered on the T680 and possibly the T880. Another great video and a great looking truck.

[@AndyTheKenworthGuy]

It’s the same part as the W990. I’m looking forward to putting more of these out there.

[@dustinrieck312]

That looks really good with the visor changes the look !!!!!

[@dustinrieck312]

To set it over the top a set of stacks on the side would of been awesome .

[@stewstewart1798]

Hey Andy, like the new intro! Knowing that you guys don't or can't talk specific pricing in this type of forum, was curious about the relative price difference on a specific option and if you could speak to that? If you are able, could you tell me the approximate price difference in the Endurant 12 sp and the Eaton 13 sp AMT?

[@s1k2y3e4]

Would like to spec a midroof truck for bulk chemical tanker. Need to be able to haul 45k of product. In a freightliner now but would like a better seal on the truck. Have had issues with water leaking in and shorting out electronics. I've heard Kenworth and Pete both have a excellent seal. I have driven a one Kenworth and the turning radius was terrible (larger wheel base I think?). I have also heard the mx engine had some issues with engine pitting. Just trying to get more educated on speccing truck for the bulk tanker application.

[@dkhumphrey5713]

Visor is long overdue. Looks good.👍

[@AndyTheKenworthGuy]

Sure does

[@waynecribb4922]

Nailed it!! Great idea. Really looks great!!

[@AndyTheKenworthGuy]

Thanks

[@mediainc.]

Weird Background music... your presentation is more important than Pub music

[@jajasuharja9202]

Thank's Video's for The Kenworth Guy,I like Kenworth Trucks 👍💯% thank...thank...

[@EgeGrin]

This is realy good truck. Kenworth is best of the best truck for me.))) Thank you Andy for this video, very informative,technically clear.

[@largecarken8504]

Your the worlds best Andy. Very practical truck.

[@AndyTheKenworthGuy]

No you’re the worlds Best Ken!

[@Kwobler]

Why and I mean why. Would you put lights in the tow pin sockets. They are for tow pins. Like mounting those little rabbit bumpers in the tow pin hole. Then get stuck and guess what. Your really stuck. Have to remove items to have access to pin sockets. Is that really a good idea to do that.

[@AndyTheKenworthGuy]

The pins slide in beside the lights. The hole is still open.

[@terrellp22]

what dealerships are selling them in the US? seems like they only sell high roofs

[@farmcentralohio]

The passenger seat setup should be standard on all trucks

[@garfieldthomas8118]

Why does Paccar offer Multi-Torque ratings for their MX-13 engine? For instance, if you wanted 1750 lb-ft of torque, you'd have to get it at 1550/1750.

[@AndyTheKenworthGuy]

Correct. If you want more torque get the 510 1850

[@garfieldthomas8118]

@@AndyTheKenworthGuy Do you get feedback on fuel mileage w/1850 lb. ft. of torque?

[@AndyTheKenworthGuy]

Depends on application. Super b trucks we see around 5.5

[@garfieldthomas8118]

@@AndyTheKenworthGuy Alright. Thanks

[@TowWyo]

Is the inverter hooked into the chassis batteries or the KIMS batteries? How are the two sets of batteries connected?

[@AndyTheKenworthGuy]

The two sets are independent.

[@dreadzjackson5349]

Its about time kenworth optioned it with a visor. It should've have taken till the w990 was released

[@AndyTheKenworthGuy]

Agreed

[@dreadzjackson5349]

@@AndyTheKenworthGuy as a factory how does it cost

[@fabeiontatum205]

In that tractor trailer truck do it got CB radio in there

[@davantaycorey9292]

I want this truck so bad!

[@dillpickle8277]

What in the world did you just call that toboggan

[@brookerleerich]

Finally, a VISOR!!! Yay!!!!

[@AndyTheKenworthGuy]

Yup

[@watchman79kreider61]

What is the blinking LED on pass side A pillar?

[@AndyTheKenworthGuy]

Side impact detector.

[@watchman79kreider61]

Ok. Thank you! Great videos!

[@Turbo-6]

Another great video, thank you. Rear end gears and last ratio in transmission?

[@AndyTheKenworthGuy]

Hey Mark. 3.7 and .77

[@myofbmyofb5943]

How much with 605 Cummins 18 speed. 73 ratio in trans 2.64 differentials 150 gallon tanks biggest def tank they got full fairings wheel to wheel aluminum 5th wheel full gauge package and thermoking tri pack

[@anthonyrobertson1787]

I used to Detail Freightlinner Nice video 👍

[@AndyTheKenworthGuy]

Thanks for watching

[@samiam197437]

That is a awesome truck, only missing navigation system

[@AndyTheKenworthGuy]

They have their own they install after.

[@xnihilo1044]

Beautiful truck, but is it even worth it to be an owner/operator today?

[@AndyTheKenworthGuy]

Absolutely

[@stephenroberts4895]

The audio got out of sequence for some reason in this video. You might want to take a look at that.

[@AndyTheKenworthGuy]

When did you notice it?

[@rdowell10]

Around 9:25 when you were pointing things out under the hood it seems a little off.

[@stephenroberts4895]

@@AndyTheKenworthGuy From around 9:25 to 11:29, when pointing things out under the hood, the voice part was out of synch with what you were pointing at.

[@carfreak0029]

andy, do you know how i can purchase the window curtains for a t800? some of my coworkers have them, but i dont and i would like them to keep the light out. message or reply.

[@AndyTheKenworthGuy]

Talk to a parts department at a kenworth dealer.

[@carfreak0029]

@@AndyTheKenworthGuy Thanks!

[@jasondickson6030]

Did this model replace the old ant eaters?

[@AndyTheKenworthGuy]

Yup

[@MotoTruckerTV]

I think you can still get a T660, which replaced the t600 - The T680 has a wider cab than the t660

[@lastone1759]

Would like to have that back wall storage in the 76inch stand up instead of a top bunk. Where can I get that hat? Lol

[@AndyTheKenworthGuy]

I wish it was an option.

[@jesuscalderon6650]

I want a truck just like that how do I contact you I’m in midland west Texas

[@Arsham-K]

Can you give some info about fog lights ?

[@AndyTheKenworthGuy]

Sure. Stay tuned in future video

[@mardela5430]

My dream..... Thank you bro..

[@bradadams8217]

The Australian T610 looks better, and why do you still use am CB radios? We use UHF now you wouldn't find a bulky old CB in a truck these days.

[@AndyTheKenworthGuy]

We have both. The factory only supplies the CB and we have customers install their UHF radio

[@dougmccomber]

Andy what is the interior height in the area between the cabinets?

[@AndyTheKenworthGuy]

I did a video a while back that goes over this.

[@mshotyk]

So what's the cost of this truck as its outfitted

[@fundsfordad]

NICE BUGGY !!!

[@AndyTheKenworthGuy]

Sure is.

[@gerardogonzalezrodriguez228]

best regards from Costa Rica

[@AndyTheKenworthGuy]

Thanks for watching

[@henrygiovanni161]

WELL !!... I'm still waiting to see the poor driver's bed, it looks like, will have to sleep half/seated backwards in the Pass. seat, Local configuration??

[@AndyTheKenworthGuy]

Single operator trucks.

[@sj1690]

Can we get this God of a truck in new Zealand?

[@bobanaavramovic7301]

KENWORTH 680HP.👍🚛🇺🇸

[@niceguygesnone1]

Do they even make the k100 anymore

[@AndyTheKenworthGuy]

Nope

[@juliovasquez2365]

Me gusta ese kenwort cual es el precio?

[@CountryManGames]

love the new Intro

[@AndyTheKenworthGuy]

Thanks!!

[@futurenow522]

GREAT REVIEW!!

[@AndyTheKenworthGuy]

Thanks

[@mauroburitica8100]

Hi from Colombia

[@AndyTheKenworthGuy]

Hello!!!

[@JesusSanchez-cp9ut]

What bumper is that? Part#?

[@AndyTheKenworthGuy]

Call any Kenworth parts department.

[@rodneybruntz6424]

Remember when a Kenworth was a cool truck? Now it's a over glorified Freightliner hecko in Mexico's

[@AndyTheKenworthGuy]

Still is cool.

[@herbklemm9089]

Could do without the plastic mirrors on the hood. Doesn't look good...or design them to match the door mirrors.

[@nunyabusiness5275]

I HATE that stupid radar system. AND the stupid automatic. Shifts at the worst times

[@bigooleskool4566]

Where can I get that KW Took??

[@AndyTheKenworthGuy]

Shopkenworth.com

[@aeronshameljr7019]

When u order ah KEN ,do u guys do like Peter bilt Steve air ride front suspension and dress up like they do with ah PETE! They got that new dig, dash 🤔

[@AndyTheKenworthGuy]

Yup. But nicer.

[@2vgod460]

Man why do people go with the paccar engine......

[@AndyTheKenworthGuy]

Weight, fuel savings, cost, reliability, lots of good reasons

[@MistrZIGZAG]

Are you in Saskatoon?

[@AndyTheKenworthGuy]

Winnipeg

[@ИванГригорьев-м8я]

👍👍👍👍👍

[@kurtaxtell7559]

Love the shirt would like to get one!

[@AndyTheKenworthGuy]

Shopkenworth.com

[@kurtaxtell7559]

Thank you!

[@p1kkujuha]

Nice!

[@brightkim7558]

와...멋지네요

[@renerobert4639]

Try to sell them my Pete and I'll buy your Kenworth

[@AndyTheKenworthGuy]

Good idea.

[@niceguygesnone1]

Taking all the fun out of trucking no gear shifting clutch, lol give me a mack b lol the new kids would not know how to drive it , But its nice i will give you that

[@AndyTheKenworthGuy]

I’ll tell You the 60 year old driver I trained on this truck is sure excited to drive it.

[@onionrings8896]

Under frame exhaust is a piss poor idea, you will be choking on diesel exhaust when idling in the winter and so will the guys parked next to you at the truck stop. I dont even know how this was given approval by the DOT. This is a very dangerous design flaw, even the sleeper heater exhaust exits inches from the sleeper.

[@AndyTheKenworthGuy]

Exhaust is clean and the trucks don’t idle because of factory heater and ac unit

[@chrisleon6238]

Nice. 👍. 👍. 👌

[@AndyTheKenworthGuy]

Yup

[@MES0506]

nice hat

[@AndyTheKenworthGuy]

Why thank you!

[@MES0506]

@@AndyTheKenworthGuy Just because of the Canadian flag, the collors, the pom pom on top and the Kenworth logo

[@graymikep64]

There sweet

[@PolevoyKamchatka41]

👍

[@MartyStamour-kf3hv]

Back windows

[@cathy9160]

Truckers need to design trucks they know best they drive and spend long hours in them.plastic plastic plastic there made with a lot of ugly plastic

[@AndyTheKenworthGuy]

What material should it be? Wood? Steel?

[@dsotojc4645]

Cathy use your head.... and think🤔. Lighter is better... Metal or too heavy of an object can crunch or kill you. I could go on and on but do your research.

[@DLSWV]

👍😉

[@elijoesu6261]

Que pasa con: freighliner, international, Volvo, peterbilt, mack, WESTER... Que tienen de malo esas marcas porque solo alabar a kenworth... Estas marcas tienen trucks muy bonitos.. Cascadia, volvo vnl. Pro star. Lonestar,.....

[@AndyTheKenworthGuy]

English?

[@elijoesu6261]

@@AndyTheKenworthGuy ok

[@shaun7126]

A baker Mayfield

[@howardbreidenbach4677]

The visor

[@AndyTheKenworthGuy]

Winner winner.

[@howardbreidenbach4677]

@@AndyTheKenworthGuy I am definitely getting that option on my next 680

[@ArturZagaj-Izraelita]

Jeździłbym, ale nie w Szabat 🤗🥑🍇

[@warriorblue63]

Need to FULLY delete and PDI tune that at the factory, they do NOT breathe

[@Skankhunt-kp6xq]

Chrome bumper, mirrors, visor.. black hood mirrors. Yuck

[@larryspicer3701]

I am kenworth fan.. But I feel sorry for whoever buys these new trucks.. What a maintenance disaster.. Electronics emmisions and computer control transmissions.... No Thank's.. What they dont tell you is the cost to maintain this rolling disaster... I take an old A model any day over that so called technology..

[@billunderwood8975]

Is the new transmission ruined by fuel-efficiency dominated software like the Eaton model? Eaton makes a great transmission and PACCAR makes a great engine and the emission control systems are noteworthy ... but some engineering C.L.O.W.N. decided that mileage bragging rights are worth destroying the performance, the reputation, and the customer base of all three... Educated beyond their intelligence quotient and too busy patting each other on the back and fkng each others wives at dinner parties to worry about the person actually living in the vehicle they so haphazardly designed

[@AndyTheKenworthGuy]

The automatics are catching up to the automotive transmissions. The manuals are great for the experienced operator and the autos are also good for the old driver who has a bad shoulder or leg for clutching and shifting. The products are great.

[@The06correa]

muito bom

[@charlesferebee263]

No Davco fuel filter. Just Saying. 👎

[@ingodwetrustdellaware-inc8322]

I've been so obsessed with Kenworth, that I named my son after. My Ex wife wait for the 1st fight after my son born, about 3 months later and have changed my son name w/o telling me. Just knew 6 months after, once my son get sick and I have to take him to American Fork, UT Hospital. They couldn't find him on the system by the SSN. So they adviser me to go to the health dept and figure it out what going on. Surprisingly the bitch change my son name to Skylar..

[@robertlt2002]

Kw 👍 t 680 🎶🎵🇲🇽😎

[@AndyTheKenworthGuy]

Thanks for watching Robert.

[@christophercriss5888]

Went cheap on outside of truck and swivel seat and table should be standard ,,,,get rid of pac car engine there junk,,,,Cummins 565 is only way to go with 18 speed and 3:73 rears

[@billunderwood8975]

If the same genius designed the transmission fuel-efficiency software, this transmission won't work for you either. The software turns a dynamite tractor into an absolute turd ...

[@JoseHernandez-sl1co]

Yo quiero uno ☝️?

[@bobbyjackson2061]

I would not buy that truck with that engine !

[@AndyTheKenworthGuy]

Why? It’s fantastic

[@billunderwood8975]

2015-2019 T680 sucks... transmission is junk and the interior is cheaper than Freightliner

[@AndyTheKenworthGuy]

Wrong.

[@dsotojc4645]

Bill...., I think is time for you to check out!!!!!😆😆😆😆😁