HTVRont Auto Heat Press: How to Use and My Honest Review

[@boopy002-qu4et]

I have this press. Same color. I purchased it in March. I love it. I have sublimated and ironed lots of things. I have even sublimated a 6x sweatshirt. I just pushed the base in and held it and it closed. There is one thing that when it is new it will make a pop noise. That was kind of scary. I contacted HTVRONT and they said it would go away it was some kind of thing that just happens when it is new. I no longer have the popping noise. I had a 8 in 1 press before this one. I had it for about 3 years and had lots of problems with it heating in some areas. I had a few craft shows and made so many things with the HTVRONT press including, coasters, shirts, sweatshirts, mousepads, car tags, pop sockets, cardstock for cards, and so many other things. I have never had any problems. I always use my large tefflon sheet so that nothing small gets stuck to the lid. I also love the slide out feature. I love my new HTVRONT auto press. May not be for everyone but it's for me. Love your videos Angie. Your the best!!!

[@AngieHolden]

Good to know! Thanks!

[@MrsDracoMalfoy13]

Hi! Can I ask you how you went about heating a sweatshirt? I just tried my hoodie and it was extremely difficult to get it to close and parts of the design didn’t come off.

[@glindawest5413]

A HUGE pro that no one ever mentions is that the outside of the device DOES NOT get HOT. I had another press that scared me because the outside of it was extremely hot. This is a lot safer for people with children or cats. They will only be harmed if they put their fingers (or paws) inside the press.

[@judyromano2229]

I bought mine before it came out. I love it. For any limitations it might have, there are work arounds, rather its how to do a hoodie or the pressure. I do HTV, DTV, DTF, Sublimation, all of them are great. I have used my swing away since I got this one. Love the auto feature and quick heat up time

[@AngieHolden]

It definitely stayed cool on the outside!

[@ninjahtasi9936]

​@judyromano2229 I've been searching for a good printer for clothes printing for my work. Hopefully this is it.

[@darlenekrisak2962]

I really wanted a Cricut Auto Press … but I could not fit it in my budget or my craft space … this press is an awesome alternative for a small crafting space and a limited budget. I love it!

[@veniselindo6272]

The plate on this is bigger than the cricut if I’m not mistaken.

[@AngieHolden]

Definitely a good option!

[@veniselindo6272]

@@AngieHolden which press do you prefer overall? This one or the cricut?

[@anthonygrimaldi9483]

Getting this press when it came out was the best thing I ever did!

[@jeannegaston9085]

I have found work around for some of the cons. When doing polo shirts I simply place a Cricut heat mat inside the shirt. It makes it pretty thick so I use a large Teflon sheet over it and hold it down on each side as I push the tray in. I’ve probably done 300+ shirts since getting this press. My only wish is to have the carriage come out a little farther. Saying that, I have never burned myself.

[@AngieHolden]

Yep definitely work arounds but I still see that as a con that you have to come up with those things.

[@kimashelly]

I love it, I purchased mine on pre-sale last year. I have the swing away and found that more scary with that heat plate swinging to the side of me. I also have several other means to heat set my projects if any of the issues listed became an issue for me. I’ve done the heavy hoodies with HTV and like you showed here, I just turned it sideways. I highly recommend this press

[@AngieHolden]

Thanks for the feedback! I also am not a swing away fan! HA!

[@aussierednecksinger28]

Hello, how long have you had yours overall? I'm wondering if the pressure is still excellent over time?

[@CraftwithAnn525]

HTVRONT is a ball of sunshine empowering people to make amazing things. I'm always surprised at all the cool things people make. 💥♥

[@SafariSis]

Very well done evaluation! I just bought the HTVRont and tried it for the first time today. Your video is a big help in understanding the press and how to use it! Thanks, Angie!

[@AngieHolden]

Glad I could help!

[@jenn5817]

Great video explanation thanks for your help! I was curious on purcashing this and helped make a decision

[@AngieHolden]

I’m happy you found this helpful!

[@miracles1234]

I love mine. I have a rheumatoid condition and this press allowed me to make 50 Christmas stockings without any problems or any pain 😉 I like it better than the cricut auto press because the surface is bigger at 15x15 and obviously it's way cheaper. I have not had problems with the clearance so far

[@AngieHolden]

Awesome!

[@arleneaugustahair8393]

This is definitely the comment I needed to see for the exact same reason.

[@elephantlover2023]

Exactly why I got

[@ChronicallyJessie]

Why I purchased as well

[@samesta5695]

I can’t wait to use mine. It came today. I have a huge one in my garage but I never seem to get out there to use it.

[@AngieHolden]

Hope you like it!

[@janlabbate3277]

I love mine as well, I agree that the platen is a con. I had a swing away but needed something that wouldn’t hit the wall to get a clear platen. It works for me. Thanks for your videos, they help me make decisions.

[@AngieHolden]

Thanks for watching!

[@kimberlyf6379]

I love mine. I’ve done up to XL size hoodies, a thicker zipper jacket with a Sherpa lining, tshirts, metal bottle opener, and the ceramic Cricut coasters and other things all with no problems.

[@AngieHolden]

Awesome!

[@keeshap9268]

Which direction do you place the hoodie when pressing? Very on edge of purchasing after seeing so many negative Amazon reviews 😭

[@Myownorlando]

What Transfer company do you use? or do you have your own printer? :)

[@barbiej923]

Love mine! Needed one that fit my space with a shelf above. It works perfectly for the sublimation I have used it for so far. I don’t do bulky items plus the Cricut press is just too much money for me.

[@AngieHolden]

Oh I like the idea of a shelf!

[@CarefreeSpirit]

I have a silicone pad and a pressing pillow. When I need more pressure, I lay those on top of the mat that comes with it and it increases the pressure allowing me to do things that call for heavy pressure.

[@AngieHolden]

Good to know!

[@beatrizdelarosa5579]

Hey, Where did you get yours?

[@kyraeves6024]

I was wondering about this! We also do DTf and have heard the htvront isnt the best. So i wonder if trying a different pad if itll work better!

[@joseykeep]

A major pro is the overall size. Those with limited space have this as an option. The fact the Cricut Autopress opens wide is great, but it requires more real estate space to use. I LOVE my HTVRont.

[@AngieHolden]

Definitely true!

[@joseykeep]

@@AngieHolden I would love the Cricut Autopress for the space from it opening, but I unfortunately do not have the real estate space.

[@rebeccaengebretson964]

Thank you. Great review. I’m looking to buy a heat press and really on the fence with which one to purchase.

[@AngieHolden]

Glad I could help

[@lorrainefox6774]

I bought this on Amazon about a year ago and I absolutely love it.

[@AngieHolden]

Yay!

[@rachaelrisk6466]

What items can you press with this please.

[@Spookymamaa]

@@rachaelrisk6466basically anything!

[@JFroh66]

I just received my HTVRont yesterday. I LOVE IT!! I had an old used clamshell that was not heating right (probably ever since I got it 2nd hand) and I did burn myself on it. It was probably twice as heavy as the HTVRont auto press as well. I do think I might purchase another clamshell in the future but I can see this HTVRont taking me a long way before the "need" for a clamshell arises.

[@AngieHolden]

Definitely!

[@CraftwithAnn525]

This is amazing I watched 4 videos before this one, and you covered more than them combined.

[@NailsbyAmbie]

I love mine. It’s not that heavy heats up quickly and especially love the auto feature. $200 compared to 1k for Cricuit press.

[@gabzounette31]

Hi Angie, thanks a lot for this video it's really well done! I just sublimated my first tote bag and while the image is all there, the upper corner is blurry. Would you have any idea what I am doing wrong? Thanks a lot! Gabrielle ☀️

[@AngieHolden]

My guess is the seam of your tote bag was interfering with the transfer. I would try to lift up the middle or hang the seam out of the press.

[@rossimorey2340]

This only my second time running into you here so; yes, SUBSCRIBED. 🎉 Thanks for everything!

[@AngieHolden]

Awesome!

[@cindyko1765]

I LOVE my HTVRONT Press. It’s all the average crafter needs. The fact that it’s a third of the Cricut brand was a game changer for me. I was on the initial backer distribution list for this and have no regrets at all. You can buy a different mat that is firmer for sublimating ornaments for more even pressure. ❤❤❤

[@AngieHolden]

Good to know about the mat!

[@Blondie7676]

You are right it’s probably good for the average crafter. But with the amount of different substrates this is useless.

[@thecarltonfam5680]

Hello! What mat?

[@joelle524]

Hello @cindyko1765 which mat and would it help with screen print needing heavy pressure ????

[@hydrosential]

I just purchased mines I can’t wait super excited!!!🎉

[@AngieHolden]

Hope you enjoy it!

[@bonniewhillock3536]

I got mine a year ago pre sale and LOVE it! I added the silicone pad for better pressure on some things.

[@AngieHolden]

Replacing the pad for some items is a great idea!

[@MrsDracoMalfoy13]

Adding a pad increased the pressure? Or decreased the pressure? I think I need more pressure for my hoodies but not sure how

[@lynnsomerville9636]

I the timing is perfect I just ordered this based on other reviews but was hoping you’d do a review 😊Can you please show how to do slate in this too 🙏

[@AngieHolden]

I will not be using this for slate. SORRY! I just don't get great results from an autopress on slate.

[@lynnsomerville9636]

@@AngieHolden ah ok . Thanks for letting me know.

[@TheCreativeDork5]

How do you do slate then?​@AngieHolden

[@christylovecrafts]

The machine's color is so beautiful! Love it!

[@AngieHolden]

I think so too!

[@jackieshelley4337]

Can I chose an embroidery sublimation for this machine?

[@AngieHolden]

This will work for sublimation. Not sure what you want to do with embroidery?

[@icebearhikes]

Thank you for the HONEST review! It is very much appreciated!

[@AngieHolden]

Always!

[@Underground_Vibes]

What's the thickness of the gap you can press.. I have wooden MDF blocks that I would like to press imagines on and the space doesn't look big enough

[@AngieHolden]

I would say maybe an inch? I haven't measured.

[@jcarson7574]

Went to the link you have for this and it also shows baseball caps besides tee shirts? I know they have a hat press but can this be used for caps too? Thanks from a newbie.

[@AngieHolden]

This is only for flat objects. Sorry! Not sure where you are seeing caps!

[@EyeOnTexas]

The htvront is my first and only heat press and I love the ease of use but can see the cons you mentioned. Do you have a video (or know of one) that addresses using software like Canva with purchased sub designs? My question (problem) goes beyond what I am seeing in sub videos and I don't know where to find help!

[@AngieHolden]

Try this: kzbin.info/www/bejne/oZfQq6WCo8ians0

[@vickybunn7117]

I just purchased this machine and will be using it mostly for sewing projects like interfacing on fabric. I've only done one project so far but really like it for this application. However, when I turn the machine off the power button continues to blink. It is not hot so I assume it is turned off but should the power button continue to blink?

[@AngieHolden]

I actually unplug my heat presses when not in use so I am not sure!

[@razvangeana6245]

Hi.Wich one is better?Manual or automatic one?I don’t know what to buy.Thank you.

[@AngieHolden]

Gosh depends on what features you want! I would watch the video on both and decide which looks better or easier to use to you!

[@vickeyjackson7367]

Hey, i absolutely love this video. Quick question. I am limited in my space inside my apartment & I’m a newbie with all this. I hvnt purchased my circuit yet. But just want your opinion. What do you recommend me to start out with. Being that I’m a newbie, and would like to start out doing shirts as gifts & for myself and also in case someone ask me to make them a shirt. A fbf recommended easy press 2. What is your thoughts… ty

[@AngieHolden]

I would do an EasyPress for just making gifts and a few shirts. No need for a larger press.

[@vickeyjackson7367]

Ty so much for responding back. Does it matter what circuit I purchase or are they all pretty much the same

[@cmontoya1122]

Angie, I find that when I turn off my HTVRont from the on/off switch button, the switch button keeps blinking. Does it always do that?

[@AngieHolden]

I have heard other people say this! I always unplug mine so I am actually not sure!

[@chfman4912]

Take the pad out for a slightly larger object. You don’t need the pad or use a thinner pad. For added pressure slide a heat pad pillow under the existing pad. That’s what I did and it creates additional pressure.

[@AngieHolden]

Still not a huge fan!

[@MrsDracoMalfoy13]

May I ask who can pad pillow/silicone pad did you use to get extra pressure?

[@Emily_enjoy_crafting]

Thanks for the precise review! It really helps a lot! And the machine seems really great!

[@JACQUIEGILSON]

I really appreciate this advice. I just bought one of these and I haven't heard the fan go on or a beep when it reaches the set temperature? Do you think that it could be defective?

[@AngieHolden]

Hmmmm. Maybe?

[@DUCKSJO]

Thank you for your video - i purchased one and appreciate the tutorial.

[@AngieHolden]

Happy to help!

[@MaiasHomeBusiness]

I love the open close feature because I have rheumatoid arthiritis and my shoulders hurts so this makes it a lot easier for me. Can you please tell me what temperature did you use on the notebook?

[@AngieHolden]

Always use the time and temperature recommended for the specific blank you are using.

[@LynchJodie]

Is there any way to turn off the auto turn off feature if it sits for a bit?

[@AngieHolden]

I don't think so.

[@SoVeryJo]

I wanted one of these forever and I finally got one. But now I have buyers remorse and want to return it. lol I haven't even opened it. I have a clam shell one now and I don't think I like that fact that I can't open it. I'm waiting to hear back from these folks.

[@AngieHolden]

If you purchased from Amazon, you can often do a return through them. Good luck!

[@teamjesus2407]

I do journals all the time. I lay the whole journal flat and they sublimate beautifully.

[@topazl9593]

do you prep the journals first for sublimation?

[@patsyr3919]

what kind of journals? what are the cover made of? Thanks!

[@brendamassey2007]

Hello Angie, I just got my heat press today, I don’t have a Cricket, I just need to know how & what I can do too get things so I can press on shirts, sweatshirts ? I have a laptop & printer but I don’t understand how to get things to press on the shirts! Can you tell me is there a website that I need to go upon to print off and use to press on to the shirts? This is all new for me, & really looking to make shirts for our Church ⛪️ also I noticed a clear plastic over your transfer do I need to use that and if so do I get it from a craft store ? Thank you , Brenda

[@AngieHolden]

You could use this material and cut with scissors instead of a Cricut: kzbin.info/www/bejne/aIXYineIZdd1bZY

[@CassondraWeverka]

How does this work with easysubli for cotton or dark shirts for sublimation. I used a circit press with dark shirt and easysubli and it had like a engraved area and also when i took the paper off there was some parts that were dark on the paper like the ink didnt come off

[@AngieHolden]

Polyester fabric or any fabrics really can leave lines when you press. Regardless of the press you use. This press should work for EasySubli however.

[@sanyadsouza5650]

Thanks Angie for this video! As usual you're the best!

[@AngieHolden]

You're so welcome!

[@lecter28]

Do you know the correct temp and time settings for dtf and vinyl printing?

[@AngieHolden]

It depends on what you are pressing. Always check with their instructions.

[@pamwhelan7737]

Hi Angie thanks for the above information. I am looking at the above machine, yes because of the price, to do tshirts for residents in aged care. I have bought transfers from Temu to use and want to know if this machine will do the trick. I have done a couple of tshirts with just the iron so far, and they appear to have worked, haven't washed them yet though. Thanks for your thoughts in advance.

[@AngieHolden]

This should work for those.

[@xparte]

Would this be fine for using white toner prints?

[@AngieHolden]

I would NOT use this for white toner prints. You need something that can apply heavy pressure.

[@xparte]

​@@AngieHolden Thank you!

[@LisaJohnson-gz5es]

Just bought this and I am excited to try it! Your link for the sub notebook isn't going anywhere. Do you have a link for another one?

[@AngieHolden]

The company I used went out of business and we will work on adding those links!

[@johnsonr8573]

Can you use the to sublimate also or is it just for htv prints?

[@AngieHolden]

I used it for sublimation in this video.

[@suspow1267]

What about doing sublimation items how good is it for them please

[@AngieHolden]

I found it works well for most. For heavier pressure things you may get mixed results or have to play around with how to make it work.

[@2RachelTalley]

What temperature did you do the shirts on?Im new to this and wanted to start pressing shirts only.Thank you!

[@AngieHolden]

Generally I do shirts at 385 degrees for 55 seconds.

[@2RachelTalley]

Thank you!

[@michelefrost734]

I love mine, tho I don't make shirts / sweatshirts. I have neck and back problems and I would never be able to open a regular press multiple times a day. The auto open feature is mandatory for me now too. I make a lot of smaller, solid items for sale (especially coasters, car coasters, and magnets). I've figured out a) use a nomex pad on top of the regular pad, and b) use cardstock shims to get extra pressure - I tried the Artesprix firm foam pad under the regular pad and it was too much pressure. A handful of heavyweight sheets of cardstock was just right.

[@AngieHolden]

Great info!

[@julieanncrookston1582]

Thanks for the video. Question. Can it be used WITHOUT the pad?

[@AngieHolden]

I don't think I would do it without something in there. I have heard of people putting something firm in there instead.

[@julieanncrookston1582]

@@AngieHolden Thank you. So do you think the Artesprix mat would work? I'm wanting to do wind spinners and wonder if the softer mat will be to soft for them.

[@AngieHolden]

I think that would work!

[@mostafa_abbas]

Thanks for the review I just want to ask if the HTV good for business or not?

[@AngieHolden]

Try this video: kzbin.infog3PfqTjr-SE

[@richdillon4035]

I have pressded several things... and now I get the E2 error. I unplug it, way a while, and plug it back in. That USED to work. Now I do it and set it to one of the temp modes... it jumps to 410˚ and 15 seconds. What is that all about? I'm in the middle of a run. I'm screwed.

[@AngieHolden]

I have not had that error. Maybe try contacting them.

[@donnierearden8334]

I already have a nice Trans Pro Plus 16X20 with the interchangeable platens … I’m interested in this press to do Sublimation & cure my DTF prints … I’m currently using my 16X20 press to cure my DTF prints & constantly having to adjust it to hover for DTF curing… I just hate spending the money on a DTF oven if I can cure DTF prints & press Sublimation projects with this heat press … What are your thoughts ?

[@AngieHolden]

I do not recommend curing DTF on a heat press due to safety concerns. I only recommend and oven with proper filtration.

[@lynnkaufman9006]

I bought this on to replace a different one...I cannot afford the cricut press and I love this one...I have used this one on many occasions and love it. The price can be beat and love the color options. It's amazing how they can put the cricut auto press on sale, I think they cost way too much and htvront also has other presses at a much better price than the cricut presses.

[@AngieHolden]

It is definitely a great option!

[@josephinebaich8341]

I just purchased my auto press and the start button keeps on flashing when I’m done pressing. I cannot get it to turn off. It only turns off if I unplug it. And suggestions would be greatly appreciated. Thanks!

[@AngieHolden]

I haven't noticed mine doing that but I always unplug my heat presses when I am not using.

[@josephinebaich8341]

Thank you! I did get in touch with HTVront and they said that was normal. They suggested that if the flashing light bothered me, to just unplug it!! 🤣

[@pattishelton3169]

I am waiting on my Cricut Auto press and I’m pretty sure I’m going to like it better than this one. I had reservations but, I think I made the right choice. Thank you for this tutorial.

[@AngieHolden]

Have fun!

[@christophercolletti1756]

Hi. I just bought one of these presses, I want to try to use it with White Toner Transfers for dark garments with my OKI8432 White toner printer. I have seen this press work with many different types of transfers, HTV Vinyl, sublimation, and DTF (Digital Transfer to Film) transfers, so I figure the press is versatile enough for White Toner Transfers which are very similar to DTF transfers. White Toner Transfers for Dark garments require a two step process - first, print the design onto a clear film, then press a sheet of glue to the clear film at 320 degrees for 120 seconds at medium pressure (marrying the two sheets so to speak), then press the married sheets onto the garment at 320 degrees for 30 seconds using medium to heavy pressure. I am failing on this second step with the HTVRont press because I can't get heavy pressure. Help me understand how the pressure works on this machine so I can jerry-rig it to use more pressure for the second step of my process. If I were to add a teflon pillow underneath my shirt, causing there to be less clearance between the top of the platen and substrate, does that create more pressure?

[@AngieHolden]

I find that adding thickness does NOT in fact increase the pressure at least to any amount that makes a difference. I am pretty sure it has a pressure sensor and once it reaches a certain pressure it just holds it.

[@chitariv62]

How would you clean the top plate? Thank you..

[@AngieHolden]

That is going to be TOUGH on this press! Maybe thread a cloth through that is long enough to hold on both sides?

[@chitariv62]

Thank you. Just curious. I am all of a sudden having issues with lines on my butcher paper which leaves them on my laminate when pressing. I've tried with and without extra pads for more and less pressure. I cant attach an image to show you. @@AngieHolden

[@christylovecrafts]

Thanks for the review! Really love the machine! It works really great!

[@AngieHolden]

Great to hear!

[@MonroesArtStudio]

How does the shirt look after wash?

[@AngieHolden]

It worked fine!

[@teemarie757]

I just got my HTVRont and I do not know to cut it off. The power button just blinks. I have pressed it and nothing. Can you help me please?

[@AngieHolden]

I actually just unplug mine as I never leave it plugged in! Maybe try pressing and holding the power button.

[@robertadejean3081]

It is supposed to stay blinking for its plugged in

[@delynnegomez5778]

Have you tried doing coasters or white boards with those auto press?

[@AngieHolden]

I don't think I have done either of those.

[@delynnegomez5778]

@@AngieHolden okay thank you! I’ve read reviews that there is not enough pressure for to do coasters with that autopress. I wanted your feedback!

[@ambergreen9614]

Hi @delynnegomez - you can definitely do coasters- and they turn out beautifully! I have had this press since it first came out and have spent a lot of time experimenting with different substrates/times/temps etc. This press is amazing and I think that most crafters who have bought it and really spent the time to get to know it would say the same. I have been making coasters, t-shirts, metal plaques, slate pictures, thick wooden plaques, mousemats, keyrings, hoodies, and little patches for sewing on to jeans etc. I experimented until I got it right. I made it all for a winter artists craft fair. I have had no issues with lack of space when threading hoodies or t-shirts over the platen at all, or issues with pressure. And this machine IS substantial…I find it quite heavy to lift so it stays in the one place. I also have other brands of heat presses…I have a Magic Touch clamshell press, a Cricut Easy Press 2, Cricut Mini, Cricut mug press and the HTVront tumbler and mug press. I love all of them…but my out and out favourite is this HTVront auto press. If you do buy one then I would suggest that you spend time experimenting with it and all it can do - personally I don’t think you will be sorry. Apologies for this long reply but I hope it helps you👍

[@chiantiedwards6041]

Thank you this video helped me a lot!

[@AngieHolden]

You’re welcome! I’m glad you found it helpful!

[@HildaLoraLorasgraphics]

I got mine today as Christmas present and m hubby said is for sublimation ...I have no idea what is that lol do you have any video about?

[@AngieHolden]

Sure try this: kzbin.info/www/bejne/gorNYamJbtGCntU

[@kelliedawn4745]

Hey Angie (my daughters name) :). I am trying to figure a way to put sublimation on light plate covers. Any pointers??

[@AngieHolden]

They can be tough due to the rounded edges. I tend to use a rubber pad over the top to get as much heat as possible on those curves. However, I am not the best at them at least yet!

[@kelliedawn4745]

@@AngieHolden do you think the lamination sheet would hurt it? I have a plastic and metal plate.

[@AngieHolden]

Oh I have ONLY used ones that are meant for sublimation. I haven't used regular ones with laminate.

[@kelliedawn4745]

@@AngieHolden I have looked on Amazon and can not seem to find them . Is there a way to send me a link please. ??

[@RajKotecha]

Thank you for making this video😊

[@AngieHolden]

My pleasure 😊

[@lauraporter7993]

Does it work good for making slates?

[@AngieHolden]

I don't like it for slate.

[@lauraporter7993]

Which press do you think is best for doing slates?

[@AHA500]

Heard about adding another pad so it can trick the machine to add more pressure.

[@AngieHolden]

I am not a fan of that method but some people have success.

[@tammygoldbach930]

What can be used to clean it?

[@AngieHolden]

They make a heat press cleaner.

[@JoAnnKing-ub8ds]

Does it work on rhinestons

[@AngieHolden]

It should but I have not tried it.

[@briannaf3325]

Just are the other heat presses you use?

[@AngieHolden]

I have a Cricut AutoPress, Siser Heat Press, and many hand held presses at the moment. I have had others in the past to review/use but I tend to only keep a few due to space.

[@basegod6467]

Hello do you know if this machine is good for shorts and sweat pants ??

[@AngieHolden]

It would work for those!

[@lashundarice5869]

I have had this press for a year. I love this press but not for puff. Not enough pressure

[@ScottyTooHotty2023]

Which auto press do you prefer, HTVRont or the Cricut auto press?

[@AngieHolden]

Cricut AutoPress by far.

[@privateuploads5397]

Im worried that you didnt put teflon on in there. I have this product and its truly an amazing investment. The sad thing tho is HTVRONT dont have A3 size yet.

[@SheriTownsend-f5l]

Can you tell me how to shut it off. It didnt shut off automatically like the manual says

[@AngieHolden]

You can press the power button again or unplug. I keep all of my heat presses unplugged when not in use.

[@SheriTownsend-f5l]

@@AngieHolden I pressed the power button- won’t shut off. So I just unplugged.

[@jennifermillet7999]

My press don’t have the fan sound nor it’s not heating on my sublimations pictures on

[@AngieHolden]

If it is not heating up you may contact them.

[@joelle524]

I just got mine. But now I worry it won’t work on Screen prints I ordered. It says heavy presser. Anyone tried it with Screen prints? Any work around????

[@AngieHolden]

I have done screen prints on my Cricut AutoPress and it works fine.

[@realaxingmeditation9244]

Hi Angie, I have a huge question. I have a ET 2800 printer for sublimation and i can not get it to print the exact dimension that i set it to. Please help. If any one has any feedback. Its driving me nuts.😂😂

[@AngieHolden]

I answered this on another video where you commented!

[@kimberlywebb2257]

I Absolutely LOVE Mine!!

[@AngieHolden]

YAY!

[@Sykes4lyfe]

This was very helpful!

[@AngieHolden]

Glad it was helpful!

[@OmarYaujar]

For small places this is perfect

[@barbra429]

Can someone PLEASE tell me why the switch (on) light keeps blinking non-stop, is this some type of malfunction?

[@AngieHolden]

Hmmmm....doesn't sound right as I have not noticed mine blinking. Does it seem to work okay?

[@barbra429]

@@AngieHolden I've had a few people say it blinks because it's still plugged in.

[@markferraz5389]

It won’t turn off unless you unplug it SO WEIRD !!! Def a turn off on the product

[@barbra429]

@@AngieHolden I returned it. Thanks.

[@kathyclark468]

Great Video!

[@AngieHolden]

Thanks!

[@rgvtexas8391]

I love mine too and where there is a will there is a way..

[@waiting_4_jesus928]

After I turn my press off the power button blinks, I wonder if everyone else stay blinking?

[@AngieHolden]

I unplug my heat presses when not in use so I have no clue!

[@bayernj2317]

Has anyone had any issues with the garment moving when sliding under the press? that's my only concern with this.

[@AngieHolden]

This is the reason I do not like it! I can't see what is happening!

[@wriggleystretch]

I love my purchase, but to be honest every heat press has its pro's and cons the User defined button is a positive and the auto saves on energy for me. The shutdown if not in use after 10 minutes is a big positive. If I have anything to large for the gap I will use the swing away, especially substrates that require more pressure that this machine gives, a small price to pay for a beautiful addition to my sublimation.

[@AngieHolden]

Definitely!

[@jennifermurphy8014]

So will it work with DTF transfers or not enough pressure?

[@AngieHolden]

I am testing some DTF now and it looks good so far!

[@jennifermurphy8014]

@@AngieHoldenI wonder if they will hold up well

[@MrGotchacp]

How do you turn it off?

[@AngieHolden]

I unplug all of my heat presses when not in use.

[@bethkalina6754]

Does anyone find the limitation of 99 seconds a problem? There are many things for subbing that are longer times.

[@AngieHolden]

I would say that is another con for me at least.

[@mokpixcreativephotoboothvi4725]

Weird, mine goes to 140secs maybe more but I'm going to see how high tomorrow

[@jacalynmatroni3558]

Love mine. For extra pressure I add a boars under my item. I take off pad.

[@AngieHolden]

I just find it doesn't work as well as I would like.

[@sharonduncan-robinson933]

I just received mine and it worked - just made one shirt but no fan sound whatsoever. Anyone else not hearing any fan. Just concerned machine won’t last/work if fan isn’t working.

[@AngieHolden]

Hmmm..not sure on that!