Anki Vector Body TEMPERATURE FIX | No More OverHeating Issues With Vector Robot | 4K

  Рет қаралды 2,354

TAKEAPART

TAKEAPART

Күн бұрын

Пікірлер: 17
@KungFuMojo
@KungFuMojo 4 жыл бұрын
Dang it, didn't know one day I would have to perform surgery on Vector. I did not have these issues before, only after DDL took over. Would firmware have an effect on these things? Is it possible that DDL is causing this?
@takeapart
@takeapart 4 жыл бұрын
hi, did you payed subscription? FW can change things for sure
@KungFuMojo
@KungFuMojo 4 жыл бұрын
@@takeapart I was a kickstarter backer. I think I'm on their latest firmware. Do you know if it's possible to roll back to anki firmware?
@takeapart
@takeapart 4 жыл бұрын
it is possible but you may have to contact them and ask ... out there isn’t much about it...
@lokikvalnes9531
@lokikvalnes9531 5 ай бұрын
What kind of thermal tape did you use?
@CodingCozmo
@CodingCozmo 4 жыл бұрын
Thanks for documenting that. I wonder how it would compare to one without the holes drilled in it. Perhaps you could lower the temp enough by just adding the spacer between the battery and circuit board to provide an air gap. 🤔
@takeapart
@takeapart 4 жыл бұрын
hi, yes you can leave it close but it will be pretty much airtight ... with excessive use of vector... play/charging and repeat the temp can rise way up! thanks for watching
@apitjee5350
@apitjee5350 4 жыл бұрын
What spacer did you use? Is it insulating sheet?
@takeapart
@takeapart 4 жыл бұрын
hi, oh sorry it is originaly sticked on vectors battery... I just cut it half and sticked one on top of another.
@apitjee5350
@apitjee5350 4 жыл бұрын
@@takeapart Oh I see. Great video buddy. I like it. Just continue whatever you do on Vector.
@takeapart
@takeapart 4 жыл бұрын
thanks for watching
@HaplessOne
@HaplessOne 4 жыл бұрын
Does vector overheat often? I just bought one with intention of vector constantly running but now I'm nervous that it might damage it if I do that. I would just do what you did and might still do it but I dont know how confident I would be doing something like that without breaking vector.
@takeapart
@takeapart 4 жыл бұрын
hi, yes need to test... let him run and see if he will get hot you will notice as high temp warning will appear on his display. thanks for watching
@HaplessOne
@HaplessOne 4 жыл бұрын
@@takeapart thank you for the reply. Will do.
@takeapart
@takeapart 4 жыл бұрын
enjoy your Vector Robot!
@TheAmazingRaptor
@TheAmazingRaptor 4 жыл бұрын
I have had him running constantly sense January 3rd 2020 and have never. EVER had this problem
@takeapart
@takeapart 4 жыл бұрын
hi, it depends on batch and also room temperature...
Building a Massive LEGO Tank
17:56
Brick Technology
Рет қаралды 414 М.
Робот Anki Cozmo, замена батарейки, замена аккумулятора, АКБ.
9:32
СТО Автопрофи г. Гатчина
Рет қаралды 431
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
I Tested Instruments from the FUTURE
15:15
Landen Purifoy
Рет қаралды 227 М.
Stunning Product Photography with Just ONE Prop | Minimal Setup BTS
9:42
Phantom 4 Pro Range Issue Solved | AUTO Problem 2.4 or 5.8 Ghz
8:50
SkyPixels Video & Photo Productions
Рет қаралды 48 М.
All you need to know,vector robot
1:04
Gamer_345 🖥️
Рет қаралды 366
Quansheng UV-K6 -HF Full Band Mod v2.5 LNA+PreAmp+ Dual Antenna
10:55
VU3ZAG Expedition
Рет қаралды 9 М.
DEAD Game Boy DMG - Can I Restore it?
19:40
Bricoda
Рет қаралды 35
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН