Annoyed That Your Office Chair Keeps Sinking? 3 Easy Fixes

Cylinder Replacement Kit: links.theofficeoasis.com/amaz...
In this video, Kevin shows the three options to fix your sinking office chair. He shows the duct tape & hose clamp method, the PVC spacer method, and replacing an office chair cylinder entirely. Each method is broken down step-by-step so you can fix your office chair that won't stay up.
The link in this video is a paid link for our company The Office Oasis
Timestamps:
0:00 - Intro
0:15 - 3 Ways to Fix Your Sinking Chair Overview
1:02 - Hose Clamp Method
2:41 - PVC Spacer Method
5:04 - Replace Chair Cylinder Entirely
Here is a link to the full blog post, in case you'd rather read than watch. theofficeoasis.com/blogs/guid...
If you need additional help with your cylinder replacement or ever need anything at all, we're here for you. Simply reach out to us at [e-mail]

[@JohnnySilverballs]

As im watching this im slowly sinking thank you sir

[@ItCantRainAllTheTime1988]

Lmao me too so sick of it😂

[@Elle_M717]

Too funny! 😂😂😂

[@winterfrost2990]

Loool hahahahahahhaa

[@ryanruotsala6410]

🤣🤣🤣🤣🤣

[@myfaaammilly1607]

Lol

[@mgsjr]

That PVC pipe trick was ACEEEEEE. I just need to spray paint it black and we're good to go. Shout out to you bro!

[@donnagambrell1412]

And I was just about to purchase a new office chair!! I thank you kindly; 🙏🏽

[@tomb8524]

Thank you for sharing the video. Yesterday my wife advised her office chair was sinking. I googled up the problem and found your video that enabled me to do a quick fix using the PVC pipe method. The fix is entirely satisfactory. Thanks again. We live in Australia.

[@theofficeoasis]

Amazing! Thanks for the kind words!

[@coopercav]

I like the PVC pipe method, as I have been unable to remove the cylinder, plus saved $49, cheers dude!

[@daver6291]

PVC fix works like a charm! Thanks!

[@Khryptic]

Legend! I was lucky enough to one piece of random PVC pipe in my garage the exact length of the distance of the space that was sinking. Almost like it was destined for the chair. Works brilliantly. Many Thanks from the UK

[@theofficeoasis]

Nice! Love it when it works out perfectly like that!

[@jakebullard8311]

Kudos to you for showing the cheap fixes as well as your own product. I just ordered it!

[@ecsocet]

No more sinking in my chair every time I sit down, all thanks to this video and a 6 inch piece of PVC tubing left over from fixing the sink. Thank you!!!

[@Its_Jordan]

Thanks for these fixes, the PVC one worked. Didn't have to measure it, it was already cut at the size my chair was, I got sick of buying new chairs I don't want to buy a whole new chair for $150 to $200. The chair I'm using sinks a fair bit, so I tried the PVC and testing it by lowering it, and it won't go down which is a good sign never thought a pipe would help and prevent chair sinks. All people said would work was Hose Clamp, but thanks for the help.

[@crugil]

Duct tape, hose clamp...easy peasy..works beautifully.Not ugly at all as it's not visible to anyone..many thanks!😄

[@JenWheelerFL]

I just spend an hour going out and getting a hose clamp, coming back and "fixing this", sat in the chair and was excited it worked and then heard a pop and sank down. LOL Now I'm sad because the replacement cylinder is on backorder and won't arrive for about a month. So sad, but such a good idea!

[@crugil]

@@JenWheelerFL sorry Jen . But I sort of had same problem.. I bought a second hose clamp and placed it under the first..I moved the first one up as far as possible and the second underneath it . Fixed.. Now at times if I sit too hard it'll sink down a bit; maybe a 1/16"of an inch.. But it's been fine since.. You have to place the clamps close enough so there's hardly any space for the seat to sink.. Try it, if it works you can cancel the new cylinder..

[@TheSydguy30]

@@crugil Good idea using two!

[@geoversegames]

I can't believe how easy these steps are & to even show alternative is also a treat! Excellent work on creating this awesome guide, Kevin! Well done! 👌😁

[@theofficeoasis]

Thanks a lot 😊

[@crugil]

I've just started noticing how my chair sinks..but I"m all for the easy fixes..and I don't see why the hose clamp/duct tape can't last a long time..I'll try that ..thanks, good stuff.

[@davezambrano6115]

been suffering with this chair for months, bought the kit he recommended and fixed it like new!!! thanks!!!

[@anitablanco7309]

Thanks for the ideas you shared! I fixed my office chair and it worked! It doesn't sink anymore!

[@thesillyinme]

This is a very neat and thorough guide! The temporary fixes can be helpful for some who are still looking/waiting for a compatible cylinder replacement for their chair. But overall, I’d love a permanent fix and your tutorial and tips in replacing the cylinder entirely makes me confident that I can do it with my chair if I have to. Excellent work!

[@theofficeoasis]

I'm glad you liked it! Thank you for the kind words!

[@somestupidwithaflaregun3788]

Your #2 PVC Pipe fix is the bomb! Thanks!!! I'd tried your #1 hose clamp before - that started slipping after a day. Your#3 confirmed my expectation that changing out a cylinder would be strenuous and require a lot of heavy hammer blows (but why bother going through all that effort to install a new cylinder that will also just likely fail within two years?) I'd studied other solutions like those clip-on plastic spacers available online, but just knew those couldn't hold, and a lot of commenters confirmed that. I imagined a solid PVC or other pipe would be the only way to reliably hold up the chair, but it didn't seem possible, so I was elated when you showed how easy it is to separate the wheel base by that little clip, then slide over a solid PVC pipe. So I measured carefully, and calculated the diameter using good old high school geometry, since I don't have one of those tools that would measure that. A 5 inch length of PVC pipe with a 1 1/2 inch interior diameter was a perfect fit. I wound black plastic electrical tape around the pipe and now it blends right in completely camouflaged. It was all so easy and quick! Sure, the chair is stuck at this height, but that's fine by me. It's my damn chair!

[@hardtymz2517]

No hammer blows needed. Buy a wood clamp that also switches to a spreader. Two spreaders opposite each other and poof! It blows right off. Just a few slight squeezes of your hand. You could probably use the exercise.

[@Kakurison]

Utilized the Hose Clamp Method -- works like a charm! Thanks The Office Oasis!

[@theofficeoasis]

Awesome! Glad it worked!

[@coolreem]

You are by far one of the best instructional guide experts I have seen on KZbin. Thank you for making this so clear and simple.

[@tatsumasa6332]

bar none.

[@AVEXentSUCKS]

I think I like the 2nd option the best because I don't mind being stuck on a certain height. Replacing the cylinder is good but it will eventually start losing it's ability to hold the air again and will break.

[@TheSydguy30]

I replaced mine with an OEM and it lasted all of two months before the problem returned.... I'm going to do this PVC method.

[@tsnisanth]

correct, i had the same thought.

[@kerridelorme6605]

I spent $20 on the chair from facebook marketplace so first two methods win! Thanks!

[@theofficeoasis]

Amazing!

[@user-pq7jj3vs3e]

I just want to thank you for this public service

[@BuzzHubllc]

I used the PVC method. It worked like a charm for only like $5 total. Great info. Thanks!

[@brentib]

OMG! This was Brilliant! I was about to buy a new chair. Simple, easy instructions. Thank You!

[@marcrgarcia]

Thank you, Sir, just fixed my office chair using your video!

[@R08Tam]

I used the second (poor man's solution) with the plastic pipe. It works a treat. Thanks for posting

[@sallyalbright9329]

Great video. Even a non-handy senior like me was able to fix my chair using duct tape and hose clamp. I’ve ordered the kit for a more permanent solution- fingers crossed I can do it.

[@theofficeoasis]

Awesome! Glad it helped!

[@lucasstewart64]

I know this has been up for a minute but for method 2 I found a way to use a crap ton of papers instead of PVC. I just measured what i needed, cut that length and rolled them all up into a cylinder, taped them with duct-tape, and slid it right in and BAM. The only thing I have ever used Algebra 4 for a real world scenario.

[@hardtymz2517]

Most people throw away good but unneeded computer chairs so the cylinder can easily be replaced for free if you grab it before the trashman does! Tried and true and easiest/cheapest method, just not guaranteed you’ll find one EVERY trash night.

[@vincentbriggs1780]

Thank you, this was very helpful! I tried the second method using a bit of very dense half inch thick cardboard tube I had on hand, and it worked great! Finally my elbows are at the same height as my work table.

[@taherajna]

Method #2 worked like a charm. Thank you for this!

[@KenneXS]

Very professional so clean clear & efficient! Thank you

[@Xstrain]

Thanks, I cut down on old paint roller as my pvc tube and cut it down to size using a bread knife. Works like a charm!. I really need to build up my tools ;)

[@briancmagill]

Dude. Love the channel. This really helped me save probably about $200 or more on a new chair. Not to mention I found this channel because I just bought two of your large monitor stands (1 brown, 1 black) from Amazon and opted for your brand because of the good reviews and quality of materials. I found a great channel to subscribe to in the process and get to support an American company. I hope you do more DIY videos in the future and perhaps show off your products you make in the future and maybe even give a glimpse into your manufacturing process.

[@theofficeoasis]

Thanks for the kind words Brian! Glad the video was able to help you save some money! We definitely hope to create more videos and even show behind the scenes stuff.

[@jacquigittens816]

Thank you! I needed a longer allen wrench than the one that came with the kit I bought. I had to have my husband help a bit but your instructions were spot on and my chair is better than when it was given to me by the person that probably knew the shaft was not in perfect working order.

[@michaeltamburello]

Thanks so kindly for your informative instructions and link to the solution. You rock, man!

[@meridiem]

Clear, concise and exactly what I needed. Thank you!

[@Maxaldojo]

Hey TOO! Great video! I like the step-by-step breakdown for each possible solution. I prefer the PVC pipe, as the duct tape and hose clamp might eventually slip and I've had NEW chairs do this and replacing the cylinder may not actually resolve the problem. Thanks for the video!

[@theofficeoasis]

Yep! The PCV pipe method is a great option and a cheap fix!

[@zacklittle1185]

Loved your format on the video. Thanks for not making us sit through the whole video to get the info. Great Video!

[@christopherbailey2209]

I just did option 3 with the kit - very straight forward just like the video. Make sure to wear the gloves that come in the kit! Thank you!

[@itsWakaru]

Thank you so much. I have a hydraulic ordered for my chair, but as a temporary fix until it gets here.... the duct tape and clamp is working wonders. Thank you so much. Its even holding as a bigger fella.

[@ninastar5833]

excellent presentation and step by step guide -thank you.

[@user-qr3ek6ps4m]

This was super helpful! The Oasis Replacement Kit was definitely the way to go. Super appreciate it!

[@theofficeoasis]

Thank you so much! Glad it was able to work for you!

[@techsavvyhero]

Super helpful! Thanks for the tips

[@user-dh1gg5ro2j]

Works a treat ! Thanks.

[@Oughnutsdndaizzap]

Thank you I’m forever grateful for this video

[@anniechang2808]

Thank you so much. I found PVC tubing for office chairs in black. Perfect! Saved a ton of money & I can keep my worn in loveable office chair.

[@JAiRUh0326]

good to see this information available

[@markoldendorf5393]

Did the spacer by cutting a piece of pipe to 5". took, in total, around a half hour for a permeant fix. thanks. The spacer has reduced the smoothness of swivel a bit, since you are riding on the collar. .

[@oblong3039]

Great video, was looking at buying brand new chair. This has saved me some money, will just buy new cylinder.

[@ramonar]

Great video, thank you!

[@s.m.maranta9671]

Thanks for posting really appreciated it. The PVC works great.

[@user-nt4io4pi2w]

This is a brilliant tutorial on fixing the chair. I was literally about to throw it out and replace, but the pic piping method works a treat. Thanks for making this video..!

[@theofficeoasis]

Glad this worked for you!

[@Marquezzzimo]

Awesome vid! Thanks for sharing

[@flowhq.global]

Excellent video, Thanks.

[@thaimuayshoo1171]

Rocking the socks but the thoroughness for the fix demonstrations are great 👍

[@KyleRebstock]

saved me a bunch of money thanks!!!

[@darrenc2721]

Thanks for that, My chair was like this when I purchased it, I was really annoyed and wasnt able to use it till I saw your guide. The clip method works perfectly. I purchased the right chair for my height/size, but I just couldnt send it back. I had to return my bike as they sent the wrong wheels too, so it was just a bad day all round. I dont know how long the clip will last, but Its a huge difference. Thanks.

[@74p]

Thank you for the tips. I did method two with the pipe except ... turning the chair upside down, I realized that it was suddenly working again. All I did was turn the chair around, removing the base and then ...I could not compress the cylinder. I sat on the chair to use my weight but it was stuck. So for now, my chair is fixed, simply by turning it around. This might not last long, of course, and if that is the case then I WILL revert to the pipe (which I have now already cut). By the way, speaking of pipe, I had both 32mm and 50mm (inside diameter) pipe. I decided to use the 50mm which fits exactly over the base (2 inch ID will probably also do). my pipe is then almost 220mm long (8 inches or so), as it covers the entire length, including the part sticking up from the wheel base.

[@Romanticvampyre6]

The second method worked for me! Thank you. 💯 I used several hose clamps at the bottom, however, it still a temporary solution.

[@theofficeoasis]

You're welcome!

[@EStellaMaris-s9n]

My chair has been annoyingly sinking and I was looking for an easy fix method. So glad I stumbled on this video. I will definitely try out the easy fixes. Thanks for this video.

[@theofficeoasis]

You are so welcome!

[@DebPana]

Thank you for posting this video! For a mere $2.83 (spacer method) I was able to cheaply and quickly solve by sinking chair issue!

[@shal9s]

nice and helpful! Thank you😊

[@thomasmeriam2423]

Excellent video. Thank you so much.

[@theofficeoasis]

You're welcome! Thanks for watching

[@arthas1774]

great video, gives option for not taking anything apart, only taking the bottom off, and full replacement.

[@Elle_M717]

The PCV pipe method seems like permanent solution to me. I'm going to try it!

[@azmosam4572]

The legendary office chair repairman

[@samuelajunwa7642]

How, this is wonderful, thanks

[@mosesmaina7243]

Very helpful

[@zogrush]

Thank you so much for putting everything at the start!

[@theofficeoasis]

You're very welcome! Glad it was helpful!

[@ashirbashir2907]

Very Good and helpful video. Thanks

[@theofficeoasis]

Thank you!

[@lindseyhughes4758]

You are brilliant. Thank you

[@mindiescott6697]

Thanks so much. I did the PVC fix and it was so easy.

[@theofficeoasis]

Glad to hear it!

[@mozhdehshahmoradi9828]

Great solutions. Thanks a lot ❤️

[@theofficeoasis]

You are very welcome! Thank you for the kind words

[@robjayar8684]

Thanks for the ideas. I choose #1 because that's the only thing available atm.

[@edwardhuang2475]

Excellent advise and can save a lot of headache ....:)

[@junaidtanoli1]

This pipe solution was perfect for me. I used ppr 40mm pipe.

[@oreandsconcepts2004]

THANKS

[@edwinawood9214]

Thank you for amazing instructions

[@theofficeoasis]

You are very welcome!

[@joienegru]

Thanks. It took me a while to also find out that skinny metal thing moves up and down to make space for a bigger pipe piece.

[@ralphedelbach]

At 4:08, instead of slipping a piece of large diameter plastic pipe over outer column, place a small diameter piece of pipe over the small piston rod of the lift cylinder after removing the washer and bearing. The piece of pipe will go inside of the base and prevent the chair from sinking however the height of the chair will now be fixed in place.

[@caseyeisenman]

I always tape and clamp my office chairs! works every time.

[@Jackiecarlet]

THANK YOU

[@brucemorgan9758]

Thanks, really appreciate it .... I Love the PVC option .. LOL just set it and forget it

[@eilyntomassini]

❤ thank you so much

[@annesummers09]

Again, Thank You for this too! 😁

[@theofficeoasis]

You are very welcome! Happy I could help!

[@VIRTRUALPIXELZ]

genus mate!!!!!!

[@ellaeadig263]

Oh my god thank you. I literally have injured my leg using that half squat bobbing up and down motion constantly trying to put my chair back up.

[@MsYvette2828]

Worked like a charm. I am soooo proud of myself. I got tired of seating down and sinking to the middle of the Earth. LOL. I used the PVC pipe method except I used a old carboard pipe that I had laying around the house. I cut it to size it a tiny saw. A lot safer and easier to cut than a PVC pipe. Thank you sooooo much. I am sitting high..high. Now I am ergonomically correct.

[@theofficeoasis]

So happy to hear that!

[@hardtymz2517]

PVC cuts easier and cleaner with only one hand with a “ratcheting pvc cutter”. Like $8 at a cheap tool store.

[@fem_aya]

tried the PVC Pipe, works well so far! although hard to do with normal knives... highly recommend some kind of saw, even cheap ones. im still baffled that my "premium" dxracer formula had the sinking happen RIGHT AFTER a month of warrenty, it's crazy.

[@tim46387]

The PVC seemed like an easy fix. you could always prime and paint the PVC with a flat black spray enamel before installing it. Give it a day to dry first. It would be less uglified. just a thought. Great video. Thanks

[@akashshrestha01]

Great

[@Starr-xt7dm]

#1. THANK YOU!!!!!!😊

[@gellal1]

Thanks for the big help! What I did was.. split the pipe in 2 (cause theres no pvc pipe that fits the chair rod) then use the pipe clamp to tie it back together

[@theofficeoasis]

Super smart!

[@ProductCreationFormula]

For today I have put on a hose clamp. I work at a hardware store buying so a pipe is my next option.

[@ComdrStew]

Remove the metal clip on the bottom and take the cylinder out and spray the rod with WD40. You actually want to do this around every 6 months. Don't know why this works but it's been working on every chair I have fixed for this problem for 35 years. Was thinking about using synthetic lithium grease next time.

[@johnk5208]

It was so satisfying to reach your channel subscribers to 400 )))

[@theofficeoasis]

Thanks so much John for your support!!

[@Greazer]

Number one every day

[@ericsperling9724]

PVC Method worked like a charm. I had a lot of trouble removing the clip on the bottom of the cylinder so could you explain how to do that without breaking it (like I did)?

[@theofficeoasis]

@ericsperling9724 glad the PVC method worked for you! That retainer clip can be frustrating to remove sometimes. If the chair is really old the clip might be brittle and break/snap when trying to slide it off. You just have to take that part slow and be very careful not to bend the clip too much. The chair should still work fine without that clip. But if you really wanted to, you could purchase a new chair cylinder. Hope that helps!

[@lanak5578]

Hi. Can you help me please. My chair not sinking. It’s rising. And I have no idea what to do. Or if you know who can fix in Miami Florida even better. Thank you