👨🏻‍🔧Another Day at the Junkard: 4L60E REMOVAL (2023 CALIFORNIA SUMMER IN FULL EFFECT🥵☀️)

WANT TO SUPPORT JUNKMAN A?
👇🏽👇🏽👇🏽
💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY!
📬📬📬 📬📬📬📬📬
📬P.O. BOX 9249
📬FRESNO, CA. 93791
📬📬📬📬📬📬📬📬
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@garycallahan7867]

Good job getting it out of that mangled mess!

[@Ajunkman]

That thing was not trying to come home!! lol Thanks bro 🦾👨🏻‍🔧💯

[@s10_randy67]

Can you do a video of how much you get the transmission for ??

[@ericjenkins2816]

Are you at Pick N Pull?

[@Ajunkman]

Yes sir!

[@colemanharvey1664]

How u no if it a bad transmission

[@KD0LRG]

Fluid if dark and burnt it got hot. If there is a crap ton of metal stuck to magnets it might be screwed. Clutch material in the bottom of the pan is a good way to tell how worn the clutches are. Besides that you are rolling to dice unless it was in a accident and you can at least say it drove that far.

[@daleshelden8394]

I know bad grammer when I see it!

[@colemanharvey1664]

Appreciate it

[@Ajunkman]

I think I have a video fully explaining that. 👇🏽 m.kzbin.info/www/bejne/aaLVlX2iZthjZ6s