4L60E REMOVAL IN 6MINS!?👨🏻‍🔧

WANT TO SUPPORT JUNKMAN A?
👇🏽👇🏽👇🏽
💥🥩 www.A1JERKY.COM 🥩💥
BUY MY GOURMET BEEF JERKY!
Junkman A FAN MAIL:
📬📬📬 📬📬📬📬📬
📬P.O. BOX 9249
📬FRESNO, CA. 93791
📬📬📬📬📬📬📬📬
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@garycallahan7867]

You’re on fire today. No mangled mess to deal with.

[@Ajunkman]

Thanks bro I appreciate you stopping by I have a lot more videos I need upload

[@Morethanhauling21]

Could you do one with a transfer case 4x2 z71 video please

[@Ajunkman]

I should have several of them up

[@BigFun4Life]

You don’t mess around lol…

[@Ajunkman]

Haha I try bro thank you 🙏🏽👨🏻‍🔧 Been trying to get it under 5 mins Super hard lol

[@ryanredrock7894]

Just wondering what you do with all these 4l60s after taken them out? Learned alot watching for sure

[@Ajunkman]

Sell em, rebuild em, use them for parts etc Been junkN for 13-14years or so lol I appreciate you stopping by 👨🏻‍🔧👨🏻‍🔧🙏🏽🙏🏽💯💯💯

[@Morethanhauling21]

I have an 02 z71 I need the exact tools to pull my transmission out if you don’t mind it’ll be my first time and does it matter that it’s a 4x2 and not 4x4

[@Ajunkman]

The list of tools is in the description of every video!!

[@Datascope002]

Quick question have you had issues with the speedometer after swapping a 4l60e? I recently swapped one on a 97 suburban 2wd and the speed just seems to be reading faster than the actual speed

[@Ajunkman]

It’s more than likely your speed sensor or speed sensor harness

[@georgesaffold8431]

Did they work

[@Ajunkman]

Always!

[@grifonks]

If you don't man up you will break your hand..... or head? hard to hear

[@Ajunkman]

Hahahaha sounds harsh but I’ve seen it happen with my own eyes 🥴🥴🥴🥴😩😩😩😩🤧🤧🤧

[@v8ryderzautoclub113]

Shit where you from

[@Ajunkman]

Good Ol California

[@v8ryderzautoclub113]

@@Ajunkmanwish you was In Philadelphia