👨🏻‍🔧Another Day at the Junkayrd: A STUBBORN 4L60E REMOVAL

••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
*Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!*
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@daviddzedzy9194]

good job and👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍up

[@Ajunkman]

My man!!!👨🏻‍🔧🙏🏽👨🏻‍🔧🔧🦾

[@danielwhisnant1587]

I would love to have one of those frame supports! Never seen one on the East Coast.

[@Ajunkman]

Thanks for stopping by bro! They’re nice when they’re set correctly but sometimes they’re set right on the subframe bolts making it impossible to remove the transmission definitely feels way safer though compared to welded rims 🫠😬

[@danielwhisnant1587]

@@Ajunkman I would rather have to pull out a wrench for those bolts than shake a tranny on a truck balanced on cheap rims. Keep up the great videos.

[@grifonks]

I'll buy some of your mango habanero jerky bro, I already tried but the website says sold out- back soon. Back in the day we hunted Canadian geese killing a few hundred a year. I would slice the half frozen breast thin, marinate the slices in Tiger sauce and dehydrate.

[@Ajunkman]

Aww man, thanks bro you made my day- I should have some ready to go before the end of the month or early may I appreciate the support very much🙏🏽🙏🏽🥲🥹🥲 oooo Canadian geese! that sounds good I’ve never had that!

[@grifonks]

@@Ajunkman When I made a 10 pound batch of goose jerky my dogs, pointers and retrievers, went nuts. They knew that they would get a share. Wild goose is really greasy and gamey, but it makes prime jerky, the breasts are huge, bigger than most grocers store top round roasts.

[@garycallahan7867]

You were working in a dust bowl. I bet you would have rather been hearing the music than their conversation too!

[@Ajunkman]

Haha a dust bowl for sure! You’re right about that brotha lol 🎧