🌟 Another Stellar Review for the Worksport AL3 Pro Tonneau Cover! 🌟 (Link in Description)

[@tobiash1541]

That's the cleanest looking bed cover!!!

[@WorksportLtd]

Thank you! We're glad you think so! The Worksport AL3 Pro is designed not only for durability but also for a sleek appearance. Enjoy the clean look and the functionality it adds to your truck bed!" 🛻💨

[@idontcaresapo8233]

@@WorksportLtdwhat’s the durability

[@glenwa824]

Bought and received in six days. Easy install, perfect fit, looks awesome.

[@WorksportLtd]

@@glenwa824 great to hear! Be sure to send us some pictures and videos of your cover in action! We’d also love to get a video testimonial!

[@barkingspider2973]

I bought it! Should be here Saturday, looking forward to throwing it on my black 2023 tundra

[@WorksportLtd]

How has it been?? We would love to hear your thoughts and get some pictures!!

[@retiredperson4054]

OK -- I am about to start the install of the AL3 Pro on my 2012 Silverado -- What I am not clear on is --- Exactly where do you line up the 3M FOAM Seal Tape on the front bulkhead? Does it get laid onto the metal with an edge of the tape closest to the inside of the bed --- forward of the bed towards the back of the cab -- or down the center kinda splitting the difference of the width of the bulkhead surface? I sure could use your tip... (from this video -- it looks like you laid the 3M Foam so there is about a 1/4" edge reveal from the inside of the bed?) PS: on another point the instruction s I have say that the back latch brackets are mounted at 280/11" from the tailgate not the 7-3/4" you did here? Thanks in advance - Retired in KY (BTW -- Best video on the AL3 Pro install)

[@hieneken49]

Yea any updates on how this is holding up?

[@WorksportLtd]

Take a look at our Facebook, happy customers! Give us a try and you won't regret it, we are here to help!

[@billharris3335]

How water resistant is this cover? Also does it seem to be scratch resistant?

[@WorksportLtd]

Keeps water out, the most you should get are drips or drops from high pressure car washes!

[@josephpuchel6497]

Hey it looks nice but panels don’t have any support underneath except the one closest to tailgate which has the locking mechanism. Plus locking mechanism is about a foot back which allows it not to be snug at tailgate. These are my concerns.

[@WorksportLtd]

At the cab we have a two touch points to secure, at the tailgate the c-clamps can be adjusted to ensure that the cover sits snug with the tailgate so you cannot lift it up, you can also adjust the latch itself as well! Should be a snug fit all the way around! For specific questions, please email [e-mail] or call 888-554-8789

[@dani_cali4nia_7860]

I realize the recency of this post, but are still liking this cover?

[@WorksportLtd]

Take a look at our Facebook and Instagram, lots of happy customers!