How to Install Compustar Remote Start and Security Installation Demonstration | AnthonyJ350

This is a demonstration video how a Compustar Security and Remote Start system is installed by a professional.
This video just demonstrates how involved it is to install a remote and/or security system on a modern car. You should always have a professional complete these types of tasks, it's worth the money.
And as you can see, if done properly you'll have seamless operation and a very clean interior (as if there was no installation performed at all).
#RemoteStarter #Compustar #Wiring #Installer
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
How to Install Compustar Remote Start and Security Installation Demonstration | AnthonyJ350
• How to Install Compust...
ANTHONYJ350
/ anthonyj350

[@JuanPerez-yy5hr]

Nice install very professional that’s how they all should be done soldered tape plan and prep great stuff

[@AnthonyJ350]

Thank you! If you watch my more recent videos we have upped our standards

[@dieselrotor]

Just bought Ma the CS800-s one way for Her 2007 Dodge Grand Caravan and bought the ignition bypass(data link) module with it. I'm just a 32 year heavy truck mechanic but have installed dozens of "Bulldog" starter systems in both gas and diesel vehicles. As a few have suggested, do some research. I choose the CS800 and the security bi pass module because it did not need (exterior-on line) programming. Granted, when it arrived it looked a bit intimidating compared to other systems I have installed but once I figured out what "With data link" or "without" meant (Confusing instructions). It just became a basic install. Unlike some Nissan and Toyota's, Dodge does not require the CS800 "door lock/unlock" feature to be installed making it even easier because the factory remote will still unlock the doors after start up unlike some of the latter. I like it. I would recommend this system "BUT" if Your not really familiar with electrical install and not confident, this is not the system for DIY.

[@dennisguevara9427]

I have this exact Alarm system with pager. I had tech leave out the siren and car horn activates. Pager has 1,500 feet range. I recommend it. Compustar is good.

[@AnthonyJ350]

You should bring it to a reputable install shop in your area. They might have to reprogram the remotes or check all the ignition lines to make sure the unit is getting power. Did your battery die in your vehicle and did you get a jump or replace the battery of the car?

[@gnarmarmilla]

"basic install...." lol I am glad someone thinks so. May God bless you, brother...

[@AnthonyJ350]

It's a basic routine installation for someone that does the job every day.

[@AnthonyJ350]

Does it lock and unlock?

[@AnthonyJ350]

On avg, 150-300 labour. I've done over $1,000 labour alone easy, but that's with all the bells and whistles (i.e. Smart Start/ Drone, Proximity sensor, window roll up/ down and the list goes on). It all depends on what you want done.

[@factionfx]

Thank you for this video. I ordered it. Hopefully the bestbuy installer doesn't chop up my 2016 odyssey. I doubt most techs are as good as you.

[@AnthonyJ350]

They should be able to install it like this. The video was taken a while ago and my install technique has changed a little since then. I would ask to see some pictures of their work.

[@dbzownz12345]

Have one of these systems on my civic. They are loud AF & can be annoying if you work on them in your garage. If they go off by accident in a garage you're going to be hearing aids! Now, they'll def deter a crimainl breaking in cause you can easily hear the sound from a block & half away in the dead of night.

[@AnthonyJ350]

Thanks for sharing your experience!

[@Madcatter95]

Hey. I got one that looks just like what you installed and I'm pretty sure its running my battery down when the car sits for around two weeks. Is there a simple way to disconnect it so its not drawing power?

[@uaenrg]

Thanks in advance

[@AnthonyJ350]

Thanks for watching!

[@AnthonyJ350]

Yes you will. Also the install shop will need to find out if you have an 80 bit or 40 bit key, with the new firmware it shouldn't matter though. They'll also need to bypass the clutch switch only during the remote start sequence (usually done with a relay). So when you use the key to start you push the clutch in still, but when you remote start the vehicle it won't need to be depressed.

[@2vgod460]

Well there u go there these alarms do blow or melt car modules my ford guy just told me now gonna remove the whole drone package I have the brain and drone brain and get my installed to take it the duck out these alarms will screw your car up big time as I’m facing it now total com failures to ignition switch error and that’s just one code have4 just for the gem module. Also fucking with abs cause it connected to brake to fucking ruined my classic mustang

[@AnthonyJ350]

@@2vgod460 Sounds like it's improperly installed. I still install these once in a while on newer vehicles. Newer vehicles use integration harnesses which make it more plug and play. What kind of vehicle is it installed in? Can you email me pictures of the install? [e-mail]

[@AnthonyJ350]

@@2vgod460 Sounds like it wasn't grounded well. Is your Mustang fuel injected now?

[@2vgod460]

@@AnthonyJ350 yes it’s fuel injected the alarm works and all it’s just looks like it’s messed with all my electronics after my battery was off during winter now I have so many issues

[@2vgod460]

@@AnthonyJ350 it’s on a 2001 ford mustang gt. And the install looks like amateurs job everything’s black taped together a lot of the wires look like they going to my ccrm /bmc module. And ya there is a relay plugged in but not sure if it’s for clutch or something else I know one clip is disconnected on the clutch

[@trainingmusic11]

I would like to add a remote starter to my 08 corolla (manual trans) which is already equipped with OEM keyless entry. Do I need an immobilizer bypass for this install? Or anything else? Thanks in advance!

[@Tierone1337]

I was able to install the compustar pro t18 and the 9913 as myself and drone working at home .

[@AnthonyJ350]

Nice!

[@AnthonyJ350]

@sniperscrubb Thanks for the tip!

[@willsonbess1]

I have a NUSTART system in my car, the remote is working but the system is not responding when I try to start it I can hear it received the signal but still won't start can you tell me what's causing that problem and how can I troubleshoot it? Thx

[@AnthonyJ350]

Not really. Unless you put a switch on the main power lines. I've never seen anyone do that though. It shouldn't be drawing that much when sitting though. How old is the battery in the car and does it get a good amount of highway driving? I would suggest putting a trickle charger on it, if it's sitting for extended periods of time.

[@filiberto2980]

Hey Anthony J350 I've installed a few remote starters but not this brand. I'm installing one of these now and I can't find any info on them. I have visited a few web sites that came with this remote starter and they don't work or have any good information. Any ideas???

[@bezzle67]

this is exactly why I prefer using hood tilt switches

[@AnthonyJ350]

They're ok

[@MsCrazydriver]

do you know if its possible to install systems like that on older cars ? i have a vw polo 96 model

[@AnthonyJ350]

Oh for sure it is.

[@2vgod460]

I have a 2001 mustang with major electronic issues all data link. Errors I’m leaning towards the alarm that’s causing it what u think? Can the alarm mess with module communion after my car died it happened during winter

[@AnthonyJ350]

Possibly if installed incorrectly. Also a weak battery causes issues with low voltage situations.

[@tri5garage544]

I’m wanting to install remote start on my 98 Chevy c2500 without power locks or anything. What are my options? If I use this unit do I need the blade al? If I installed a universal keyless entry kit would it work with this?

[@AnthonyJ350]

Yes and yes

[@DoozyBytes]

It is recomended to get professionnal to install it... But if youre like me and youre a bit of a diyer..... Just buy the extra usb interface for the blade cartrige and program it yourself.... Easy stuff if you follow blades instructions

[@davidsimmons4091]

link to buy this?

[@elitusluxuer2336]

Where to buy the USB interface for the AL blade, if you may please?

[@sniperscrubb]

Yes, but tilt switches have problems when you park on a hill, garage slant,l or if it is not adjusted properly. There are problems with all kinds of sensors, you just have to choose your method of destruction.

[@KITTER298]

cool

[@AnthonyJ350]

Thanks for watching!

[@willdabeast144]

Found my car had this installed just dont have keys the number on back of the antenna is ANT-1WSH and its cm6200 same as yours what keys would I need?

[@AnthonyJ350]

Just need a fob and program it. Your local authorized Compustar dealer can help you.

[@TomAbramoff]

thanks for the video! what was the intro song?

[@justanotherguitarist6606]

Suga suga

[@domm.277]

When you lock and unlock the chirping sound from the vehicle. Can that be turned down? heard it can be turned off supposedly.

[@AnthonyJ350]

Yup, you can set it to a silent mode.

[@AnthonyJ350]

Older cars, such as yours are no problem to do.

[@HighPerformanceAlways]

Can I use compustar to change my car from regular key to "push to start"? Essentially go from having an old fashioned key to having a key fob

[@AnthonyJ350]

You need a different product to do that conversion.

[@nathanmarshall7523]

My compustar turns on headlights when remote start is on, is this an option? Because I now noticed that it turns my headlights on whenever the truck is running!

[@AnthonyJ350]

Is the parking brake on when you remote start?

[@LADYmoses]

do you need additional key for this audio starter?

[@AnthonyJ350]

Some vehicles you will for programming purposes.

[@_.ZEKI.TSX._]

Where does the siren connect to

[@AnthonyJ350]

Siren output wire. There will be a legend in the instruction manual telling you the colour.

[@willsonbess1]

no it does but I can hear a clicking noise under the dash board

[@domm.277]

Nice, how long did it take to install remote start and security? looking into it

[@AnthonyJ350]

Most customer's cars 4 to 8 hours depending on the vehicle. My car day and a half because I did some extra stuff.

[@domm.277]

hmm gotcha. hoping security and remote start is like 5hrs or less.

[@fandechavalones3022]

Do the newer compustar system sirens still sound like this one ?

[@AnthonyJ350]

They're a little different. Check out my recent Regal video, you can listen to it there

[@fandechavalones3022]

@@AnthonyJ350 what type of cumpustar brain comes with a siren that sounds like this one ?

[@antonioarcellana7243]

Hi Anthony, since the pro series t13 cant be purchased directly or ship out is there any chance we can pair RFX R5 to any other compustar model? for prox. unlock feature ? TIA Antonio

[@AnthonyJ350]

Some newer remote still work with older brains. I'm not sure specifically if the new antenna and cable will work for your setup. It's best to contact your local authorized Compustar dealer.

[@dpl1108121]

is this at bestbuy? jw

[@NastyKiller360]

So im looking to install a Compustar CS7900-AS All-in-One 2-Way Remote Start and Alarm Bundle w/ 3000 feet Range and after extensive research found out i need a remote starter controller module. Does any controller work or does it have to be compustar, also when i buy the Max it or start it by compustar will it come with the blade Al included?? what would i need to fully install a remote start and alarm system (want it to be as plug and play as possible) and will i be able to add a push to start in the future any and all help its wellcome thanks. (will be doing it to a 2019 silverado 1500 LD)(Old body style)

[@AnthonyJ350]

You'll want some type of digital remote starter, as your vehicle is heavily computer controlled. It will have everything you need. It's best to have the work performed at a credible experienced installation shop.

[@westsidesagittarius3103]

I'm confused is the blade Al really needed or is it just to make the install easier?

[@AnthonyJ350]

You'll need it for newer vehicles typically to integrate.

[@WolfParadisePlus]

Do you know if this is compatible with 2004 350z >>>> Compustar - 1-Button Remote Starter T-Harness Kit (2nd Gen) was gonna get it from best buy and have them install but wary of having them do it.

[@AnthonyJ350]

It should. Ask to talk to the installer, see if they're MECP Certified and ask years of experience. Also might want to ask for pictures of their wiring. Most Installers will have pictures of their work somewhere like Instagram.

[@cloudrhezii]

Do you think this kit with work in my 1996 mustang ? It has power locks and windows but didn’t come with keyless entry?

[@AnthonyJ350]

Yup for sure. Technician might have to wire locks with relays to give you keyless.

[@cloudrhezii]

@@AnthonyJ350 okay thank you ! There is a audio shop near buy that installs remote starts I’ll see if they can knock it out ! I’m personally liking the compustar cs7900as 2 way .

[@AnthonyJ350]

@@cloudrhezii Yes Compustar makes a fantastic product and it better suited for analog vehicles like yours.

[@kcbill502]

I had the same alarm installed... but the installer didn’t install the siren...just the horn to honk only. If I order a siren will it just plug in the module? If so I’ll just do it myself.....

[@AnthonyJ350]

You have to wire it to the siren output and turn on the security feature

[@kcbill502]

@@AnthonyJ350 Thanks for info....

[@317ivory]

How doesn't this video not get a billion dislikes? It sucks!

[@AnthonyJ350]

Thanks for the feedback!

[@davidconde1521]

would i be able to use my original vw mk4 siren instead? because I don't really like a aftermarket siren.

[@AnthonyJ350]

+David Conde DiBarsetti Do they have a separate siren or is it just the horn they use at a lower volume?

[@davidconde1521]

AnthonyJ350 well mine has 2 speakers ,on the front behind the grill and another one right below it on the same location ,so yes they would be seperated .. sorry i got bad english , i'm italian lol

[@AnthonyJ350]

David Conde DiBarsetti It's possible but you would have to measure the pulse durations and hopefully the aftermarket system can replicate it. You can also control the factory security in the driver's door I believe, that you would have to test again.

[@jerryruiz1245]

Does the alarm have a horn fuse, because my horn went out as my alarm was going off.

[@AnthonyJ350]

@SenorFusion12 Haha, thanks!

[@TheCanadianBubba]

Oh man... bought a truck, it has developed starting problems. really weird chit going on, started to get into it, found the shock sensor, thought it looked pretty cheezy ( thinking like that was the only component ) , did a search for Compustar and found this video... thats a fair amount of kaka to have to remove... Did not receive the remotes with purchase, thought that antenna was a factory piece... nice install tho... only bit that looked out of place or that caught the eye was the shock sensor, and now that i look at it i see that that's for ease of adjustment. Guess i'ma look for that brain and take it from there... figures... February... no shop...

[@TheCanadianBubba]

+TheCanadianBubba -That'd be all plug and play ( or tapped }, yes ? so unhooking everything from the brain would essentially be just the factory setup ? or are some circuits interrupted by the system ? Thanks in advance for your response : ]

[@AnthonyJ350]

+TheCanadianBubba Usually there are plugs to the unit, but the other end of the wires need to be spliced into the vehicle some how. Typically soldered. Why not just buy new remotes from an install shop and try to get it working, you said the install looks nice, might was well use it.

[@POPPASHANGO]

My only issue with all of these videos with the disclaimer as to you should have a professional install these is this... I have a 2007 Toyota FJ Cruiser...I was pricing out remote starters all over town. I went to the following places. 3 Canadian Tires, 2 JB Power Centres, Aero Auto Parts and 3 Toyota dealerships. All of which priced out the remote start with installation including the bypass. Just as I was about to choose the best priced unit with install, I asked what is the bypass for? I was told by each of these businesses that perform professional installations that I needed the bypass for my transponder key. I then asked, in order to save money could I just buy the equipment and install it myself. The Canadian Tires and Toyota said no, that they must do it. JB said that the units would need to be programed and they would not do it unless they installed it. The price ranged from $270 to $650. Through my online FJ group I found out that my FJ should not have transponder keys. I then called a brand new Toyota dealership that was glad to give me all the information in regards to my FJ based on the vin number. Without any doubt my FJ has just regular keys...no chips ...no transponders. I was being asked to pay anywhere from $85 to $125 more the by-pass. I called the Canadian Tires, 1 Toyota dealership, and Aero back to get a new quote and they all insisted that my car needed the bypass and would not change their quote. So.. as a result..I bought my own Compustar kit and will install it myself along with a programming unit for $150 and will install it myself. The alarming thing is this...how many people that did not do the research and found out if their car needed actually this equipment were ripped off. These companies install hundreds if not thousands of the units and they do not "know" if your car needs this equipment or not?!? This has got to be the biggest scam running. If you are planning on getting one of these installed by a professional, do your own research for your own vehicle first! Because I doubt that not one of these professionals would have said sorry we made a mistake and we are going to lower your quote...or give you a refund.

[@AnthonyJ350]

POPPASHANGO To answer your statement, we do work on a lot of vehicles (I work at Visions Electronics) and most vehicles of your year do have transponder keys. If you look at Idatalink's website, your vehicle is listed so I can see why you were quoted out you need one. I've done installs on FJ's and realized it didn't need it so I just refunded the customer back their money. Some times you won't know if it's a chipped key until you take the vehicle apart. Now I recommend you get a professional shop to do it because they'll probably do a better job (ask to see pictures of previous work) and they provide life time warranty on the workmanship and offer product support. So I wouldn't just go around calling it a scam when most databases say your vehicle has it. Because most vehicle post 2001 in Canada do have transponder keys. The questions I have for you is now if you're doing it yourself, 1)Does it work? 2)How long did it take you? 3)Does it do everything you want it to? 4) And how does the install look?

[@MisterWonderWizard]

Maybe going to a shop that specializes in installing these units might give you better service than tire dealers, auto parts stores and new car dealerships. Just a thought.....

[@BRado]

i purchased an 2012 tundra with a compustar remote start already on it. im looking to upgrade the remote. two questions: A - do i need to access the 'brain' B - where the hell is the brain generally located. i cant find it anywhere! i traced the antenna down twoards the driver side but lost it in the pillar (the replacement remote i bought comes with all kinds of wires, but it says i dont need them to program it if i have the correct module, just no clue where its at! any advice would be appreciated! long time fan!

[@AnthonyJ350]

If you can't find the brain, that means the installer did a really good job. It's best to bring the vehicle to an authorized Compustar dealer and have them program the unit.

[@BRado]

i thought i didnt need to access the brain in order to add one of these "remote upgrade" kits. do i? it did come with all sorts of wires. looks like a new antenna, but i have an old one. i see my local bestbuy is a compustar authorized installer. ive heard bad things about best buy, do you think they would be okay? i thought this was an easy upgrade

[@AnthonyJ350]

You can try just swapping the antenna and do the remote program procedure in the instructions. As long as the cable is the same you won't have to access the brain.

[@jamesjonah4821]

BrianVISION I do have two cars with same brain upgraded both of them to two communication I use same remote for both cars I put the remote in second vehicle mode put the brain into program mode. Turn the car on off five times but you don’t start it then Press lock button or unlock button

[@DRSKINGDAVID]

if you install as a 2 way data, why would you still need to use all those wires outside of the main harness?

[@AnthonyJ350]

You eliminate a lot of wires when you use data communication.

[@DRSKINGDAVID]

AnthonyJ350 thanks for the response, how do you know what wires are eliminated on a cm600-as when using a 2 way data connection from the idatalink? and is hard wiring straight from the brain to the bypass the better route seeing how all the functions may not work in data mode?

[@AnthonyJ350]

KING DAVID There's a legend in the diagram telling you the requirements.

[@DRSKINGDAVID]

AnthonyJ350. ok so if I was to plug in the data port, the only wires that will be used is the solid black wires, in conjunction with the solid data port wire right? because this is what I'm seeing.. it shows that 1 way data the broken black lines are not used, and in data 2 way it shows that the red lines are not used.. so say I'm doing data Two way I know I wouldn't use the red but what about the broken black lines that only show not to be used in data one way or does this apply for both data 2 way and 1 way? should I just be using the wires that show solid black, the same as the input for data?

[@boxing102711]

how much does an install usually run?

[@AnthonyJ350]

Around $600 with product and labour.

[@daduncker20D]

You actually don’t need an authorized dealer to program the blade. Just go to the idatalink website for the firmware.

[@AnthonyJ350]

Thanks for the feedback!

[@Tierone1337]

Yup I was able to install 9913AS with prot13 and drone myself at home. But the warranty is voidsd

[@user-tm3yj8gg6p]

The antenna looks ugly. Is there way to hide it or remove it

[@AnthonyJ350]

This is an older unit, antennas are smaller now. You can place it under the dash, but it will reduce the range.

[@uaenrg]

Hello brother.i have a compustar 8900as (cm900) concerning the cn3 18 pin wires. Which wire are essential for the system to work flawlessly ? I wanna install it in my 2001 model lexus ls430 with fob key ?

[@AnthonyJ350]

All the ignition wires and controlling the factory security system are essential. Does your vehicle have an immobilizer?

[@uaenrg]

@@AnthonyJ350 yes it does.

[@uaenrg]

The immobilizer is a security module that inhibits other than the assigned key when its entered in the key to start the engine? Right as my car came with the FOB ? Smart key

[@uaenrg]

@@AnthonyJ350 brother the cm900 has a cn3 connector(18 pin) .. what connector is important for the system to work properly ?

[@AnthonyJ350]

@@uaenrg Are you installing it on your own?

[@dennismartens8305]

There is a Page where u can get software and everything! Iam at some vacation and if iam back I can check for you! I install those 24/7

[@AnthonyJ350]

Thanks!

[@Fullrusher]

When installing just a remote started do you think an average guy like me could get the job done and if not what's the risk ? lol nice video btw

[@AnthonyJ350]

Fullrusher I don't recommend it. It took me years of practice to make it clean and reliable. The risk is damaging a BCM or the factory immobilizer.

[@MsCrazydriver]

thnks then the anly thing i have to do is just buy one

[@Oscar-lo4fh]

What can it be

[@AnthonyJ350]

You'll have to bring it to your local install shop to diagnose the issue. Too many variables to figure it out through here.

[@GTpinstripes]

Oh no... I would still avoid putting your antenna on the dot matrix since it's metallic. I mean, it's probably not enough interference to make to too much of a difference, but why risk it?

[@AnthonyJ350]

+GTpinstripes Been putting it on there for the past 9 years and no issues. I have never accurately measured maximim difference after, but no one has ever complained due to range. And we do our share of remote starters and security in Canada.

[@GTpinstripes]

Yeah, like I said, it's probably not enough interference to matter.... but either way, I enjoyed the vid. People really need to stop doing it themselves, and bring them to installers like us.

[@AnthonyJ350]

GTpinstripes I agree, I've seen a lot of shotty wiring jobs and then people wonder why their vehicle doesn't operate properly.

[@dieselrotor]

+GTpinstripes Yep, the instructions do also show the antenna being placed on the left, upper (drivers side) portion of the windshield away from the matrix. I'm going with the factory recommendations if for nothing more, the warranty.

[@platinumtr33z80]

You think I can install it into my 2003 mustang. I really like comustar and I don't wanna waist my time looking

[@AnthonyJ350]

Is the Mustang a manual and convertible?

[@platinumtr33z80]

@@AnthonyJ350 no

[@AnthonyJ350]

@@platinumtr33z80 Compustar will work perfectly fine with an Idatalink Blade AL.

[@420stonerz4]

@@AnthonyJ350 I have a 02 mustang convertible would this still work and what parts would I need to get

[@AnthonyJ350]

@@420stonerz4 Is it automatic or manual transmission?

[@TheStang7777]

any one can program those blades just go to there site or any of idatalink its simple.

[@georgeburns6512]

Thank you, Ik it’s 8 years ago, but I hate people that lie and say only a professional can do it

[@JsLaval]

when i see where you put the siren. that why is never gonna be a ''profesionnal' that gonna do it

[@AnthonyJ350]

You can hide the siren more if you pay more money. This is realistically where it goes for what people are willing to pay. Are your connections going to be as reliable and wired as clean compared to someone that does this for 8-10 hours every day?

[@olegbel5903]

As a @professiona@l, you should know, that antenna should not be installed in the matrix dots area, cause it deacreses the signal. so you are not, and this is why you are right-it should be installed by a professional)))))

[@AnthonyJ350]

Through experience it's negligible since people don't complain about range and I can easily get range from my truck a block away. If you want even more range, put Drone Mobile in. What shop do you work for?

[@Oscar-lo4fh]

Mine won't remote start sounds like it wants to but nothing

[@AnthonyJ350]

Too many variables. Could be the immobilizer or an ignition wire.

[@Oscar-lo4fh]

@@AnthonyJ350 it's for a 91 d21 nissan hardbody, the guy put it to the injector but nothing sound slide it wants to I hear the pump but that's it

[@AnthonyJ350]

@@Oscar-lo4fh Ya not sure what's wrong with the install. Was it done at a professional shop?

[@Oscar-lo4fh]

@@AnthonyJ350 the guy been doing install for 30 years hr had his shop before but idk

[@AnthonyJ350]

@@Oscar-lo4fh It should be no issue to bring the vehicle back and have it warrantied. There's no immobilizer from factory in that truck and it's pretty basic wiring for a factory vehicle.

[@sniperscrubb]

Bad place for your hood pin, you never put pinswitches in the rain channels, because water runs there, rust the pinswitches and causes problems, falsing down the line

[@SenorFusion12]

That looks way too complicated to do myself... I'd rather pay a pro like you to do it.

[@AnthonyJ350]

Thanks, come on down!

[@willsonbess1]

no

[@willsonbess1]

No it does not

[@mobileempire5522]

So if a authorized dealer is required that means just don't buy Compustar!!!

[@AnthonyJ350]

It means you get it installed by an experienced technician. Just save $50 a week for a few months and you can afford it.

[@Tizocr]

bad video of installation

[@AnthonyJ350]

Thanks for the feedback

[@masonrichardson6581]

Lies! You need a computer and a $20 usb programmer... Anyone can do this if they have common sense

[@AnthonyJ350]

Ya I'm pretty sure you won't install it as nice or will it be as reliable unless you work in a shop. How many Volvos, and R33 GTRs have you remote started?

[@masonrichardson6581]

AnthonyJ350 what the hell does an R33 have to do with not needing one of you bigots to flash a Blade. Good luck ASSuming, you just lost a subscriber (;