APO-1T - Survival Lilly knife - DESTRUCTION TEST - UNTIL IT BREAKS - STEEL: AUS8

www.buymeacoffee.com/JOEX
canadianpreparedness.com
www.survivallilly.at
New Survival Knife by Survival Lilly - APO-1T
TORTURE DESTRUCTION TEST OF THE SURVIVAL KNIFE FROM "SURVIVAL LILLY" THE APO-1T (APOCALYPSE TRACKER KNIFE)
TIP TEST EXTREME - UNTIL IT BREAKS
FIXED KNIFE - KNIFE TEST - FIRST IMPRESSION
BRICK TEST, TIP TEST, TORTURE TEST, CAR STABBING
KNFE REVIEW - FIRST LOOK - DESTROYING - UNBOXING
- DEATHBOXING - BREAKING POINT - KNIFE REVIEW
STEEL: AUS8
MADE IN TAIWAN
APO-1T SHOT with a GLOCK 17, 9 mm
SHOT with Assault Rifle STEYR AUG, 5,56 mm
SHOT with SHOTGUN in the car
Steel: AUS8 produced by Aichi Japan
Blade Thickness: 4,7 mm
Handle Length: 12,9 cm / 5.07 inches
Overall Length: 28,4 cm / 11.18 inches
Weight (including sheath): 544 gramms / 19.19 ounces
Rockwell Hardness: 57 Rc +/-1
Handle Material: Black G10 with green line
Tracker style shape for better chopping!
Kydex Sheath
‪@ufprogear‬ ‪@Clawgearcom‬ ‪@survivallilly-deutsch255‬

[@auroraborealisknives4019]

Those who think AUS8 is weak need to think again 👍

[@lobotomite9767]

Aus 8 is fine on a cheap knife but this isn't a cheap knife bro. And why the hell would you chose it in a fixed blade over 1095

[@vassili8577]

lmao just add 50€and get the tops one

[@auroraborealisknives4019]

@@lobotomite9767 AUS 8 is stainless, AUS 8 has higher toughness than 1095 and edge holding is comparable I would never choose 1095 over AUS8

[@tugbandi]

@@vassili8577 Watch Joe's Tops Knives videos. Except for one, he destroyed them all.

[@auroraborealisknives4019]

@@vassili8577 I’m not a fan of tracker style knives personally

[@SurvivalLilly]

Hahaha that was the most epic knife destruction I have ever seen. YEAH!! Not a lot of knives survive your crazy testing. You rock!!! I am glad you like the knife. This is exactly why I love AUS8 steel.

[@joex]

yeah, i totally agree, AUS8 is one of the best steels to use for a survival blade!! u are totally right!!!! all the "steel-fanboys" still arguing for 3V and other "supersteels", they are wrong!!! awesome blade my dear, this will be my #1 Zombie blade!!!!!! greets!!

[@SurvivalLilly]

@@joex yes! In a survival situation I want a tough blade and not a brittle one that breaks immediately! Also AUS8 can be easily sharpened! I hope the APO-1T will serve you well for many years!

[@lonewandererbushcraftwildc6822]

@@SurvivalLilly congratulations you have a good blade there mate 🙂

[@joex]

@@SurvivalLilly it will for sure!!

[@joex]

@@lonewandererbushcraftwildc6822

[@whammofammo7346]

That held up rather well. The heat treat is amazing for AUS8.

[@joex]

it truly is!

[@thegreyghost2789]

Lilly did mention that the tip was thinner than the APO-1S, which is this knife's only weakness, however slight. I think either one would last the average person through several lifetimes.

[@joex]

i agree!

[@moicus29]

I like that he doesn't do torture tests. He does destruction tests.

[@joex]

true!

[@kennethkrieb3018]

Another awesome video. Thanks Joe X!

[@joex]

u are welcome Kenneth!

[@hemppu6974]

Better than expected

[@joex]

sure!

[@TheWtfnonamez]

Superb test on a very interesting knife. I own two APO-1s and they are cracking knives. Very well designed, very solid, and very well heat treated. Lilly gets a lot of grief from the internet knife police for using AUS8 but it certainly seems to be a great choice for the application it is used for here.

[@joex]

"internet police" haha, yeah, thats true, she is doing right with AUS8, i am 100 % sure!

[@adambacker8178]

Awesome knife. Awesome destruction test. Joe X has an incredible amount of energy

[@joex]

thanks a lot!

[@_laude__]

Great video as always. Love the scenery too.

[@joex]

haha, u should visit this are, check your email!

[@douglasreed9237]

That's freegin amazing! It stood up to the metal pole test. 😲 Not many make it and the bending back and forth is what broke the tip. If it was thicker I don't think you would have broken the tip. Damn Impressive Lilly my hats off to you nice selection on the steel used.. Great review JoeX, Thanks 👍👍

[@joex]

U are welcome, this blade is awesome!!!

[@thanoshalo7102]

Love your videos on knife destruction. Your the best knife tester by far.

[@joex]

thanks Thanos, are u playing in that movie??

[@thanoshalo7102]

@@joex ..lol...maybe in a different reality 😄🤣

[@brr8888]

Great test!

[@joex]

thanks!

[@pullo5518]

Great video and test, that is an awesome blade, very impressive.

[@joex]

thanks , it truly is!

[@JoeDoomsday]

Awesome Video! This knife did a Great Job. I felt it was a bit overpriced But,... after seeing how much abuse it can withstand, I'm definitely buying one for myself. Thumbs up to Lilly on her new APO-1T tracker knife.

[@joex]

cool Joe, you will like this blade!!!

[@tugbandi]

Wow, she did her homework.

[@joex]

yes she did!

[@timsimmons9995]

Wow. I just watched the torture test of the SurvivalLilly knife and will be buying one soon! Looks outstanding. Very impressed.

[@joex]

cool! thanks!

[@nicolanicola1067]

Wow, lama impressionante direi! Eccezionale! Sei grande Joe!

[@joex]

Thanks!💥💥💥🤟

[@theanonymousprepperchannel]

Another impressive video my friend your content gets better and better each video. 👍😎

[@joex]

Thanks!🤟

[@carlsberg-gs6rl]

"Lilly! Come with me if you want to live!" Smooth bro. Smooth. Hahahaha

[@joex]

yeah,, thanks!

[@alexandrealfier9165]

Merci Joe

[@joex]

u are welcome!

[@alanread8468]

Fantastic knife

[@joex]

👍👍👍

[@V3g3t41987]

you crazy sob lol! that ending was hilarious! i love your videos joe x . lol reminds me of the street fighter bonus stage where you have to destroy the car lol! ive literally never seen anyone tear a car apart with a knife until i found your channel a few months ago. you produce some of the absolute best knife toughness tests. would be super awesome if you could do some tests with cpm 20cv as i recently purchased one to use as a deer knife. edge retention was pretty awesome but id love to see what happens when they are put against your tests. to be more specific i purchased a hogue deka in cpm 20 cv

[@joex]

thanks for your comment, glad u like my crazy shit!!! i will note your knife!

[@V3g3t41987]

@@joex after seeing how this aus 8 performed i ordered me a aus 8 folding tanto from bladehq. thank you joe x for putting me onto a great survival steel. i went with the 5.11 scout tanto in aus8. was only 25$ how can i lose? lol. i never plan to abuse my deka, so i guess id rather see the 25$ 5.11 scout tanto in aus-8 go against your tests.

[@joex]

@@V3g3t41987

[@c.h.u.d]

Pssh what did a deer ever do to you..go hunt some humans now THATS where the action is at!!

[@kevinfischer8295]

Great Video, wow this ist a strong Knife.

[@joex]

it truly is, thanks!

[@jorgefernandez6407]

I like that knife! Great video Joe... Sold!!!

[@joex]

cool, u wont regret this blade!

[@SortisTV]

Wieder einmal ein tolles Video! Da wissen die Leute auf jeden Fall was sie kaufen :D ach und dein Auto fällt auch bald auseinander... dass es überhaupt noch fährt ist ein Wunder :D liebe Grüße. Diesmal auf Deutsch

[@joex]

danke mein lieber Sortis, VW ist Qualität, der hält schon noch!!!

[@SortisTV]

@@joex :D den kriegst du sicher auch noch kaputt

[@joex]

@@SortisTV ja sicher, den Winter wird er nicht überleben!!!

[@Mr.Miyagi907]

Wow...this video was amazing....knife distruction by hand, shotgun, pistol, rife and than Mad Max style car driving... Amazing!

[@joex]

thanks a lot Gabe, glad u like it!!!!!!!

[@ciscokidkid6580]

I still love my Gerber strong arm.

[@joex]

i love it too, but now i have a new love!

[@richardthompson1239]

I had to buy one as soon as I saw his vid on it !

[@cowboykelly6590]

Yes, I sure do love my Strong Arm. 🤠🖖

[@joex]

@@cowboykelly6590

[@mmiller73]

Impressive! I was not interested in it’s predecessor due to the AUS8 steel and the price but it appears to be very well heat treated and ground. AUS8 and 420HC are incredibly tough steels when heat treated properly. They just don’t hold an edge very long. If this was offered in Sandvik 14C28N I would probably get one.

[@joex]

ok, cool!

[@eternaltale6482]

When you show this knifes together ⚔️, they remind me cult videogame God of War swords- Blades of Chaos! Fantastic knifes!

[@joex]

thanks, they are awesome!

[@douglasreed9237]

Pretty damn tough I'd say. It took a lot of abuse. Maybe a thicker blade it could have taken more but I'm not sure if it would be worth it. JoeX you got to test the SXB next. Nice work Lilly,👍👍

[@joex]

Sxb, i will try to get one!

[@henrythomasmarten]

in a few thousand years time our decedents' teams of archeologists are going to get real confused when they start investigating your ground! Nice work, keeping us amused and informed now, keeping the future confused.

[@joex]

thanks Henry! they will find a lot of "bodies" around here!!!

[@henrythomasmarten]

@@joex wink

[@Jo_Blo]

The knockoff preformed very well! I wonder how it'd compare to a Tops Tracker 1, both r about same price too. I figured the aus8 would do well tho, I've got a few Kizlyar Deltas made from it that have taken some abuse. Thanks again for the videos;)

[@joex]

u are welcome! Tops would be interesting....

[@Steve_G88]

Very impressive

[@joex]

thanks!

[@InLakech_AlaKin]

Definitely best knife channel ever! Who wakes up and says 'I want to beet the sheet out of knives for a living'?! Joe X did. And with great success! Cheers mate!

[@joex]

thanks a lot!

[@bdwillis8284]

I'm ordering one! What a beast.

[@joex]

it is a awesome blade!

[@ralfyellowknifedietl6159]

I love this tracker knifes 👍

[@joex]

cool blades!

[@JoseMartinez-yy3fc]

Hola amigo ! Buen video Buen cuchillo , salió tan duro de matar como el Morakniv Robust 💪👊.

[@joex]

gracias amigo!

[@charliemarks9649]

Exactly, why Cold Steel used AUS8A their version of the steel for Sooooo Long. It is a Very Tough Steel, easy to sharpen and nearly rust proof. Yeah, it might need some extra sharpening than super steels but if you sharpen often it takes no time and can be fun. Lilly's handle and Trekker shape is Super Functional.

[@joex]

Agree 100 %🤟🤟🤟👍

[@c.h.u.d]

Aus8 nearly rust proof"?..no

[@Ringwolf1]

This is what I understand about a torture knife test, great video.

[@joex]

thanks!

[@vietnamsurvival7213]

No rpo

[@MGDownUnder]

This video made me laugh. Thanks for this very informative and entertaining test of Survival Lily's awesome knife!

[@joex]

U are welcome!!🤟🤩

[@MGDownUnder]

@@joex the most laugh I got was when I saw that that wrecked car still drives! Lol

[@joex]

@@MGDownUnder 💥🤩🤟

[@joex]

it is a VW - german quality! haha!

[@MGDownUnder]

@@joex LOL..good shit :D

[@Unknown-vq8zc]

Gutes video mach weiter so

[@joex]

danke!

[@Nxtrice]

Yes, this was awesome.

[@joex]

i was for sure!

[@prasaite]

The best part JOE X drive a red car what survived multi stabing from lots of knives. My jaw just fell on the flor

[@joex]

haha, cool, glad u like it!!!

[@bernhard7658]

250,- is much money for AUS8, but it performs really good. This one proofs that perfect hardening is an very important thing. More important than steel quality.

[@joex]

yes!

[@robertschuitema6242]

yo thats amazing for aus8

[@joex]

indeed!"

[@johnsinclair2869]

U iz one crazy mudder tucker awesome video

[@joex]

🤟

[@Guardian4080]

That AUS8 preformed amazing, better than i thought it would. Awful expensive knife with cheap steel though. You're a beast Joe!!!!!!!!!!!!!

[@joex]

thanks!

[@avim4896]

Awesome video Joe. Just a clarification, what do you do with those wasted plastic bottles do you send it for recycling or does it stay there

[@joex]

hey man, i am a nature boy, i burn it!!!! no, recycling of course!

[@billienomates1606]

Now that is a focking knife test, Respect.👍

[@joex]

thanks bro!

[@armyrepelentcz4090]

:-D OMG first 10 second i am total ...:-D :-D very good :-) video JOE X 🙂

[@joex]

thanks!

[@taunushabitat9000]

Good test. I still think, AUS8 has been chosen by intention, because it's weak to avoid breaking. Hence, I wonder that the tip is coming off that quick and that much. However, you need to decide before purchasing, whether you like to have a blade with an edge retention that resists a lot of wood work before geting dull and an appropriate better overall performance or a blade that is less effective for generic usage, but due to weak AUS8 tuff for abuse.

[@joex]

thanks a lot!

[@naecatalin2637]

Im thinking to buy one to, is really strong overal.

[@joex]

cool blade!

[@siegfired10xx74]

This channel is awesome ! 😂😂

[@joex]

thanks!

[@anticaguerriera]

Epic Video, Wow!!!Thanks Joe X, Hard test, Hard knife, Hard Mission Hard Man,..🚗....Wrummmm😎

[@joex]

gracias Antica, kabuuummmm!!!

[@anticaguerriera]

@@joex 😆😸

[@mrbucket9636]

Damn it Joe you made me buy another Knife! You sure have a way of convincing me.

[@joex]

u need it!

[@tundra.runner]

Another good knife from APO ! 👍

[@joex]

indeed!

[@charles17508]

Wow

[@AdamCeladin]

Awesome channel !!! You have to test my throwing knives :D

[@joex]

oh hello! i know you from YT, the super thrower!!!! i tested some CS throwers, some were good! i could test yours! where to find them?

[@andrewfournier8817]

More heavy Aichi steel looking good.. How about a side by side of the Ontario Rat1 in D2 and AUS8? Cheap to do, might be educational... Archi steels seem badly underrated

[@joex]

this steel from the APO 1 T is awesome, comparison, maybe!

[@IrfanOmercic]

I've been carrying an American Lawman in AUS8a for the last 10 years or even more. Do you have any plans to test the Sleipner steel?

[@joex]

Sleipner, is the lionsteel sleipner?

[@IrfanOmercic]

@@joex Yes! M5 for example.

[@joex]

@@IrfanOmercic 🙏👍

[@herrfuchs4712]

What an impressive video and test. This kind of knife has not the geometry which i prefer but the AUS8 steel performs one again great (even greater than the hyped and overpriced 3V steel). I hope you will test also the two Reini Rossmann knives. I think they will perform not bad.

[@joex]

Yeah, awesome blade the apo1t - Reinis knive, maybe!!!!

[@c.h.u.d]

3v has much better corrosion resistance and takes an edge better there's more to knives then just brute strength. They can be strong as hell but not if it's a pile of rust

[@herrfuchs4712]

@@c.h.u.d My AUS8 blade never had corrosion. Survival Lilly used them in salt water and also had no rust. I think AUS8 performs also better by corrosion resistance than 3V. Only edge retention is better but this is for me only relevant by a folder not that much by a fixed knife.

[@flamabr]

Kkkkk show man. U smash the knifes and the brave VW. Like.

[@joex]

my VW still loves me!

[@flamabr]

@@joex Volkssaur still alive

[@agrippaagrippa1815]

Wahnsinn dein Test! Deine Testungen sind wenigstens Aussagekräftig. Nicht das ewige "batoning" was jedes Küchenmesser schafft. Welches Lilly-Messer empfiehlst du? Gruß aus Oberösterreich!

[@joex]

servus, danke!! habe das APO1S ja auch getestet, sind beide geil! aber das neue ist schon der Hammer! bessere Scheide hat es auch! aber wenns dir zu teuer ist, dann machts das 1S auch! beim 1 S hält die Spitze halt mehr aus!

[@WednesdaysWastWendigo]

Man Joe X seen the durability of survival Lily's knives whenever the tracker becomes available in America I'll get it but right now I'll save up to get the APO one

[@joex]

cool, u wont regret it!!!!

[@Omegaparsec]

I would love to see a best 10 compilation/summary video of your tests…

[@joex]

i will do that!!

[@Omegaparsec]

sweet!

[@Dilvish_The_Damned]

Freaking fucking awesome!!!

[@joex]

yeah!

[@d.b.hemlock]

Hey brother, Quick question for you about the Shotgun test. Are you using Buckshot or Birdshot pellets? I'm not seeing much pellet spread. Buckshot is a nasty powerful round that's for sure!

[@joex]

i use Buckshot, but the "normal" version, all shotgun tests withe the same ammo!!!!! "birdshot" would not break a blade i think!!!!

[@joex]

Name: RIO 12/70 36 G 4,0 MM ROYAL 36

[@d.b.hemlock]

@@joex thank you much brother! I was curious about that! Appreciate the info!

[@ElectronicsComputers]

That was super enjoyable to watch. I'm surprised that VW is still running.

[@joex]

yeah German cars were good back in the days!

[@MasterPhilip616]

Lilly seems to have designed one Hell of a survival knife. 🙌 What're the chances you'd be willing to test an Aitor? The Oso Blanco has always been my go to survival knife. It rides in my pack when it's not on my belt. I'd love to see how much of your abuse it could handle.

[@joex]

it is a good blade!!!!

[@johnkeck1025]

Survival Lilly should be known as Lilly of the knives.. she makes some good ones!

[@joex]

indeed she does!

[@matthieuf9869]

You should try a s7 steel knife

[@joex]

maybe!

[@stephenclarke3990]

So much for "Weak Aus 8" ❗ Wow, What a thorough destruction test, makes Lily's look like child's play in comparison. Well done 👍🏼

[@joex]

it is an awesome blade!

[@stephenclarke3990]

@@joex Due to your video Im now considering buying one.

[@cold485]

"We need to be freaking sure"😂😂

[@joex]

indeed!

[@milododds1]

How fast can a woodchuck chuck? Answer: Not quite as fast as JOE X!! Only losing a small amount at the tip isn't bad at all considering how much beating Joe X gave it in terms of the abuse. Hopefully nobody in their right minds would ever treat their equipment like this but good to know what it can take. I'm impressed how many hacks and whacks he's given during this test...JOE X you're absolutely dedicated to this test, great job!! Btw I am subscribing to your channel going forward, you're dedication needs to be rewarded.

[@joex]

thanks a lot, and welcome to the show of crazyness!!!

[@alaskaraftconnection-alask3397]

In my experience... AUS8 has held up long term. For me, it is a reasonable steel selection when it comes to several factors that should not be ignored: 1.) Most often 'blades' are stamped out of sheets of AUS8. This process helps create consistent results and is cost effective batch to batch. 2.) Both versatile and rugged/strong... having dependability attributes of Vanadium (impact resilience), Silicon (stress resistance), Molybdenum (lattice strain ie. it's going to take more to completely f-up the knife). High chromium (like 14-15% for corrosion resistance plus importantly tensile strength). To sum this stuff up you can get a tough hard working knife out of this stuff. Add to this small batch runs by a single quality/consistent manufacturer and good design qualities... You should see good results for the testing you are demonstrating. I think Lilly's knife held up very well. Regarding the scales: A.) Is bolt hardware for scales and liners not so good? or B.) Do you think proper torque and Loctite would have been a game changer? Without doubt Lilly did a good job with attention to detail on the ricasso and transitioning geometry into handle. Handle looked really good, but once the handle hardware fell off, I could really see this part of the design benefitting overall dependability.

[@joex]

yeah, loctite the screws, and they would have held up longer, they are the same scales as for the APO1S, and those scales were hard to kill!! i also shot them!!! check my vids!!! when i would have screwed them togehter when they came loose and loctite them, that would have done the job i think!

[@joex]

this knife is one of the best in good looking, and durability, fine tip but good stabber!

[@alaskaraftconnection-alask3397]

@@joex Yes maybe and hopefully so. Interestingly Checking torque and Loctite (green like same for firearms use) is what I highly recommend on Cold Steel Knives (like the Demko thumb-plates etc.) I also wonder if the APO series are AUS8-A vs AUS8? AUS8-A is generally tougher from annealing process, however it may have more rolling and not take/hold as sharp an edge. If I was to totally beat on a knife --- I'd go AUS8-A. If I wanted to get the finer edge (believe it or not in this category) I'd go 8cr13mov. If all I was looking for in category was sharper edges and seeking sharpness retention then 14c28n

[@SurvivalLilly]

@@alaskaraftconnection-alask3397 according to my factory in Taiwan it is AUS8 without the A

[@alaskaraftconnection-alask3397]

@@SurvivalLilly Thank you for the reply Lilly. This makes sense to be AUS8 vs. AUS8-A. I'm pretty certain it would be more available selection by being made in Japan and now supposedly some in China. That being said... they are recipe-wise, composition of the same steel with ingredients... the exception 'maybe' that AUS8-A gets heat treatment for slightly different properties. The strange thing is (not too certain on reasoning) that some use AUS8 & AUS8-A referencing interchangeably. Cold steel for example referenced AUS8-A in a wide use range from discontinued versions of SRK fixed to Finnwolf folder. Ontario RAT Model 1 Folding Knife has always referenced AUS8. I've been told annealing is the only difference... still appears hard to determine brand to brand.

[@roguesheep1747]

Keep sharing and posting Joe X videos on comment sections of other knife channels or debate channels o and Facebook share the shit out of them on there ...because its nice to be nice 👌

[@joex]

thanks a lot my friend, really cool from you!!!

[@SwampOperator]

Joe X got that Tony ferguson cardio

[@joex]

Tony who?

[@sniper9556]

Very crazy Man 😂😂

[@joex]

thanks a lot!

[@icon520]

Excelent bro..

[@joex]

thanks!

[@mrmcbeth]

It's been too long since I've seen one of these videos. It's a breath of fresh air. I was surprised at the performance of this knife. It's pretty awesome. I would also like to know more about the gun laws in your country. It seems like a place I might like to visit.

[@joex]

gun laws are ok here, but i prefer America!

[@bobjohnson1633]

Borders are open. Visit Mexico city, then catch a bus to Texas!

[@joex]

@@bobjohnson1633 😬

[@jonathandiamond6801]

​@@joexAmerica...F-ck yeah!

[@iscariotproject]

if you dig the design check out the movie the hunted where it gained its fame

[@joex]

ok, i will do that!

[@tim7640]

please test the ontario RTAK 2 it is like the esee junglas in cheap

[@joex]

i will try!

[@tim7640]

@@joex thanks, awesome videos

[@vietnamsurvival7213]

No pro

[@flamabr]

Animal Joe. The blades cry in your claws. Relax Lilly

[@joex]

yeah some do!

[@1977aliveandkicking]

I think I understand what this scientist is doing. He is looking for a cure for the handles falling off the blades. The problem with Blades has become an epidemic. Falling of the handle is a very worrying disease. Recently, two of my favorite blades contracted the same virus. It seems to me that this vibration therapy with the use of wood, stone and iron is not very effective. I also tried preventive therapy, like you, I treated the blade between the pipe and the wood, I tried to rub them deeply into the blade, but it didn't help, even though I massaged them really hard, it didn't help and soon the handles fell off. We will have to be patient until the manufacturers find a cure for this virus. Maybe soon a new drug in a tube will appear on the market that will be universal and prevent the handle from falling off, maybe there will be a magic glue approved by the researcher Joe X?

[@joex]

the handle scales of the APO1 S did not fall off! also during shooting it, they did awesome!!!

[@edanpino-xt1ph]

I’ve always preferred O-1 tool steel to anything else but the AUS steels are pretty damn good. Blade isn’t my favorite designs but a good tracker blade is more than enough for almost anything woodscraft

[@joex]

ok cool!

[@alinnimeni3789]

I think it's a major improvement over the previous one. This is where all the money is, for those who complain about the price. Regarding the tip, i think she needs to work on geometry- it broke because of geometry, not HT.... Hey JoeX, are you active military? ( the way you walked back with your rifle bought back memories for me, seen it before and not in civilian life 😉)

[@joex]

it is a cool blade, rest is classified!!!! haha!!!

[@alinnimeni3789]

@@joex No prob my friend, i got my answer 😉 Maybe we'll meet someday on the field 😁😉

[@joex]

@@alinnimeni3789

[@MylesDavid]

Dude! AWESOME EPIC video!! Would you say this is way better than the Becker BK? Rate it on a scale of 1-10! 😬 Lilly should be proud of what she’s created!! Nice work Joe!! 👍🏼

[@joex]

thanks a lot! yes most def. better than any Becker, tough as the Ontarion SP6!! or even tougher! if 10 is the best, i would give it a 9, because the tip broke off!

[@MylesDavid]

@@joex Gotcha! I think you should make a T-shirt that says: "NO THIN TIPS" > 🤣😬🤣

[@vietnamsurvival7213]

No reo

[@joex]

what?

[@vietnamsurvival7213]

@@joex shit pro

[@joex]

@@vietnamsurvival7213 u have the shits?

[@joelwinkler484]

which knife is is better the APO 1S or APO 1T? pleas tell me your opinion. every body is welcom to this duscusion.

[@joex]

for survival - APO1S for slashing Zombies APO 1 T !!!

[@joelwinkler484]

@@joex thanks

[@ELK1-1]

Grandiose Vorstellung ! Kann man dich buchen ? 😁🤘

[@joex]

sicher, schick mir eine mail!!!!

[@ELK1-1]

@@joex du bist genial, mach weiter so 👏

[@joex]

@@ELK1-1

[@kwaakwamtayola8210]

Didn't know knife-testing could very so dramatic! Should be a show.

[@joex]

yeah! thanis!

[@Imazdadrags]

I'd like to see a paper cut test after the car door whacking

[@joex]

thats boring!!! and makes no sense to me!

[@Imazdadrags]

@@joex just shows how sharp the knife still is after its had all that abuse..

[@evenhand7743]

👍👍👍👍👍👍

[@1Rabble-Rouser]

Team JOE X 💪

[@joex]

thanks Skully, is Mulder with us?

[@1Rabble-Rouser]

@@joex In spirit only👻

[@joex]

@@1Rabble-Rouser

[@mbawewe1]

Strong knive

[@joex]

it is!

[@dadanene6820]

ODLIČAN VIDEO😊.,VOLIO BI VIDJETI KAKVE SU BACAČKE SPOSOBNOSTI NOŽEVA KOJE TESTIRAŠ PRIJE BRUTALNOG TESTA😊😊😊POZDRAV IZ HRVATSKE 😊😊😊

[@joex]

thanks a lot!

[@bjornzschernack7653]

Der Typ ist so crazy 😍 so entertaining..

[@joex]

yeah, after my 3rd corona vacine, something went wrong with me!!!!

[@bjornzschernack7653]

@@joex i wouldn't say wrong.. ;-)

[@joex]

@@bjornzschernack7653 🤣🤣🤣