Aqualand batteries draining fast in cold weather

#citizenwatch #aqualand #citizenwatches #promaster #citizenpromaster

[@davebrune4001]

I was thinking about this yesterday when I was watching your video on these. Your expertise and knowledge is very appreciated..😎🙏

[@plasticindices3385]

Many thanks dear friend! Much appreciated! Take care and stay tuned for more content on the channel soon!

[@sumahama1981]

Excellent video! Thanks! 📺📼

[@plasticindices3385]

Many thanks dear friend. Glad you liked the video. Stay tuned and see you soon 🤝🏻🤝🏻🤝🏻

[@marcel1981noordwijk]

Cool!!

[@dusumcakita1840]

Useful, thanks for the video! 🎉

[@johnm674]

Thank you for making the video. I have a 1st gen aqualand. I did lose 2 screws for the case back. Any advise on where to purchase replacement screws and gasket?

[@plasticindices3385]

Thanks John. Most parts are readily available on Ebay. The screws are easy to get. There is one seller from Israel on Ebay who sells the seals, super affordable. Check it out.Thanks for watching and stay tuned 🙏🏻🙏🏻🙏🏻

[@craigchittum1289]

Do you have a video on how to change all the gaskets on CO23. I just installed new batteries but the gaskets haven’t been changed for over 20 years. eBay has a gasket set 399-5294 there’s also another kit 399-5295. Any help would be most appreciated thank you.

[@plasticindices3385]

No. The most difficult part is to change the rubber gaskets around the pushers (2 mini-seals per button). I will probably make one video about it soon. Thanks for watching.

[@georgioschatzidimitriou7473]

Hi what rubber O ring do I need to replace old one !? Thanks

[@plasticindices3385]

they are special rings. you must source one from ebay or places in germany.

[@marioarellano5917]

Are any of your aqua lands for sale?

[@plasticindices3385]

Yes, please send me a message to the email address in the description of this channel. Cheers and thanks

[@tonytom60]

I've just changed the batteries on mine but can't get the analogue part restarted. Cleaned all the terminals etc and voltage which is good, then the restart sequence but nothing but the digital part working. Any ideas.

[@plasticindices3385]

Ok see the gear system that makes the analogue part work? Drop a little buttane gas and then one little oil pint on every gear pin (these are the pinky pivots you see on the top, the jewels). If this method doesnt get the gear train working try loosening a bit the screws on the gear plate. If this still doesnt get your watch working then it must definitely be the coil. You must get an aqualand for parts. Check out ebay. Hope this helps friend. Good luck.

[@tonytom60]

@@plasticindices3385 Thanks for the speedy reply. I'll let you know how I get on

[@tonytom60]

@@plasticindices3385 looks like the analogue part is dead cleaned up the box etc but getting no pulse from the analogue part with the tester

[@kevindougherty593]

do you have any videos on how to take the inside apart for cleaning? my batteries leaked inside & I need to clean/service. thanks for any help