No video

Aqualink 2.0 Install Tutorial (4/5)

  Рет қаралды 19,578

varx

varx

Күн бұрын

Simple Aqualink 2.0 installation part 4. In this a five short part series you will find the benefit of having internet connection to you Pool and Spa. Installation of a internet connection allows turning on your backyard environment from anywhere in the world!

Пікірлер: 12
@markrnaustin
@markrnaustin 5 жыл бұрын
Thank you for commenting about the wire organization! As a home owner that opened mine, it was a mess and the only folks that worked on it, were the installers!
@michaellennon9561
@michaellennon9561 4 жыл бұрын
I love the fart blasting @ 1:28!
@sabat7689
@sabat7689 2 жыл бұрын
awesome tutorial!!! Ready to do mine. Who farted at minute 1:28? lol
@lordTowle
@lordTowle 3 жыл бұрын
I had to have the wifi antenna connected to the red port on the right, and the existing pda antenna hooked to the red port on the left. I don't know why but, it wouldn't work with the antennas switched. I couldn't find anything that said there was a difference or that it mattered.
@r3jk8
@r3jk8 Жыл бұрын
Someone sh*t their pants while making this video! 😂
@hegerwalter
@hegerwalter 6 жыл бұрын
green (4) = ground, yellow (3) & black(2) =data, Red (1) = power, @ 2:00
@hegerwalter
@hegerwalter 6 жыл бұрын
black - spa side 5:18
@hegerwalter
@hegerwalter 6 жыл бұрын
I have a Aqualink rs8 controller hooked up to a Hayward pool heater (see kzbin.info/www/bejne/b5yYeWOAoNWjj8k at 7:06). I see the 4 pin on the Aqualink control. Which of those lines connect to the common, spa and pool line on the Hayward heater? I think that the black (2) line connects to the spa line, the yellow to the pool line and the white (not one of the 4 pins) should connect to the common line? Is there a site which discusses the connections?
@varx1
@varx1 6 жыл бұрын
Valtér Hégér No the heater only hooks up to the 24 volt 2wire heater port on the GREEN 10 pin connector Hayward will not communicate to jandy and vise a verse
@varx1
@varx1 6 жыл бұрын
Valtér Hégér Heater only hood up to the common and pool or spa 2wire conductor
@varx1
@varx1 6 жыл бұрын
Valtér Hégér Jandy 4 pin RED com port is as follows Red 24v Black common Yellow Data Green Ground
@sewerswan8422
@sewerswan8422 4 жыл бұрын
You can use the fireman switch and attach it to the green pin I believe for communication
Aqualink 2.0 Install Tutorial (5/5)
3:41
varx
Рет қаралды 13 М.
Aqualink 2.0 Install Tutorial (1/5)
5:19
varx
Рет қаралды 23 М.
나랑 아빠가 아이스크림 먹을 때
00:15
진영민yeongmin
Рет қаралды 2,7 МЛН
SPILLED CHOCKY MILK PRANK ON BROTHER 😂 #shorts
00:12
Savage Vlogs
Рет қаралды 50 МЛН
This Dumbbell Is Impossible To Lift!
01:00
Stokes Twins
Рет қаралды 35 МЛН
Why Romex Doesn't Belong in Conduit: Quality and Longevity
6:20
abrelectric
Рет қаралды 62 М.
Aqualink 2.0 Install Tutorial (3/5)
4:53
varx
Рет қаралды 38 М.
How to Convert Pentair EasyTouch Intellitouch to Jandy I AquaLink RS8
22:49
Telecable providers  do NOT want you to know this Trick
4:07
simple & fast
Рет қаралды 7 МЛН
#1 DIY Electric Mistake - Can you use Romex Wire in Conduit?
3:44
Silver Cymbal
Рет қаралды 875 М.
iAqualink 2.0 Mobile Device Setup and Installation
6:19
ePoolSupply
Рет қаралды 95 М.
How to program variable speeds on Jandy iAquaLink pool pump
6:35
Jandy IAquaLink complete installation and connection to your phone
21:02
Steve The Pool Guy
Рет қаралды 1,4 М.
Running electrical to an Intex pool.
4:21
Type 5 Reviews
Рет қаралды 44 М.
How to set up I-Aqualink for your pool
5:06
Craig Wooster
Рет қаралды 124 М.