Arai Helmet - Lining removal and refit

[@FatherOBlivion]

Excellent. Wasn't sure where to start installing the comms on my new Arai. Thanks for this!

[@mymoto-uk]

Hi FartherOnlivion. I’m really happy if this has helped you in some way with your comms installation. Thank you for watching and leaving me a comment 👍

[@sebusiek]

Thank you. You are my Arai rescuer :)

[@mymoto-uk]

Hi Sebusiek. I'm really glad that my video has helped. Thank you for watching and letting us know 👍

[@manbiteslife3110]

Thanks for this video, it is really helpful. Thanks for making it even with so little requests

[@mymoto-uk]

It was our pleasure. Hopefully it helps a few Arai owners.

[@ThatCluelessBiker]

Well … I wish this video came up before the official Arai one that said to remove the chin part first. Think I’ve wrecked that part taking it out like they said!

[@mymoto-uk]

Hi thecluelessbiker. It’s a real shame if the official video has caused you to damaged your helmet. If there is anything you ever want to know that can help you in the future then just leave it in a comment and I’ll make a video on it. I’m happy that you watched our video and liked it. 👍

[@motorjack141]

Can you make a video installing comms on this helmet? Thanks

[@mymoto-uk]

Hi Jack. Thank you for leaving us a suggestion in the comments, we are more than happy to do this for you. I'll see if I can get one done and uploaded this week for you. 👍

[@motorjack141]

@@mymoto-uk thanks!

[@muaythai1814]

Looking very forward to this.👍​@@mymoto-uk

[@motorjack141]

Hi, i got the Astro Gx, asian variant of this helmet in small, it fits ok but there is a bit of a pressure in the forehead, how do i adjust the liner to make the pressure less on the forehead?

[@mymoto-uk]

Hi MotoJack. The fit of the helmet can be customised to make it a better fit for you. Unfortunately, it's something that really needs to be done in person by a trained Arai technician. You should be able to find out where your closed Arai center is via the Arai website. Thank you for watching the video and for leaving me a comment. Good luck with your helmet. 👍

[@anthonyfairlcough3888]

That red helmet on the table good un when you know you know..

[@rodrigo122727]

Having bought my first Arai a couple days ago, for which I've been saving, this video is a blessing as I didn't want to remove the lining without knowing how to do so properly when the time comes ahahah I'm looking to buy a dark visor for my Arai Quantic. Could you tell me what should I pay attention to? As the websites I was looking at my model doesn't show up in the compatible helmets for the different Arai visors

[@mymoto-uk]

Hi Rodrigo. Congratulations on buying your first Arai and I am really happy to hear that our video might have helped you. When you are looking for a visor for the Quantic, you need to look for a Vas-V visor. The are the same visor that is used on the RX7v and the old Chaser-X. They come in a range of tint's, from Light and Dark smoke, to silver and iridium colours. Thank you for watching our video and thanks for leaving me a comment 👍

[@rodrigo122727]

@@mymoto-uk thank you so much for the detailed information. Really really appreciate 💪 keep up with the great work 💪

[@JRMD]

Can you do a video on the removal and refit of the arai concept X or rapid/rapide neo?

[@mymoto-uk]

Hi JRMD. Most of the Arai helmet liners work in the same way. The only difference is that some of the entry level helmets have got fixed liners. I will do some more instructional videos on the Arai helmets though

[@JRMD]

thank you for considering this. Will surely wait for it

[@ivanzivojinovic1606]

Hi there, i have Corsair V in Large that i would like to make fit like M. Is it possible with thicker 10mm or 12mm liner or not really ? Thanks

[@mymoto-uk]

Hi Ivan. You can replace the internal pads for slightly thicker versions. Going up to a 35mm cheek pad and 12mm skull cap lining. That should then make the helmet fit better for you. 👍

[@ivanzivojinovic1606]

@@mymoto-uk is it also possible to go from S to M? Is Small size helmet shell the same size as Medium one ?

[@denywicaksono]

I cant use my glasses well, when use arai helmet

[@mymoto-uk]

Hi Deny. Wearing spectacles can make helmet fitting a tricky thing because not only are you trying to find a helmet that fits right and is comfortable, you also need it to work with your spectacles. If you already own an Arai helmet that feels uncomfortable with your spectacles, then sometimes a small amount of custom fitting, done by and Arai service center, can make it more comfortable for you. The only other option would be to try different styles of glasses with you helmet to see if that can help. I hope you manage to get something that works for you. Thank you for watching our video and thanks for leaving me a comment 👍

[@TheAben07]

Is the neckroll removable in arai quantic?

[@mymoto-uk]

It’s not removable in the Quantic but it is in the RX7v

[@az_studio]

Sir 57 & 55 have same side cheek pad? how about the top lining?

[@mymoto-uk]

Hi Az. They both have the same size check pads but the Small has a 7mm skull cap lining and the medium has a 10mm skull cap lining. The reason for the larger helmet having the thicker skull cap lining is because it shares the outer shell with the Large size outer shell.

[@az_studio]

@@mymoto-uk thanks for the details son. Appreciate it

[@ARay111]

any advice how to make any adjustments if the helmet feels slightly tight after having bought it!

[@mymoto-uk]

Hi Abhimanyu. The best thing to do is buy some replacement internal soft linings that are one size down from what you currently have. They are normally-5mm on the cheek pads an -3mm on the skull cap.

[@PetrolHeader]

@@mymoto-uk In the manual, it says that you can "remove" some foam away from the skull cap to give a bit more room. But it is a bit unclear to me which part exactly can be detached. I haven't found any detailed explanation anywhere (the picture in the manual really doesn't help).

[@ESSA20]

@@PetrolHeaderhey, did you mange to figure out which part is removable by any chance?

[@PetrolHeader]

@@ESSA20 I did not. I ended up buying a new thinner liner. I didn't want to mess around.

[@ferit7418]

Is chin curtain removable in this helmet?

[@mymoto-uk]

Hi Ferit. The chin curtain is held in with an adhesive so it is not made to be removed. If it was something that you really didn't want in, you could probably mange to remove it but it wouldn't then be easily re fitted.

[@ferit7418]

@@mymoto-uk Thank you for the answer and I want to ask you another question. I recently installed a pinlock and intercom correctly to my Quantic helmet. And today I rode a long way (+400km) after installation. I realized an issue. I start to hear rattle and strong wind noise from the left part of the helmet after +120km/h. I tried to understand it and it seems it is coming from left visor corner protection cap. When I push the cap to it's place, noise disappears. I few times opened and closed the cap but the issue remains. Do you have any recommendations to solve the issue?

[@closery]

@@mymoto-uk I think the chin curtain is very small in this helmet because it gets a lot of wind from there and in the winter it's very hard to use like that. Somehow can I use a bigger curtain? any advice on that?

[@mymoto-uk]

@@ferit7418 First of all I would check that the base plate screws are tight and also not split. If they are fine then I’d recommend replacing the base plate. They are the same as used on other Arai models and because of that they are quite cheap to replace.

[@ferit7418]

@@closery I bought shoei chin pad and put it and tightened on top of arai chin pad. By this way you will get much less wind from there. There is a video about it from a italian youtuber actually

[@andhikawayan]

Unfortunately cant remove neck roll for cleaning..why arai? 🥲

[@mymoto-uk]

Hi Andhikawayan. It’s one of the ways that Arai separates the lower spec models from their flagship helmet. Thanks for watching our video and leaving us a comment 👍