Brief walk through of how to tighten and adjust the shield on VAS generation helmets, applicable to the Corsair-X, Quantum-X, Signet-X, DT-X, and Defiant-X. Signet-X Sense Red Frost shown in video.
Пікірлер: 30
@robr28 Жыл бұрын
Lots of comments about not being happy with the seal no matter adjustment. I'm an ex arai tech, and we always carried some of that silicon lube you get with shavers, and rub it into the rubber seals. Keeps them soft and creates a better seal.
@closery2 жыл бұрын
Almost for 6 month I wasn't able to use locking mechanisim properly in my Arai Quantic and I thought it was normal 😭 All I need was just a little adjustment 😅 now it works perfectly! Thank you so much!
@TheGrimlocheАй бұрын
I just got a corsair X a little while ago. I was having a hell of a time closing it completely. This video helped with that. now it works like it should. I kinda wish this was a more known thing. Going to keep this in my favorites, just because I'll forget if I get a new bucket
@Sylvia-yd2gw3 ай бұрын
Perfect video - glad that I found it.
@Invis_Space11 ай бұрын
I’m having a problem with mine, no matter how much I adjust it the visor won’t lock open. When I get to 40MPH it slams shut 🥲 Great video btw. Thank you for upload. Very useful 🙏🏻
@Juvie993 жыл бұрын
When I bought my arai from a store, I didnt think it would be complicated to open the visor. I'm riding and I close the visor. Suddenly fog builds up. I tried opening it on the move and I was basically blind. I had to pull over and take off the lid and google it. It felt so flimsy, I was terrified of breaking it haha.
@sdqdfyl2 жыл бұрын
I'm so butt hurt that my brand new almost $800 Arai leaks air like a cheap $100 helmet...... Hope this will fix it.
@dutramtamang3129 Жыл бұрын
Did you fix it?? Did it work??
@lungtamik4 жыл бұрын
I followed this method several time trying to adjust my visor on my RX-7V but I always seem to get a little gap between the seal and the visor in the lower corner opposite side of the latch letting air through. I've tried several methods but somehow I am always able to slide a thin paper from the inside through the visor and always at the same spot.
@squirms4 жыл бұрын
I just spent an hour going crazy at trying to close this gap in the exact same area as you. No matter how far in/out or high/low i move the base plate there is always a gap, i can press it and hear it touch and come off the seal. Tried it on 2 different visors to make sure one wasnt bent or whatever. Im hoping that little gap is the reason i have a whistle noise.
@juanm.h.60993 жыл бұрын
I have the same issue with mine and no solution found so far. This is supposed to be a high end helmet ,very exoensive by the way, but uncomfortable to use. Arai never again.
@MotonJoy2 жыл бұрын
I have the same issue with the Arai Quantic model, no matter how hard I tried to readjust the visor the gap between the seal and the visor in the lower corner opposite side of the latch is always there. I have a whistling noise that obviously comes from that gap. Poor design from the famous Arai company😒😒!
@mr.kneeslider2 жыл бұрын
Same here.. good to hear I'm not the only one with a problem on the Quantic, its enough of a problem that air blows into my eyes... rather uncomfortable. Swapping to a Shoei NXR 2 now.. tried few original Arai shields, always the same.
@dutramtamang3129 Жыл бұрын
I have a corsair-x and yes.. Mine has that whistling sound too, after I go 65-70mph. I dont like it. After I saw these comments, I am convinced its because the little gap that the shield leaves. And my lock is not even perfect. However I still love Arai. Not a quite helmet at all. But definitely a safe, comfortable and the best looking helmet for me. Ride safe yall ✌🏻💪.
@fangsaken4 жыл бұрын
Thank you.
@mike-uh8rk Жыл бұрын
I'm on my 3rd signet helmet in 15 yrs. Only thing that fits my head. But each variation the shield latch gets worse. This latest is the most aggravation. If you don't slam it shut it won't release, even then it's hard. Very dangerous if it's fogged up. Would Bell or shoei PLEASE make a long oval helmet!
@RevolverMaxx3 жыл бұрын
Just bought a brand new Corsair X and there is a gap on the bottom right. Opposite side as latch. No matter what you do you can’t get it to seal. This thing was $1044 to my door. What gives? What’s the fix? Crazy that my $200 icon never had sealing issues. Please help me be an Arai customer for life. So far it looks like this will be my first and last Arai if I can’t get the visor to seal fully. A problem like that literally defeats the purpose of a visor.
@AraiHelmetAmericas3 жыл бұрын
Please contact our offices directly at either info@araiamericas.com or 610-366-7220 Monday - Friday 9am-5pm EST. We will be able to better assist you with your issue via direct contact. Thank you.
@MotonJoy2 жыл бұрын
I believe this is a known issue to Arai that can't do anything about it. Probably Shoei found the solution by installing to its new models a latch positioned at the center of the visor over the chin, so there will be no eccentric pressure while locking.
@heartbreak0_14 жыл бұрын
I've tried this methode while installing the ratchet and visor back after cleaning... But i got this sorts of problem in which the visor is not tighten enough when its lock to the lock switch...can you help me with this problem??? Cause iam worried when i crashed my bike... The visor would open and gravel would struck my face...
@Juvie993 жыл бұрын
happened to me after I first removef the visor. It just takes a little more effort to push the visor down with a few fingers to get it over the demist post
@Enemiesexposed Жыл бұрын
Mine is loud af, and its driving me insane.
@noobswassup88853 жыл бұрын
This so great finally i got the answer... do you need to torque while tightening?
@AraiHelmetAmericas3 жыл бұрын
Just hand tight is fine no torque setting needed.
@HaiMalonBodoh5 жыл бұрын
what arai design is this ??
@AraiHelmetAmericas5 жыл бұрын
Signet-X Sense Red Frost
@HaiMalonBodoh5 жыл бұрын
thank you :D
@harrygilbert37383 жыл бұрын
I’ve been an avid Arai fan for 10 years +, owning a number of helmets. I’ve owned the Chaser X now for 12 months, and I have to say, due to the new visor system, I will never buy another Arai. It’s shite. Absolutely shite. It’s an absolute ball ache to open whilst riding, taking several attempts. It does not close unless you apply excessive pressure, thus, concentration, whilst riding. Sometimes it will not close, and I have to pull over and use two hands to close it. I’ve been back to the Arai ‘approved’ shop where I bought it, only for them to tell me that it’s fine and it is as per design. Absolute crock of shit helmet. £550 - waste of money for such a crucial feature of the helmet to be poorly designed as it is.
@Ducatijay723 жыл бұрын
I struggle with this too, it's as you close it and try to open again at lights or whatever, it's probably great on a track as it won't lift in wind, I thought I was doing something wrong with that little moving lever, I thought it must do something but it don't , I'm actually tempted to remove the edge on the plastic bit that you are talking about so if pulls away easier, anyway have good un and ride safe 🖖
@czierwo Жыл бұрын
Funny that after adjustment, the graphics in the video isn't lining up lol! Nevertheless, I love my Corsair X. Comfy, doesn't pull sideways in crosswind etc. Now after some 3 years of hard use on street and track I am trying to adjust visor to seal and cannot for the life of me. May be that the side base plates have kinda worn tracks and need replacing? Maybe visor too? Nothing seems excessively worn out. However, does not feel very snug anymore, so that may be the reason why. It does kinda suck that such expensive helmet has such a guess work based adjustment. C'mon Arai, you can do better than this...