Arduino Controlled using TV or IR Remote

[@maker101io]

Source Code: create.arduino.cc/editor/mertarduinotech/9d107596-a93d-4406-835e-ecf8d63f189b/preview Recommended Items: Use Your Muscles in Project - amzn.to/3wdL45C​ 37 Sensor & Module Packages - amzn.to/3m66WeQ​ Try this Robot Arm - amzn.to/3fq8DCl​ Best Resin 3D Printer - amzn.to/39tY8KB​ Arduino Compatible Kits - bit.ly/2J2AFF7​ Banggood Spring Sale - bit.ly/3slMbOn

[@septuleptum]

Lol... I’m newbie, making my own ir project right not and i have exactly the same tv remote. So it was unexpected for me that tv remote can have two codes on the same button. I was scratching my head before you’re video showed up. Thank you so much, mate

[@PopAShmurf]

Didn't realize that there were already such good sketches that came with the library. Thank u!

[@splashillustrations3181]

Finally an ir tutorial, keep up the amazing videos ☺️

[@johnmungandi4413]

best video for irRemote finally you solved my problem Thank you so much

[@irishfitz]

I don't understand, I found the hex values, but I'd get an error saying that the hex value wasn't declared or something like that. So I removed the hex conversion in the ir example (just commented out /*, HEX*/ from Serial.println(results.value, HEX); ) and received an 8 or 9 digit number, I took that number and defined it in my new sketch as the corresponding button numbers and just like that the code complied and it lit up the leds. Why couldn't I just use the hex value as shown in the video?

[@saree_for_u]

GREAT..... I have a question, what if I want to light the LEDs for a duration of time?

[@durgeshshukla100]

Thanks for your nice video, could you help me how to simulate log key press(lets say I have to press and hold a key for 5 seconds )

[@zzzzzz...9902]

It works! It works! The dislike button works! No, just kidding. The project works great. Thanks so much. Also, the like button worked.

[@nikhilvarghese1767]

Can you please send me the program please I need to do project

[@govorilegko]

Thank you so much. What do you think is it not quite well if to use analogWrite(pin, 100) for LEDs (instead of (digitalWrite(pin, HIGH)). Then we have not to use resistors and configure pins as OUTPUTs.

[@govorilegko]

thank you. even thought if to use 100 power level instead of 255 full power level? is not it (100) equal to 2v?

[@manthan14190]

Did you try to run this project with external power Supply. Not with laptop or pc usb power. 5 v dc power Supply.

[@huseyint]

Merhaba, KEYES marka aynı kumanda ve receiver kit ile denemeler yaptığımda aynı tuş için farklı farklı kod üretildiğini gördüm, tutuş yönüne göre rasgele farklı kodlar da okunabiliyor. Aynı testi evdeki başka IR uzaktan kumandalar ile denediğimde sonuçlar daha tutarlı, bir tuş için hep aynı kod geliyor. Bunun hakkında fikriniz var mı acaba? Teşekkürler videolar için.

[@ardiantamarindra621]

WHAT THE HELL , THIS VIDEO IS HELP ME !! THANK YOU !! *i feel so very happy because hardly find that way*

[@TrungTran-hw7ws]

Can I have your background music name, feeling relaxed... Also love your project, keep up the good work.

[@vinayprakashshubham2742]

can i get some idea how to make it stm 32?? can you send some links for that??

[@neurokid686]

where do you get the serial monitor pls help me SOS

[@phatoofperformance6717]

When I try to upload the program to my board it keeps telling me 'unable to find numeric literal operator 'operator""FBF807' could somebody help me out please?

[@ABID5]

What's the range?as normal ir remote?

[@abhaysharma5155]

please make an video on ir flame sensor

[@shivhansoti8634]

Can you create a video of controlling leds using esp8266??

[@shivhansoti8634]

Along with Android app

[@mukilannayagam4970]

Plss upload Circuit diagram for this......

[@ekdilipkumar]

nice and clear practical video. Thank you.

[@sumenchoudhury3861]

i dont understand 2nd remote code setup, please explain it, how to use single button for on and off led. please

[@muhammediqbal5520]

pls provide a circuit diagram for feature vedios

[@kaanekz]

Farklı kumandalardan da alabiliyormuyuz sinyali elinize sağlık güzel olmuş 😂

[@kaanekz]

Mert Arduino Tutorial & Projects teşekür ederim detaylı açıklamanız için 😂

[@iqbalanas8161]

Thank u Sir ! it's working and u helped me a lot Thank u again.

[@haiduyanang2150]

Thanks Mert Arduino, it works :))))))))

[@parthajana3365]

Sir what will be the arduino code for connecting two ir remote sensor with single arduino

[@IslamUniverse]

nice work.keep going on ;)

[@AydinGokce9000]

cok yardimci oldu desekkurler

[@marilynstuart1546]

code is not acessible at the website shown

[@riseoftech4k332]

nice job, just explain a bit more the code next time

[@muhammadfarhan8500]

What is the code, if it is pressed on and when it is released off

[@mukilannayagam4970]

Is it possible to use mobile applications instead of remote??

[@ULTRAINVENTIONS]

yes

[@namonamo2037]

i want this kind of videos good

[@adityarai7674]

okk make a complete robot with lcd , ping , temprature , and bluetooth

[@ramykishk4201]

man i love you you saved me thx

[@kvlpnd]

Great video....

[@TARUNVERMA911]

that looks great

[@oliverdeleon4417]

I get the same error as all the other tutorials "exponent has no digits" someone help! not sure what i'm doing wrong.

[@AL7ARTHI77]

thaaank youuu very much

[@sathishkamal9660]

I'm down load the remote libraryin library and also in emample file. This program is open .but I can't execute it. The error message is IRremote.h: No such file or direcrtory

[@petermaker76]

My aurdino problem is No Protocoal: Aurdino uno r3

[@theechoss3752]

Can any remote control

[@petermaker76]

can you please help me My aurdino board is not running correctly

[@nothingtosee840]

How did you make your IDE background dark

[@_ssmna]

There is a "Dark Arduino IDE" app you can download.

[@vanthong6964]

Thank you so much.

[@DearKush]

I am getting different values for same button

[@minigabilafresa]

How is it that you use the code of the second control to set them with the same button? I do not get it :(

[@madeariartha2546]

same question

[@minigabilafresa]

The code that was used in the second control, the LED turn on with the same button to turn off.

[@maths_master100]

I don't uploading any data in Uno constant mismatch error plz help me

[@adityarai7674]

can you make a robot with ir sensor

[@arnobmondal1640]

It's working. Bt after a single button press. I need to reset the arduino. Otherwise next press didn't working.

[@francescosavoja2249]

Solved, thank you...It's working well! Nice project

[@hannahadornado1965]

how did you fixed it?

[@francescosavoja2249]

Hannah Adornado You have To DOWNLOAD the sketch,Not open or copy-past The sketch

[@francescosavoja2249]

*library not sketch,sorry

[@Osmanity]

I need same help please i have try my best for hours and only get error! Class decode_results has no member named"address".

[@Arvhbvh]

I Faild i think it is the code

[@Vishank]

it is an awesome project

[@Max_Weight]

Thank you very much man I was struggling very much but thanks to your video it works thanks man!

[@Max_Weight]

Mert Arduino and Tech Any time!! ;)

[@СухозанетАртьом]

Thanks

[@sumenchoudhury3861]

led tak to thik he. jab me isko relay board se koi high voltage ac light connect karta ho tab remote thik se kam nehi karta. 2-3bar press karne se ekbar kam karta he

[@chidaluchukwuneke9078]

I cannot access the code document

[@Edmorbus]

very nice : )

[@talkingnews2364]

didnt work, someone helps me? i have the galileo board and when i compile the program appear an error called "no such file or directory" someone knowns why?

[@abhaysharma5155]

have you installed the library

[@innovationdad2398]

and my arduino board will not connecting to laptop plese help me

[@raphelb7671]

why do I buy a remote control for my project

[@innovationdad2398]

sir the code can't upload

[@ahmedsaman3070]

❤️❤️❤️❤️ cool 😎

[@ahmedsaman3070]

Mert Arduino Tutorial & Projects You deserve it❤️❤️❤️&you are welcome ❤️

[@MDFRESCUER]

Nicely.

[@innovationdad2398]

you also make a car

[@Fabian-iy3je]

The code doesn't work :(

[@gadgetguy2199]

love it

[@asenjogonsa3868]

i cant upload the scetch why??

[@yt_show7967]

me too someone answer us

[@haneen3731]

@@yt_show7967 late reply, but did you download the library?

[@innovationdad2398]

its soooooooooo coooooooool

[@francescosavoja2249]

error: Class decode_results has no member named"address". Please help me

[@francescosavoja2249]

Mert Arduino Tutorial & Projects //------------------------------------------------------------------------------ // Include the IRremote library header // #include //------------------------------------------------------------------------------ // Tell IRremote which Arduino pin is connected to the IR Receiver (TSOP4838) // int recvPin = 11; IRrecv irrecv(recvPin); //+============================================================================= // Configure the Arduino // void setup ( ) { Serial.begin(9600); // Status message will be sent to PC at 9600 baud irrecv.enableIRIn(); // Start the receiver } //+============================================================================= // Display IR code // void ircode (decode_results *results) { // Panasonic has an Address if (results->decode_type == PANASONIC) { Serial.print(results->address, HEX); Serial.print(":"); } // Print Code Serial.print(results->value, HEX); } //+============================================================================= // Display encoding type // void encoding (decode_results *results) { switch (results->decode_type) { default: case UNKNOWN: Serial.print("UNKNOWN"); break ; case NEC: Serial.print("NEC"); break ; case SONY: Serial.print("SONY"); break ; case RC5: Serial.print("RC5"); break ; case RC6: Serial.print("RC6"); break ; case DISH: Serial.print("DISH"); break ; case SHARP: Serial.print("SHARP"); break ; case JVC: Serial.print("JVC"); break ; case SANYO: Serial.print("SANYO"); break ; case MITSUBISHI: Serial.print("MITSUBISHI"); break ; case SAMSUNG: Serial.print("SAMSUNG"); break ; case LG: Serial.print("LG"); break ; case WHYNTER: Serial.print("WHYNTER"); break ; case AIWA_RC_T501: Serial.print("AIWA_RC_T501"); break ; case PANASONIC: Serial.print("PANASONIC"); break ; case DENON: Serial.print("Denon"); break ; } } //+============================================================================= // Dump out the decode_results structure. // void dumpInfo (decode_results *results) { // Check if the buffer overflowed if (results->overflow) { Serial.println("IR code too long. Edit IRremoteInt.h and increase RAWBUF"); return; } // Show Encoding standard Serial.print("Encoding : "); encoding(results); Serial.println(""); // Show Code & length Serial.print("Code : "); ircode(results); Serial.print(" ("); Serial.print(results->bits, DEC); Serial.println(" bits)"); } //+============================================================================= // Dump out the decode_results structure. // void dumpRaw (decode_results *results) { // Print Raw data Serial.print("Timing["); Serial.print(results->rawlen-1, DEC); Serial.println("]: "); for (int i = 1; i < results->rawlen; i++) { unsigned long x = results->rawbuf[i] * USECPERTICK; if (!(i & 1)) { // even Serial.print("-"); if (x < 1000) Serial.print(" ") ; if (x < 100) Serial.print(" ") ; Serial.print(x, DEC); } else { // odd Serial.print(" "); Serial.print("+"); if (x < 1000) Serial.print(" ") ; if (x < 100) Serial.print(" ") ; Serial.print(x, DEC); if (i < results->rawlen-1) Serial.print(", "); //',' not needed for last one } if (!(i % 8)) Serial.println(""); } Serial.println(""); // Newline } //+============================================================================= // Dump out the decode_results structure. // void dumpCode (decode_results *results) { // Start declaration Serial.print("unsigned int "); // variable type Serial.print("rawData["); // array name Serial.print(results->rawlen - 1, DEC); // array size Serial.print("] = {"); // Start declaration // Dump data for (int i = 1; i < results->rawlen; i++) { Serial.print(results->rawbuf[i] * USECPERTICK, DEC); if ( i < results->rawlen-1 ) Serial.print(","); // ',' not needed on last one if (!(i & 1)) Serial.print(" "); } // End declaration Serial.print("};"); // // Comment Serial.print(" // "); encoding(results); Serial.print(" "); ircode(results); // Newline Serial.println(""); // Now dump "known" codes if (results->decode_type != UNKNOWN) { // Some protocols have an address if (results->decode_type == PANASONIC) { Serial.print("unsigned int addr = 0x"); Serial.print(results->address, HEX); THIS LINE MAKES PROBLEMS. CAN YOU HELP ME PLEASE? THANK YOU :))) Serial.println(";"); } // All protocols have data Serial.print("unsigned int data = 0x"); Serial.print(results->value, HEX); Serial.println(";"); } } //+============================================================================= // The repeating section of the code // void loop ( ) { decode_results results; // Somewhere to store the results if (irrecv.decode(&results)) { // Grab an IR code dumpInfo(&results); // Output the results dumpRaw(&results); // Output the results in RAW format dumpCode(&results); // Output the results as source code Serial.println(""); // Blank line between entries irrecv.resume(); // Prepare for the next value } }

[@Osmanity]

i also get the same error as Francesco Savoja Serial.print(results->address, HEX); help please i have try my best for hours!

[@stevenyamada70]

IRsendDemo won't compile #25 >Search Github issues.

[@francescosavoja2249]

Ibrahim Osman You have to download the library,not copy-paste. Than you will find that in "examples"

[@pursueexcellence7737]

same problem here!!! SOS!!!

[@dariusniculescu3376]

Dont works with arduino nano

[@weamattar4204]

It did not work with me and I do every single steps the same :(

[@sumenchoudhury3861]

me try kiya work ho raha he. lekin problem ek he. jab me relay se 220 line se bulb connected karta ho tab remote ka switch 3-4 bar press karnese ekbar on/off ho raha he

[@howtoteen4672]

Do you have any music other than that? thats just getting annoying

[@7oda88]

Please add

[@saifriad1679]

😍😍😍