Are the RBP Power Steps Better than Amp Research Power Steps

[@albartlett2887]

I'm on my second truck with Amp Research power steps. They've been great. 4 years on my RAM and over 2 years on my GMC with no problems. I didn't pay $1500-$1600 for mine. It was more like $1200-$1300 but I didn't get the Extreme. I would think they're more. I don't lift my trucks either. Winters can be tough here in New England sometimes with slush, ice and salt. I had a problem with ice once but that's the only problem I've had. I installed these steps on both my trucks and it wasn't very difficult. My son put Amps on his Chevy truck and he hasn't had any problems either. I can't figure why others have had problems. I never heard of Amps having bad motors either.

[@Temptation_Offroad]

Finally my RBP Stealth steps have shipped out and will be arriving this Friday!! 😁😎

[@DieselLegiance]

Nice 👍🏼

[@LivinWith3M]

Matt, I can only speak for the AMP and mine drop down extra low XL. Same as you. I absolutely love mine. Also I’m a new subscriber. Awesome content brother.

[@DieselLegiance]

Thanks brother 👊🏼

[@buddy9200]

Great job on your review of RBP vs AMP, I have a 1980 Jeep Cherokee laredo 2 door Wagon that RBP would be perfect 👌 I am going to order today. Thanks big time for your video.

[@chickennbiscuits8176]

Glad I saw your video! I just replaced electric step hinges that were on a dodge power wagon. It took over two months to get the hinges. Nearly $400!!! I have a single cab ram 3500 dually not 4wd but sits pretty high. I’m going to be looking for some steps for it soon! Thanks again I am going to check out your installation of these type steps.

[@hrishikeshpatil6962]

Glad I watched your video. I'm also not too keen to have it plugged into my obd port so this is a perfect workaround to it.

[@lelandjefferson8510]

Good explanation, I appreciate the comparisons. Nice truck!

[@4wd35]

Really liking the steps and back glass.

[@sherryYYC]

This is a great video! Thank you! I have had my 21 F150 for a couple months now and I think I've settled on a 6 inch lift. I was thinking of going with the extended drop steps also because I'm short haha.. I'm going to check out your install video too

[@SeymourMacProductions]

I knew i could trust this review when you said Pennsylvania. Thanks for the insight.

[@kevinmurphy3464]

Really good review. Totally helped me make-up my mind against buying AMP’s product.

[@Henrymichaelball]

2 motors could be 2x the chance of failure?? cheap is not always better with a design flaw, had my AMP steps for 3 years....flawless.

[@DieselLegiance]

Had my RBP steps for that longs with no issues…Flawless as well. But now the RBP Extended steps cost the same as Amp Extreme steps and $2k is crazy 😜

[@c.j.pearson6191]

Thank you for the review. Been debating between RBP and Amp

[@Henrymichaelball]

Dont be dumb. When spending that much don't chinch out 200$

[@jakemerica]

Good overview. My one complaint about Mopar power steps is the 1 inch gap when they're tucked up. Wish mine were more streamlined like yours. Mine also don't have lights which blows given what they charge for em.

[@peterking8665]

Wonderful review and im stuck on your gorgeous truck. Sincere thanks Pete

[@2pi628]

Very good review!! Exactly what I was looking for! Thanks!

[@sumtingwong4997]

Ok I'm convinced. Thanks for the explanation

[@stephenreese5921]

Good informed! Especially about the use/non-use of the vehicles OBD port.

[@Temptation_Offroad]

Thanks to this video I just ordered the RBP extended drop steps from summit racing for my 2012 Ram with 8" lift and 37s. Summit racing site says a expected ship date of June 25th for them. So hopefully they will ship out late june or early mid july🙏🏻. Great review and im glad you explained the difference between the amp steps and RBP, the obd port and dual motors was what helped make up my mind along with the extended drop and sleek fit. Thanks again!

[@DieselLegiance]

That’s awesome…keep me posted how it goes!

[@Temptation_Offroad]

@@DieselLegiance Yup will do, I will have a few videos of my 2012 Ram truck on my channel later this summer as well. First i have to get fender flares painted and installed and a few other minor things. Love your truck and color of the truck as well. I wanted a megacab in the granite crystal with a lift and 37s but couldn't find anything for under 53k😔. Prices have gone crazy. So i settled for a black 2012 with 8" lift 37s with 89,000 original miles instead.

[@spymat72]

I agree with this video 100%. My problem with these is they are out of stock everywhere, online, amazon and RBP. I contacted RBP a few weeks ago through email, telephone etc. and I have still to hear back from them. Then I hear through different chat rooms that they may be calling it quits! (which again is why i tried reaching out to them to confirm). So, if I'm getting No customer service Pre sale, Im worried what its going to be like post sale.

[@DieselLegiance]

I thought I read something somewhere that AMP was trying to sue RBP as their step design was too close to Amp’s so maybe that’s why there is an inventory pause with RBP?

[@securenc1]

@@DieselLegiance I guess we can take it for what it's worth, but just off the phone with RBP. They're saying the steps are on backorder and no plans of closing. The guy I spoke with says the steps are made overseas (not sure where) and was saying the manufacturer was hit hard - also again guessing because of Covid and the plant is still shut down. He thinks production will resume soon and told me to add my email to the "notify me" list and they will let me know once the steps are available again.

[@DieselLegiance]

Ok that’s good. I hoped they would stick around as the steps are amazing in my opinion.

[@t.p1234xyz]

If they go out of business, there goes your 5 year warranty.

[@DieselLegiance]

Yep but that’s the case with any company.

[@ninjamagic5150]

Dam one nice truck. If I had the cash I would build it just like that .

[@gregs8678]

Great video man definitely helped me decide. Also what front tow hooks are those they look bad ass

[@CrinosAD]

I came here in search for power steps for my 2003 RAM 2500. AMP have a version called Extreme, that have dual motor, but the price is linked to the name... I liked this one, as you said, I don't want more stuff plugged into my OBD plug.

[@jerrelandmichelle]

Great review that covers everything pretty well. Awesome rig too.

[@duccimann9089]

Very clean truck.. NICE!!

[@wtc1979]

Amp would be better for this truck. They sit a little lower. My AMP open as soon as I hit the door handle basically. These are much slower. Amp has a smoother extraction too. There’s a little click on the platform at the end of the extraction point with these. They’re just running boards after all and your truck is 🔥 🔥 🔥 either way!!

[@dmsdms2707]

Like these better than the amp research , they are tighter to the truck

[@miguelitomigra543]

Been rocking AMP steps for three years now. Never had a problem...120 degrees to -6 degrees. Been there every year for three years. But hey, to each his own.

[@DieselLegiance]

That’s great...I think Amp is a good company and has a good product.

[@anthonyjordan3634]

Which amp steps do u have???

[@DieselLegiance]

Me? I don’t have Amp steps. I have RBP extended stealth power steps.

[@lesliechow7286]

You been rocking them? So they work as rock sliders or are you just “posing”?

[@DieselLegiance]

I have power steps because I have an 11” lift on 40” tires so the steps help getting in and out of my truck easier. I don’t rock climb so never been a poser.

[@westernlover33]

I think Amp has a sensor to keep from accidentally closing ..for those guys that say their unit is freaking out.. I think maybe a call to Amp asking how to clean that sensor would be in order. Just saying

[@timothyjamesbeardsley4985]

Great video very detailed I enjoyed. 2020 ram cummins in my driveway I made mistake of buying carbon steel side steps well in north east rust is already showing on the steps need to get something else

[@stewie84]

Thanks so much for this.

[@EscobarReuben]

I freakin' love the mods you did to your truck. You probably don't tow much, but if I did a similar suspension lift and tires, would it really hurt me towing light to moderate trailers or campers?

[@DieselLegiance]

You can definitely tow (I can) if you stabilize the truck like I did and use a drop hitch. Maybe add air bags to the back to minimize towing squat.

[@mikcun2799]

My biggest concern with either power steps is the durability. If I buy a truck part I want it to last, especially if I am paying 3-7 times as much as a stationary step. I wish there was more information in the reviews that have had failures. From what I have gathered the motors don't fall often, but the wiring on amp steps do. Also amp steps only have two body mounts, making the body more likely to develop rust.

[@DieselLegiance]

I like the RBP. They have dual motors per side. They have a 5 year warranty. Each step holds like 600lbs. And wiring was easy and protected. If your truck is not lifted you may not need them though.

[@davidmcelwee156]

Great video and explanation. Nice truck too 👍 I have the same rear window decal .

[@DieselLegiance]

Thanks 🙏

[@robertmckinney2804]

Look great bro and def not interested in anything going in the OBD2 port like the Amps. If you kept a little weight on these, will they stay down to clean em?

[@DieselLegiance]

Yes,

[@OffroadCpl]

Love mine they got great customer service

[@timwilson9922]

Awesome video,thanks for the info 💪 I want to know where you got that hood🤘

[@DieselLegiance]

Years ago on eBay.

[@johnward5845]

I was looking at the amps because they make a kit so you can buy whatever year and the kit will make it fit an 98-02, there definitely nice but idk about 1500 bucks for some steps lol

[@007Knightjp]

Like the video.. Great review and a good discussion Amp vs RBP. I believe that Amp have dual motors on each side now and also have an extended version for lifted trucks as well as an Extreme version for those who take their vehicles off roading a bit more.

[@DieselLegiance]

Thanks 🙏 and yes, Amp does but they are around $500 more than RBP.

[@svrblk777]

Cool! very slick and stealthier than AMP. Do both side steps retract when opening only 1 door? Does it have a manual on/off switch in case you dug into the sand, mud or snow? Thanks!

[@stephenchristian5739]

Huuuge! I LOVE MY RBP! YES GREAT REVIEW also mine were less EXPENSIVE ! MORE MOTORS MORE POWER MORE OPTIONS check it out several ways of mechanisms

[@bminus752]

I have the amp for 5yrs now I have to spray the mechanical parts but they been solid but I wish urs were available when I got them

[@timothyhandy5379]

Damn these are nice I definitely need a set

[@LB-xq7of]

Just wanted to let you know that Amp Research offers the "Amp Research PowerStep XTREME" which has two motors per side as well as the standard ones with only one motor per side.

[@DieselLegiance]

Yes. I did see that. Keep in mind though, the Amp extremes are almost double the cost of the RBP.

[@bc_usa]

Yes for $1,800.. 😐

[@grizleeone1]

That’s a nice truck man!

[@DieselLegiance]

Thanks 👊🏼

[@courtneyjohnson8815]

I need some of those 🤔

[@FieldWorxoverlandadventures]

Nice truck👍

[@raydelfa1125]

Thats Dope bro!!!! Where can I get a set for my 2021 Tacoma?

[@DieselLegiance]

I got mine from Custom Offsets but they have been hard to find lately in stock. If you do get something from Custom Offsets, make sure to let them know @diesel_harm sent you when checking out.

[@Knuckledragnation]

Clean steps and truck. Can you please attach the link to your install video of these steps. I own a 16' Ram Laramie Dually and am looking for steps like this that will hide. Plus my wife is only 4'9" so its difficult for her to get in the truck as well.

[@DieselLegiance]

Try this one: kzbin.info/www/bejne/o5Klan2DjtSnldkfeature=shared

[@Facepalm710]

I’m seeing both dual motor ones for around 2,000$ currently on their websites. Where are they available for half that? Good job in the video btw.

[@DieselLegiance]

I bought and installed mine before Covid so I’m sure inflation hasn’t risen prices a lot since then. Thanks 🙏

[@Facepalm710]

Did you get them through the BRP website?

[@DieselLegiance]

No, I got mine from Custom Offsets

[@Facepalm710]

Thanks so much! I appreciate you

[@nicklandrum1820]

The obd port connection is optional on amps

[@Kevin-vm9np]

Thanks for the vid

[@Jkruch10]

I really loved the style and look vs the amp. I orders a set in June of 2020 and have not received them yet. The company I ordered through says they are having issues with Amp complaining about RBP similar design and are not making them right now. So frustrated! I wanted these cause they look so much sturdier than the Amp.

[@DieselLegiance]

Ask for a refund, then go check out Custom Offsets as that is where I got mine. If you do buy anything there, let them know at check out that @Diesel_Harm sent you.

[@Jkruch10]

@@DieselLegiance ha thats where I ordered it from. They are local to me. I have done a lot of business with them. They were going to try and do something for me because of the delay. But suggested AMP due to the issue. Thanks for the suggestion though.

[@DieselLegiance]

Really? I never head of any issues with RBP power steps. Now I will say, Covid has been an issue with shipping everywhere.

[@Jkruch10]

@@DieselLegiance Yeah, I really thought that was the reason. And wasn't to frustrated and understood that being an issue. But seems to be an issue with AMP and a similar design.

[@DieselLegiance]

I know Amp finally came out with an extreme step but it’s almost $1800 for basically what RBP sells for $1400

[@jayr.1523]

Yea my ma is gonna need that amp XL

[@jacobcantu7953]

Great video 👍🏻

[@thuhaze5946]

Nice

[@Grinder101]

Was interested in these til I looked them up and seen they don’t make them for a 2014 f150

[@jimmy10142]

I just went to offsets page and seem to be no longer available, instead they now offer the AMP brand (for my ford)

[@sphillips6357]

great, but what about someone in a big medium duty or heavy duty truck. I blew out my knee but still want to drive my truck. It's 2 ft to the running board or if I removed the running board it's a 3 ft climb into my cab. I can't do it any longer because of my knee. So I'm out of work until . . .

[@DieselLegiance]

The extended steps are about 3” lower than standard power steps so they do make a difference.

[@CharlyMtz-1316]

Nice truck

[@pamelagay12]

Thank you

[@jamesk6579]

Good vid brah

[@nabielsuleiman7039]

Wondering what part number what is your amp research runningboards and where did you get them from everyone seems to have no stock on these runningboards and they won’t be in for months other than Amazon maybe I was looking and curious about where you got yours and if you have a part number that would be helpful thank you awesome looking truck to

[@DieselLegiance]

Mine are not AMP they are RBP extended stealth running boards. I got mine from Custom Offsets.

[@austinlaws7422]

Ik this video is old but now for my 21 crew cab ram 1500 these actually cost more than the amp steps….

[@DieselLegiance]

Yeah, I see that. I think since Covid happened, limited material availability and shipping delays, everything has gone up. Me personally, I still like RBP as I don’t want anything else plugging into my OBD2 port.

[@hello-qd8rf]

RBP have been back ordered for 9 months mine have be delay 3 times

[@DieselLegiance]

That’s crazy…sorry to hear.

[@TheBinfordMan]

What's the purpose of the 4 second delay? You're either in or out of the truck and you can't use them to access the bed unless the door is open. . . so the delay is lost on me. Doesn't seem like a real selling point.

[@DieselLegiance]

It’s more for if you are shutting the front door to go open the back door without the motors running all the time up and down wearing them out faster. It’s actually helpful.

[@TheBinfordMan]

@@DieselLegiance Makes sense!

[@84_Reasons]

Does anyone here had experience with this side steps in the winter? How do they do in frozen weather?

[@DieselLegiance]

I live in Pennsylvania so I deal with frozen winters and never had an issue with the RBP steps.

[@nickadams2951]

hey dude. how tall are you and how easy is it to get in using those steps? Im looking to do a similar build

[@DieselLegiance]

I’m 6’3” and the extended steps are awesome and make a big difference

[@devoncolvinable]

Amp come with one motor per board . That’s what I saw in a video

[@securenc1]

Hey Matt, so again today I wrote to RBP letting them know of my frustrations with regards to the Power steps being out of stock since 2020. I've been trying to get a set of the XL's since April 2020 with no luck. Last time I wrote RBP, they were blaming Covid for no stock. IMHO, that reason is no longer valid and unacceptable. That being said, are you concerned about getting replacement parts if yours have issues? I mean - what good is a 5 year warranty on a product that RBP can't even get themselves? I can't even get an ETA of when the RBP XL's will be available again.

[@DieselLegiance]

Not sure why the RBP extended steps are hard to find. I heard it may be AMP trying to stop them from selling them because they are similar steps at a lower price but I don’t have this confirmed?

[@wadebrewer7212]

Not to argue....but covid is still an excuse for many suppliers. Lead times on equipment and parts in manufacturing has doubled on som cases. Things that take typically 6 are taking 3 months. These suppliers wouldn't want to lie, they don't get paid until 30 days AFTER delivery. As much as our media likes to say we are in a down turn economy because they love drama, demand for everything is still very high. If it wasn't, inflation wouldn't be rampant on everything. To your point, is covid to blame directly? No. Indirectly yes. Labor shortages caused by people not wanting to work, the lasting effects of supply chain ripple from the disruption of covid, material shortages like rubber (un-covid-related) coupled with a slow supply chain. Welcome to the 2000s where you ordered things and had no idea when it would show up.

[@rrlandservice9017]

Steps probably come from china

[@Deltron6060]

@@rrlandservice9017 Another reason to buy the Amp ones, MADE IN USA

[@DieselLegiance]

Straight from RBP: RBP Stealth Power Running Boards are electric in every sense of the word. Open the door, they instantly deploy to welcome you into the vehicle cabin with a generous, well-lit platform, then automatically tuck stealthily away to blend in with the rocker panel when the door is closed. Stealth Power Running Boards are the epitome of rugged luxury. Precision engineered in the USA, Stealth Power Running Boards are crafted from military-grade aluminum that has been textured, ribbed and black powder coated for the ultimate durability, maximum traction and the best cleanability. Stealth Power Running Boards feature two motor assemblies per side to ensure smooth, even mechanics even in sweltering, gritty, sandy, or freezing, salty, slushy conditions. RBP Stealth Power Running Boards are covered with a 5 year warranty - so you're covered, no matter what.

[@jasonc2733]

So bought the RBP extended. The question I have is, if there is a way I can hook up without using the magnets?

[@DieselLegiance]

The magnets are used to activate the steps up and down when you open the door. You can always use the manual switch too.

[@jasonc2733]

@@DieselLegiance I just bought a RBP for my RAM 1500, I got the lower steps through your recommendation. There was a post that I saw that someone hooked it up to their dome light. Just wondering if anyone else have done that.

[@adventureswithnickhead6984]

I’d love to know where you are getting them for 1400

[@DieselLegiance]

I got mine a couple years ago for $1300 plus tax from Custom Offsets but todays inflated costs I believes they are up to $2k and Amp may be more?

[@zakaroonetwork777]

4 Seconds for Zombies to jump on your ride. How to delete the Delay?

[@DieselLegiance]

Shoot the zombies lol

[@rossburroughs6648]

Hey bubba I’m thinking about getting the RBP power running boards, are you still happy with the boards as of 10/23/22

[@DieselLegiance]

Yep, I have had zero issues and still love mine today 10/24/22.

[@silentbravo]

RBP doesn't make a set for any GMC/Chevy 2013 or older... that's lame. I sent a message to them about it, maybe they are designing some.

[@silentbravo]

Well they replied back quickly and said they are designing steps for many models but for my specific model it would be a long long time... haha

[@ajw3225]

They look great

[@jeremyw9213]

How do they hold up in the winter with the snow and ice? I live in PA so u know what the weather is like.

[@DieselLegiance]

I went through two winters and mine are still in great shape. My truck parks outside too.

[@jeremyw9213]

@@DieselLegiance Good to know, I also park outside. Just have to wait till they come back in stock now 😒

[@Ak47777-l]

Rbp steps are 2 grand now. Absolutely unreal, guess I'll just keep my original ones

[@DieselLegiance]

Inflation is killing everything.

[@Ak47777-l]

@@DieselLegiance Yeah it is. AMP steps are 1669 might go that route and save a few bucks

[@702muzik]

Where did you get the l.e.d lights

[@DieselLegiance]

Which ones?

[@bc_usa]

More like a 6 second delay buddy ..

[@angelc7984]

About how many inches does it drop? From the original steps?

[@DieselLegiance]

Roughly 3” lower than the standard RBP power steps.

[@luisgarza8961]

What lift are you running

[@DieselLegiance]

8” McGaughy’s Lift with a 3” Body Lift

[@23451031]

This step bar have fit for ford ranger series?

[@DieselLegiance]

Not sure, you would have to check RBP. Or try www.customoffsets.com and let them know at checkout @diesel_harm sent you.

[@23451031]

@@DieselLegiance thanks the information let me take a look!!!

[@rollingprobablecause19]

What part of PA are you in?

[@DieselLegiance]

Mount Pleasant

[@rollingprobablecause19]

@@DieselLegiance nice I live near erie pa

[@DieselLegiance]

Nice, I take the Fam up to splash lagoon sometimes

[@linteastwood7477]

More off shore hardware. Don’t be cheap, buy American made. Amp!

[@leithcastillo1915]

Hey Matt I have a 2015 ram pickup and I wld like to kno where can I find some of those power steps

[@DieselLegiance]

I got my RBP power steps from Custom Offsets.

[@MeMo-le7ps]

Bro! awesome video. I went with the AMP and I totally regret it. So I installed them on my 2019 Jeep 4 door Rubicon and look great but have been a HUGE pain. Now I don't think AMP is the issue but after I removed and reinstalled the door on the Jeep the steps go up and down when the doors are completely closed. It is SUUUUUUUUUUPER annoying especially when you are driving and hear that constant up and down of the steps. Sometimes it even goes down after parking for a few minutes like if a ghost opened the door. I think the issue is that these steps feed from door wires by the footwell on the passenger side and JL's have a retarded problem. The Jeep electrical plugs have these super weak pins that bend easily. So when you reinstall the Jeep doors and re-plug everything even carefully those pins tend to bend. So I was hoping AMPs have the magnet option RBPs do but I haven't found any information. Looks like I will man up, take the loss and buy RBP steps. I whish I would have known this before spending those 1500-1600 bucks.

[@Henrymichaelball]

Bad install obviously should have had installed by a pro.... Not seeing other with this issue.

[@smoothbore4377]

I rarely seek the advice or counsel of guys who wear their hat backward.

[@GeoffreySonnier-q2j]

Francesco Radial

[@KarenDavis-j9x]

Tate Passage

[@lesliechow7286]

Do these have adequate strength to act like rock sliders? Chows truck need protection. Me not think they do. $1500 stairs. Gay. Maybe Chow put these on and get barb wire tattoo on arm and some hoop earrings too.

[@securenc1]

Good luck on finding "any" power steps that also double as rock sliders!

[@sjwalker5696]

I think RBP power steps are out of business

[@DieselLegiance]

Really? I thought Covid just really messed up their supply chain and got them backed up.

[@sjwalker5696]

@@DieselLegiance I sure hope so because the price and the quality beat them all and I got the money in my pocket now I'm just sitting in limbo. 😂

[@DieselLegiance]

Try reaching out to them directly from their website or Instagram. I just checked my old messages with RBP and they said they were relocating their business during Covid and that slowed everything down.

[@sjwalker5696]

@@DieselLegiance You have the phone number

[@DieselLegiance]

[phone]

[@groundpounder21]

well this sucks....RBP website doesn't show the running boards for my 2020 ford f150 4x4. smh.

[@DieselLegiance]

Yeah that does suck. Probably because your truck is so new. I’m sure in the near future they will have them.

[@robertmckinney2804]

Hey bro looks like custom offsets has em for your f150 FYI.

[@groundpounder21]

@@robertmckinney2804 sweeeet. Thanks. Now the only issue I have now is that BDS is on 8 weeks back order for their 4 inch lift kits with coilovers right now. 😒👎

[@robertmckinney2804]

@@groundpounder21 friggen rona 🤣

[@DieselLegiance]

If you purchase anything from Custom Offsets, do me a favor and let them know at check out that @Diesel_Harm sent you. It helps me rank up as an Ambassador.

[@oldfarthacks]

So, unless they have grease fittings on the joint points, they will fail. All of these boards use a bushing on the pivot points that is a steel shell with a thin plastic bearing surface. The road crud gets in and then you get the dreaded board hangup. Want to know more, take a look at my series on rebuilding and setting up for grease fittings. kzbin.info/aero/PLoz-2IH4A2KsZiDXB0f-hhKZtAzO_wuO_

[@nxtgen2b416]

Nice truck!