Armeg Brick Line Runner

The Brick Line Runner provides a quick and simple way set up a brick line.
A spring loaded jaw securely clamps over a brick.
Brick Line Runner’s rubber pads grip tightly to the brick’s surface.
Simply place the clamps in position. Take up any slack by slightly moving one of the clamps and lay your course.
It allows for work where standard corner blocks or line pins can't perform. It provides you with a far faster and accurate brick line than the alternatives.
Brick Line Runner features precise line slots in the external jaw. Lines are easy to run around both internal and external corners. This allows you to work on adjoining walls simultaneously without resetting a line.
Manufactured from a tough PPR material, it has the strength and durability to withstand building site conditions.
Brick Line Runner is suitable for most smooth or raked bricks and blocks approximately 95-125mm wide.
Each Brick Line Runner set includes two clamps and 10m of brick line.

[@claytonsmith84]

Got a couple of these myself, and yes they do start to off if you pull it too tight, i judt put half a brick in front of it to stop that 😂

[@leshablossom]

last shot of it was pulling off the brick!!

[@pachma405]

1:52 not gripping very well.

[@stevens5541]

I bought some they are rubbish, the spring is weak and the gripper pads just peeled off after a day or two...very cheap and don't do a very good job

[@paulgumbley4868]

Marshalltown are better, open wider, and better made , cast aluminium.

[@yogeshkhare6799]

Order in india

[@sattarrahimi555]

👍❤️

[@bamboozag]

Most pointless accessory ever.. easier and quicker to just plug your line and pins in to the perp or bed?

[@daleywhaley]

That's ok up to a certain hight but becomes inpractical once you're up on a scaffold.

[@rhysthebricky2171]

Fitzbrick Clamps are better in my opinion.. 🙄