Assembles like IKEA FURNITURE!!!

[@corydonk]

I find that creators with such a large disparity between subscribers and views often make the best content 👁👁

[@suburbanbiology]

Thank you 🙏🏼 I appreciate every subscriber I get including you!

[@Christian6.1803]

Thank you for not leaving the raw, unttenuated sound of your angle grinder in video. Angle grinder noise is ruining 90%of the KZbin I watch. Subscribed.

[@ethanuke5544]

The skull cap at 17:52 goes hard. Rock on brother. All your vids are stellar.

[@suburbanbiology]

Thank you!

[@Swany247]

I don’t think I’ve ever seen such public notification of his commission on various tools and products, thank you for telling people, they should understand the whole story regardless, love ur vids thanks

[@williamriven]

Thanks for sharing your table build.

[@suburbanbiology]

Thanks for watching it and for commenting!! I appreciate both 🙏🏼

[@madhavaramanan5620]

Please keep making your long videos, it’s so peaceful

[@suburbanbiology]

I’m glad you enjoy them! Thanks for your support!

[@Ameredad]

Ingenious design, reckon it has been serving you well since, real great work man, congrats.

[@suburbanbiology]

Thank you! Cheers!

[@reer5340]

wow, you made it look so easy, but for everyone else make no mistake these type of skills cost money in one form or another and won't come cheap. You either pay in time invested or in money to someone with those skills.

[@suburbanbiology]

Thank you. My hope is that these videos will inspire others to gain these skills. Thanks for commenting!!!

[@vintageringsGarry]

I believe you are one best creators on youtube. I agree and feel gratitude and enjoyed your background music ( downloaded same to help my wife on her 3rd month recovering from two operations.) I should been doing my taxes. . Look fwd watching you grow in the future. Outstanding ❤

[@suburbanbiology]

Thank you for saying. I am wishing your wife a speedy recovery. 🙏🏼 Thank you both for your support. Take care!

[@vintageringsGarry]

❤

[@vintageringsGarry]

Thank-you, getting the place readily accesssble to bring her home

[@ping665]

I love your workbench. The versatility of it is amazing!

[@suburbanbiology]

Glad you like it!

[@mgfofoklahoma4018]

I think you need my husband as your new buddy. Your mind is like his and sense of humor!

[@nicgurkweitz389]

The only thing that I can recommend as I see it, is to add a welded on L plate where the bolts are (on the outside of the orange beam) to hook under the orange beam to prevent any give when applying twisting forces when using the vice. You never know how much you gotta whack something or try to twist something while it's clamped in a vice and the L plate being hooked under that beam will still let it slide in and out but will help prevent those twisting forces. Love the build and will most likely build one here myself shortly when I get the materials. Thanks for the video!

[@suburbanbiology]

Great idea. I have a bigger vise I may mount up someday. If I go that route I’ll add a stabilizer L. Thanks for your support!

[@matshagstrom9839]

this is some of the best stuff ive seen ob youtube, i did four years of metal shop in high school. have not done much after that but this has me inspired thank you!!! makes me want to make a donation

[@suburbanbiology]

Thank you for your kind words. I’m honored that you appreciate my work here 🙏🏼

[@STORMBRACE]

You are inspirational bro, I enjoy your brilliance and commend you on the projects you share, thank you for your time and I look forward to your future plans and videos you share, God bless

[@suburbanbiology]

Thank you for watching and for your support. I appreciate it!

[@coevicman3685]

Co-Compliance???? mmmmm the other half of your life..😳😮🤣😂 Great ideas many thanks. 👍🙏

[@CJWarlock]

The best welding table I've seen so far on YT. :) Congrats! Cheers. :)

[@suburbanbiology]

Thanks for watching. I’m glad you enjoyed it!

[@Lurksin1]

Those magnetic tools are really handy

[@suburbanbiology]

I love them! Thanks!

[@plainnpretty]

It’s a nice welding table Thanks

[@suburbanbiology]

Thanks for watching and for commenting!

[@mhpjii]

Natural Born Instructor

[@Dan_Soundgar]

Love the miter saw

[@suburbanbiology]

Thanks! Me too!

[@Preview43]

The moment I saw that WD40 being sprayed, I could smell it right through the internet.

[@suburbanbiology]

It’s crazy how olfaction can teleport us through time and space 😂 thanks for commenting!

[@Kami8705]

Love the video, but would have been nice to have the actual welding table in the thumbnail, not just a clickbait one that looks much fancier

[@mundoracer]

How flat is the table? Does it sag down in the middle at all?

[@suburbanbiology]

The table does not sag appreciably. When welded my gates in the fence video I didn’t notice any sag. Thanks!

[@sulf49]

This is so cool.. Greetings from Malaysia

[@suburbanbiology]

I’m glad you enjoyed it. Thanks for watching!

[@Josssi546]

Humble and entertaining, interesting, marvelous!

[@suburbanbiology]

Glad you enjoyed it!

[@darrellmora1319]

Looks like the camera tracker you were playing with at the end is, like most, a facial tracker. Apparently that's the easiest central body portion to program electronics to recognize.

[@suburbanbiology]

Yeah it seemed to be focusing on my face. Still better than paying a camera man. Thanks for commenting!

[@BeanCountersOfBengaluru]

One suggestion - the voice over audio and on the spot audio have different volume. I had to keep adjusting the volume as the video progressed. Hope you keep that it mind for future videos, All the best!

[@suburbanbiology]

Thanks for the feedback. I try my best to avoid that when editing. I guess maybe I should start using headphones to be more accurate.

[@mitchv.7492]

Nice work, but you should really add an HEPA fumes extractor to your table ;)

[@suburbanbiology]

Sounds expensive but I’ve always wanted one. The day I can get one for 500 or cheaper I’ll go for it. Thanks for commenting!!!

[@stxres]

Hey man! hope beryl isn't screwing you over. Love the content!

[@suburbanbiology]

We did well. Just some much needed rain. We are far enough inland to avoid most of the damage even in the worst hurricanes. Thanks for your support!

[@valerianpantsulia5137]

Good job and a great video. Thank you

[@suburbanbiology]

Thank YOU for watching!

[@akbychoice]

That’s a slick vise mount idea. How are you getting contact from your ground wire to each of the rectangular tubes with orange paint on the rack pieces?

[@suburbanbiology]

The beams rub against each other enough that they don’t need to pass the current into the orange pieces. Thanks for commenting!

[@DavidAlan.Parsons-z8r]

That's a good table great idea

[@suburbanbiology]

Thanks. It has worked very well for me.

[@alexanderkonczal3908]

the next area of refinement would be finding a way to get the table flatter. after that, maybe find a way to transform it into a fixture table. that'd be a total pain in the butt, though.

[@suburbanbiology]

Good points. Thanks for commenting!

[@gelolangit3660]

another great project bro!

[@suburbanbiology]

Thank you! Cheers!

[@cryptosimsihc]

new subscribers sir. from Philippines 😎

[@suburbanbiology]

Thanks for your support. Welcome aboard! From Texas 🙏🏼

[@Lurksin1]

How did you get started in tool accumulation, skills, etc?

[@suburbanbiology]

Started with a cheap welder and an angle grinder doing sheet metal work on old cars.

[@lrj678]

Seems like you're welding with flux core with little to no splatter. What welder and wire size/brand are you using?

[@suburbanbiology]

Link in description. Amazon welder called kicking horse. Thing is a flame thrower for a 120 welder. Wire is what they sell at Home Depot. 0.035”

[@rockscorner5991]

That laser rust remover is totally cool! The price, not so much! 😢

[@suburbanbiology]

Yeah I hope the price comes down rapidly as the tech gets more mainstream.

[@andrasszekeres7752]

Damn this is such a good idea, I want to make one too and gonna use a lot of your ideas, but I wanna make a smaller one. Any ideas?

[@suburbanbiology]

I think you can buy pallet rack segments that are less wide? Auctions and eBay etc. thanks for commenting!

[@andrasszekeres7752]

@@suburbanbiology I tried but there are none like this, but thanks

[@2012shogun]

What model of welding machine you have there

[@suburbanbiology]

Link in description.

[@jiggilowjow]

smart!!@!

[@suburbanbiology]

Thanks!!

[@tedlee5593]

Try to include metric measurements as well

[@kenjackson5938]

$14,000 holy crap!

[@suburbanbiology]

Yeah it’s sadly expensive. Even more now than when I got my used model.

[@jordanmcleod6778]

Why not use switchable magnets to secure the vises? That whole table is metal and you could mount the vises in any orientation instead of only in one plane. Edit: a word

[@suburbanbiology]

Good point. The only problem is that the magnets would accumulate metal shaving dust. But I supposed I. Like switch the magnets off intermittently to clean them. Thanks!

[@jordanmcleod6778]

@@suburbanbiology You're welcome.

[@theyellowarchitect4504]

Chad

[@Landee]

Is it a robot or your dog ?

[@suburbanbiology]

DJI dog 😂

[@burb138]

Yaoooooo

[@burb138]

The vice plate is great!!!! Thanks for your time on this video. Hope to see more projects

[@ryzingyou3444]

Only 434 likes in 3 weeks? Something's wronge...

[@suburbanbiology]

It seems the world may not get as excited about workbenches as I do??? 🤷🏼‍♂️ thanks for commenting!!!!

[@jacobbrizammito7187]

Down with code compliance. Should be your property rights to have scrap metal pile on your property Unless its a public safety concern (fire, rodent, mosquitoes,)

[@desireeenglish-spencer2562]

Codes sucks...

[@suburbanbiology]

lol. Agreed!

[@gabrielgomescunha]

You lost me at WELDING THE CASTERS 🤦

[@suburbanbiology]

Was it the welding part? It’s pretty quick to pick up if that’s the concern.

[@gabrielgomescunha]

@@suburbanbiology why would you weld casters and not weld a plate with 4 holes and screw the casters to it like an adult?

[@chuckclark9464]

I have a question for you, sir. Are you a welder by trade or no? The reason I ask is I have a welding project I would like to try to get done or something made and I’m looking for someone to do it and I can’t find anybody and the project I saw the guy who made the project, never answered my question about selling the project and if he ever sold products and they don’t even talk, they’re doing things and they keep showing the same videos over and over and over again to honest with you what I’m trying to do what he did was, he traced his hand And he made an act out of it and I live with my daughter and her boyfriend and he chops and I’m trying to make an act like to have an act like that made her a goof so I can say while you’re chopping wood I’ll give you a hand lollet me know if you wouldn’t mind sincerely Chuck

[@Christian6.1803]

Thank you for not leaving the raw, unttenuated sound of your angle grinder in video. Angle grinder noise is ruining 90%of the KZbin I watch. Subscribed.