2011-2023 Chrysler 300/Dodge Charger Oil Filter Housing/Oil Cooler Replacement How-To

[@KendogAdames-hy6mc]

THANK YOU! Your guide was so detailed and perfect. I was able to do the job myself and save me a 1k repair cost. People like you are what make KZbin great

[@BLUECOLLARGARAGE]

Thank you!

[@kingcaddi44]

I 2nd that brother! Thank u!!

[@joshuahernandez373]

Hey brother you did great you saved me so much money. Thank you!

[@alexanderlaguna4580]

What tools did you need to do this what is that star looking ine called

[@carolynleigh4254]

WOW, the video is thorough, but I don't think it's a job for a female to handle, so I took my daughter's Chrysler 2016 300C to Precision Tune. The cost to change the leaking oil filter is $1200. Would that be correct? Thank you!

[@REALZmedia]

Just completed this project with the assistance of my 12yr old daughter. We followed step by step and got ‘er done! I’m not a mechanic and was prepared for the worst. I legit made peace we might have lost our vehicle for attempting this project. Car starts. Runs GREAT. No delay in throttle as it was before. Not sure all that was effected but I can definitely feel the performance difference. My baby’s back 🙏🏾😊🌟🏆 Thank you for the time you put into this and the easy-to-follow instructions bro. I watched a few other videos on this but didn’t give me the confidence to attempt it until I came across your video the morning I decided to take the car in. That’s how clutch it was for me bro. I watched it 3xs taking notes lmao Commented that day and took it apart yesterday. Put it together today and boom we back in business. You saved me so much money I really couldn’t afford to spend rn. Thank you fr fr and wishing much success to you and your family. Definitely getting a Christmas card lol

[@BLUECOLLARGARAGE]

Thanks brother I appreciate it! You know it’s comments like yours that keep me motivated to continue doing videos like this. Just knowing I was able to help someone out like that is awesome because I’m not saying all repair shops are shady but there is a lot out there and it’s all about the money anymore and they like to take advantage of people.

[@hkiceca]

I checked the cooler 2 years ago. It did not leak at the time. I replaced the seals since I had them on hand. I just replaced the filter cap because one of the 4 tabs holding the bypassing valve was broken. The old cap is still available to function, but I like to replace it. I have been concerning the cooler failure. For a 8-year-old caravan, I am still not able to make a decision to pick the Mopar one or after market one with aluminum housing if the time comes to replace the cooler because the Mopar one is $225+tax CAD with sensors and Dorman will be over $300 CAD without sensors.

[@sabrinaingallina271]

real, lol me right now im about to attempt it to and i made peace if I loose my car

[@REALZmedia]

@@sabrinaingallina271hope you got it! Was not an easy task but definitely doable step by step via video. 🫡

[@jamesoberg8809]

Great video! I did this job on my 2015 Dodge Caravan in January 2024 and used the Dorman unit. It is now made in Malaysia. Also did all 24 rocker arms as a click just started. No cam damage. That was a big job! Took almost 10 hours.

[@bunnykimmons8674]

The best break down video installation without all the unnecessary talking.. keep posting GREAT videos

[@ivanvillarreal679]

This was one of the most detailed videos related to this job that I’ve found. I used it for my 2015 dodge charger sxt and it was spot on. Thanks for posting!

[@niftythrifty2121]

Loved having your help every step of the way. Everywhere I looked everyone said this job was really difficult if you hadn't done it before but you made it pretty easy. And fun! Thank you!

[@MegaFireball23]

All instruction videos should be like yours. I purchased the same oil cooler and it was like you were right beside me (doing it for the first time. And your camera angles were perfect… Thank you…

[@Lion_Rey]

I agree!

[@Now_Or_Neva]

This is the best video that I've ever seen on KZbin. Full detail, full video, full everything. And actually I'm about to go out and do my spark plugs and coils and change the oil filter housing. So your videos are just what I've been looking for and you're about the only one that makes them very clear and has so much detail. Thank you!‼️‼️‼️‼️

[@kathyb.4327]

You’re the dad we all wish we had. Tbh I got a little sad when the video/job ended. I rewinded and played and paused then played again, so many times, that I started wishing you were my dad. 😂❤

[@glock40armor3]

From a Airline Mechanic to you Sir, A fine job you have done !

[@PirateMTH_ToddH]

This is a GREAT how to video. It was produced well (video, commentary) and full of useful instruction. I will be replacing one of those silly plastic parts in the coming days. This video will be my instruction manual. THANK YOU for your work and for sharing your knowledge.

[@MoparDan]

Thanks Blue Collar Garage for this helpful video. I’m going to be doing this job carefully myself on my ‘12 Chrysler 200 Touring convertible because I don’t want to take chances with someone else’s workmanship or pay the Chrysler stealership a huge amount of money that I can’t afford. Goddamn Chrysler for making this part out of plastic! For whoever reads this comment there is another improvement offered by Baxter Performance that converts the Pentastar engines to a spin on filter. This helps eliminate momentary dry starts by keeping oil available to the cam areas which over time can cause wear with each starting of this otherwise well designed engine.

[@krow7402]

My guy, you just saved my life. This video is incredible. The water jackets on my stock cooler were blown through, I had water and oil pooling on top of my motor, down in the valley. I thought it was over, I thought I was done for. Followed your video step by step, you called out the bolt and nut sizes through the whole thing, you're a dang life saver dude. I absolutely do not have the money to pay a shop, you made this so simple. Thank you thank you thank you. Edit: Upgraded to fully aluminum part, which it should have been from the factory. Can't believe how much of it is plastic.

[@BLUECOLLARGARAGE]

Glad I was able to help.

[@scottgraber3373]

You have definitely done this a few times Pryor! Well done!

[@lalitchaudhary4376]

Thank you . I did everything as shown in video. But i got now check engine light with code P0441 ? I check all the connectors so what you think whats the problem now in my car?

[@BLUECOLLARGARAGE]

That is usually an issue with the evap system and could be something as simple as the gas cap not sealing properly. Have you tried deleting the code to see if it comes back?

[@lalitchaudhary4376]

@@BLUECOLLARGARAGE i delete the code it come back after 2 days

[@reddyfreddy]

Check your evap connections and the plug for the valve.

[@GlenHyden]

2017 Charger sxt 3.6. worked perfectly! Thanks so much. One goof I did was I have a different fuel line plug that I didn't fully "click" Thought I did. But no. Gas sprayed all over the engine. Massive clean up in the vally a second time.

[@BLUECOLLARGARAGE]

Sorry to hear that but thanks for letting us know that some models may have a different fuel line connector

[@christianalejandroflores8501]

These video series for Chrysler 300 are gold!! I did myself the replacement and upgrade of the oil cooler, thermostat/coolant pipe and led headlights almost two weeks ago. I saw the oil cooler replacement video several times, the process looks more intimidating in video than in person. I took the opportunity to replace the coolant reseirvoir since the antifreeze was drained. One thing that happened to me is that the A/C did not work after finishing the work, I needed to replace the fuse 12 A/C clutch. My car is a Chrysler 300 2015, these videos were very helpful. I am planning to replace my coils and spark plugs in the next months. Thank you so much!!!

[@MarcoJimenez-q8c]

Thank you brotha. I needed to do all this to my 300 this is by far the best descriptive video on how to work on your vehicle. Thank you

[@brandonmartinez4001]

Can I ask what was your issue with the 300 I ended up finding oil in my coolant reservoir and I’m hoping it’s not a blown head gasket

[@jrrodriguez199]

Seriously best video out there for this. Very detailed and easy to follow! Thanks!

[@davidandchristyreeves1876]

Great video. But I missed a step. I didn't drain the coolant. 🤦🏼‍♂️ So, when I lifted the housing out there was a lot of coolant. I submerged the two sensors underneath. They look waterproof but I don't know for sure. Do they need replacement?

[@BLUECOLLARGARAGE]

You should be totally fine if those sensors got submerged they are made to exposed to moisture.

[@Matalvatz]

Thank you for this video. This is the most in depth step by step one out there and it was easy to follow. The biggest trouble I had of all things were electrical connectors. I have weak hands maybe?

[@BLUECOLLARGARAGE]

Thanks bud, no it’s not just you, there have been times where I’ve spent 30 minutes trying to get simple electrical plug undone 😂

[@DarkMessiah499]

Thanks!

[@BLUECOLLARGARAGE]

I appreciate the super thanks it definitely helps to keep this channel running.

[@DarkMessiah499]

@@BLUECOLLARGARAGE it's only fair. You gave me help and great ideas!

[@brendanthorpe5525]

Thanks! Just did mine by following your video. Broke the rubber grommet for the air intake duct support leg....Didn't realize you just pull straight out on the assembly. For anyone reading this it is another plastic pin with a ball end. The rubber grommet that just snaps over the ball. Just like the ones on the top engine cover....

[@BLUECOLLARGARAGE]

Thanks for the tip

[@campingtree102]

Quick question, do I need to drain the oil before I take off the oil filter housing and how urgent is it to replace if you see a bit of oil?

[@Victorarmendariz-y2x]

Thanks man this video actually guided me the right path I give this a 100

[@eldhosesalby8320]

Hey do i need to drain complete coolant fluid and the engine oil before starting doing this work?? Can you please guide me?

[@BLUECOLLARGARAGE]

You will definitely want to drain some of the coolant down because if not it will get coolant everywhere once you disconnect the coolant lines from the cooler. The oil doesn’t have to be drained but I highly recommend draining both for good measures.

[@Primeros1000]

This video is great with all the torque specs. Tanks you really really helped me

[@tomturnipseed2541]

Thank you for the very detailed video on my 2012 Chrysler 300!!!

[@charlesromney]

I need to this procedure now in my Jeep GC, which one do you think now was better ,the SPK or the Doorman?

[@BLUECOLLARGARAGE]

I’d say the Dorman. Plus the Dorman is made in the USA

[@manpreetmultani7399]

Thanks you. Your guide is awesome I want to know which socket you use to remove E8 bolts, 8mm?

[@BLUECOLLARGARAGE]

I just use a e8 socket such as this amzn.to/49gkefD

[@manpreetmultani7399]

I did everything but forgot to take air out after filling coolant and drive around 100km what should I do now ?

[@randungs]

By far the BEST video out here! fully explained and detailled

[@armandogutierrez7191]

This video was very, very helpful. Thank you, bro.

[@REALZmedia]

Appreciate your video you’re saving me $700 in just labor costs. Tbh if I had the money I’d rather take it in lol but I’m also happy to learn and save money so thanks again.

[@brianbaker5081]

Great video with detailed step by step instructions.

[@BLUECOLLARGARAGE]

Thank you!

[@mkm44]

Great tutorial you’re a natural at this.

[@BLUECOLLARGARAGE]

Thank you so much!

[@lordleatch]

Thank you for this video saved me over 1k in repairs

[@jeffersonc3455]

this was a great video, if I am doing the spark plugs I am inclinded to replace the oil filter housing as well.. you didn't cuss once. my projects never go this smooth. 🤦‍♂🤦‍♂🤣🤣 my 2018 charger hit 100k and I believe in preventative maintenance. like and subscribed.

[@BLUECOLLARGARAGE]

It doesn’t always go this smooth, there’s a lot of things I say off camera 😂 but I have to keep it family friendly lol.

[@DefientEnt]

Changed my spark plugs from your other video! Thank you for making it easy! I got my oil changed today at the dealer (I always do every 5k) and they showed me oil around the filter housing. After watching this video I'm going to change it myself in the next few days. Question: Will I need to change my oil again since I just got it done? Thank you

[@jordanbarker7462]

What kind of bit do i need to buy to remove oil filter housing

[@EpicChubs05]

Thank you very much for the great detail helpful videos! Definitely helped me alot working on my sister's Charger

[@dcavalli9]

I drained the radiator, but some left over coolant keeps coming up from the holes at the bottom of the engine bay and spilling over. It's not a flood like it was before, but more of an annoyance. Is this normal? Should I just soak up the coolant in the holes and then install the new oil filter housing?

[@BLUECOLLARGARAGE]

Yeah that’s normal there will still be coolant in the engine block the only way of getting all that out is by pulling the block coolant plugs. Just soak it up and install the new filter housing and you’ll be good.

[@TheLocknLoadChannel]

Nice video! Where did you find the torque specs. for the upper and lower intake bolts?

[@BLUECOLLARGARAGE]

Thanks, I have the factory repair manual that shows all the specs.

[@TheLocknLoadChannel]

Ok thanks, i was looking for torque specification for my 300 and having trouble finding them. I will need to get a manual.....thanks again brother!

[@masoud-tekken365]

Can you use a StP 10k miles oil filter with this aluminum oil housing?

[@BLUECOLLARGARAGE]

No according to Dorman there’s only a handful you can use Hastings, denso, wix, and purolator.

[@masoud-tekken365]

@BLUECOLLARGARAGE I also see Fram on oil cap...am I missing something? I bought that one was available at Walmart.

[@DarkMessiah499]

Quick question, I did this last summer. If I recall, there was coolant in that valley, as well as oil. I'm chasing a p06de and Im trying to find a coolant leak. I know the coolant is leaking from the smell of coolant when Im running. Did you have the coolant pool at all?

[@BLUECOLLARGARAGE]

No I didn’t have any coolant pooling up. Did you check the thermostat housing and coolant pipe coming off that? Those are two common areas that leak. Can you take a flashlight and see if any coolant is pooling up under the intake? As for the p06de I believe that is an oil pressure issue. Does it have any running issues and how many miles are on it? Hoping it’s not an oil pump issue. I’m wanting if it’s an issue with the pressure sending unit and if the coolant smell has something to do with it to where the coolant corroded the oil pressure sending unit connector. Do you have any way of testing your oil pressure?

[@DarkMessiah499]

@@BLUECOLLARGARAGE 170k. I replaced the plastic thermostat housing with an aluminum one. I put dye in the cooling system and the only bright spot I saw was on the bolt coming up out of it. No evidence anywhere else beside the smell, coolant loss, and coolant temp going up towards 260. The reason I got here is I got the p06de code, and went ahead and just put it an oil cooler I had rather than just change the pressure sensor. It runs fine. But the check engine light was driving me insane (I'm weird like that. I was working thru a checklist for that code. Last July I got an oil change and the problem cleared up. I check the oil and yet the tech said I had been down more than a quart and a half, despite the dipstick always reading over filled. I guess I'll do an oil change and see if the code clears. I'm curious if there's an issue with checking the oil level. But excluding that, it's gonna be the pump itself, which includes the solenoid. I appreciate you taking all the time to answer. Oh, and other than the car's gauge, I don't have the means to verify the exact oil pressure.

[@heythere6983]

I wonder, if there is a leak , can putting one of those liquid Products that seal leaks in the engine work for this aswell?

[@agustinguzmanpachecoenriqu3945]

Do I have to drain the coolant and oil prior to starting the job? I have to do it on my 2017 300

[@BLUECOLLARGARAGE]

You don’t have to drain the whole cooling system but you’ll want to drain out at least a 1/4 of it that way it doesn’t make a huge mess when disconnecting the coolant line from the cooler.

[@malachikidd6592]

If I strip the bolt that bolts down the oil cooler how bad of position am I in ?

[@xoelsteppa1216]

my oil life shows up as 0% is that ok or do i need to redo , maybe the sensors on the new piece are off?

[@BLUECOLLARGARAGE]

Did you try resetting your oil life?

[@ranchotresmarielas5582]

Can that oil go dripping all the way down to the engine where the transmission is located ?

[@BLUECOLLARGARAGE]

Yes especially while parking on an incline like a driveway. The cooler is located in the valley of the engine and the oil slowly works its way towards the back of the engine leaking down the transmission bell housing making it look like the transmission is leaking.

[@kathyb.4327]

Do you plan on doing a video on how to change rockers/lifters in the 3.6L Pentstar engines? I bought the rockers so I could change em out during this job but I didn’t do em cause I didn’t like any of the tutorials by other people that were out there. There’s just something about how you do these jobs. You make the jobs doable and your videos are so perfect to follow along with. You have a way of instilling the motivation and self confidence that’s needed in order to get the job(s) done. Also, any recommendations on getting the petcock/radiator plug back in? It came all the way out when I turned it. I just went a bought a new one just in case I damaged the one that came out. I am really struggling to get the plug in rn. It’s the only step I have left to do (besides putting the new coolant in).

[@BLUECOLLARGARAGE]

Unfortunately I don’t have a video on that right now but I’m sure I will in the future seems how that is a common issue on these motors. My daughter actually sold her Chrysler 300 so I’ll have to wait on a customers vehicle to do this. The radiator drain should just kind to of snap in and then screw in.

[@kathyb.4327]

@@BLUECOLLARGARAGE customer? Where might your shop be? Lol. I’d gladly pay you to the annoying ticking. ☺️

[@BLUECOLLARGARAGE]

I’m all the way in Colorado

[@86twin]

To get the petcock you push in then turn. I found out that worked when I changed my thermostat

[@Cowboy340]

Follow up question and concern I had a shop replace the oil filter housing last week, car ran fine for 30 miles, my wife parked the car, next day it wouldn’t start, turned over, never started. Heavy fuel odors. Any ideas? Thanks

[@BLUECOLLARGARAGE]

I’m wondering if they didn’t get the fuel line that feeds the injectors all the way clicked in. It’s in the video at 43:41 or I wonder if they reused the plenum gaskets on the lower intake instead of replacing with new. Is there anyway you can take off the engine cover and reach around the back of the intake and find that fuel line and just give it a pull to see if it comes loose?

[@Cowboy340]

Thank you for the heads up. After reviewing your video again I contacted the shop and had the car towed to them. Yes, the fuel line clamp you mentioned to be aware of had not locked in place well enough therefore it was leaking badly. They discovered that to be the problem as well. Pick it up tomorrow. I really want to thank you for the time you take to communicate with your followers. How’s your daughters military career going in Alaska? Hopefully well. Does her Chrysler get her from A to B safely up there? Again, thank you Merry Christmas to you and your Family

[@BLUECOLLARGARAGE]

@@Cowboy340 No problem I’m glad to hear they got it figured out. My daughter is doing good even though her 300 was AWD she sold it not to long ago and bought a Subaru lol. Same to you hope you have a Merry Christmas and Happy New Year.

[@Aventuroo]

Do you have to drain the coolant

[@BLUECOLLARGARAGE]

You don’t have to drain it all out but you will want to drain enough out to where it drops past the oil cooler lines. If not once you disconnect the cooler lines it will make a mess with coolant everywhere.

[@onziahtramer2856]

Awesome ty,I just did this exactly like how you show step by step would’ve taken me at 1 1/2 hours but couldn’t get sensors off uuughhh but good video

[@mikepuk8224]

I had to tap my old filter housing out with a 10 LB hammer just for it to come out. From Mopar to Dorman for me ! Pain in the back to assemble but worth it in the long run !

[@americodelgado2454]

What torque wrench you use

[@BLUECOLLARGARAGE]

It's just a Husky from Home Depot

[@americodelgado2454]

1/2 Inc??? Any attachments to it and thanks

[@BLUECOLLARGARAGE]

@@americodelgado2454 3/8”

[@DannyClem-z5c]

Great video, you were so detailed with every step.

[@patfalcone3933]

Great vid very clear directions once the Texas heat cools down going to tackle this job.

[@oscarpuentesvargas650]

Awesome video !! Do I still have to change the oil after replacing the Oil filter housing? I just did an oil change 2 weeks ago… I will be bleeding the coolant tho

[@nokapmar8501]

Do I have to use mopar coolant or can I use a different brand? If so can I get pre-diluted as well

[@BLUECOLLARGARAGE]

No you can use any brand that is recommended for Chrysler zerex g30 is the same stuff and it’s pre diluted amzn.to/4ch28gj what ever you end up using make sure it’s the OAT (organic acid technology) formula.

[@james6275]

Great video getting ready to do my 2019 Grand Cherokee 3.6. So overall you changed coolant, spark plugs and of course engine oil, how long did it take you start to finish? Thank you

[@ineedfiles]

I noticed the black puddle the other day. I’m just wondering why the aluminum replacement part seems to be cheaper than the plastic one?

[@BLUECOLLARGARAGE]

Yeah not really sure why that is and I don’t know why Mopar hasn’t come out with a aluminum replacement. Probably so they can continue to make money off of this knowing the plastic one will eventually fail.

[@kid5042]

Actually in the 2018 or 19s and up this problem was actually fixed

[@Ty-nb5mi]

@@kid5042I have a 2019 and its leaking

[@Blessed300.]

Why did you have to use the old sensors?

[@correfe]

can you use teflon tape instead of sealent?

[@Cowboy340]

Very comprehensive, great camera and audio as well. How much shop time is expected for these combined functions?

[@BLUECOLLARGARAGE]

Not sure how many hours shops usually charge but I’d say around 4hours or so.

[@Packemout88]

If you don’t drain the coolant will it be around the oil filter housing ?

[@BLUECOLLARGARAGE]

Yeah unless you can shove a bunch of rags around the cooling lines to soak up the coolant when you pull the lines.

[@Cowboy340]

Do you have the Amazon item code number for the SKP Rock Auto oil filter housing and cooler? Thanks

[@BLUECOLLARGARAGE]

Haven’t been able to find the skp version of it on Amazon you’ll have to source it through rockauto.com but here’s the part number for it sk926959.

[@georgepirtle1987]

This is top notch!! Greatly appreciated.

[@BLUECOLLARGARAGE]

👍🏻

[@dylanrobert2014]

Is it worth buying new sensors when doing this project or is it okay to use the existing ones? And if so, would that require any new programming with new sensors?

[@woodybear8298]

Going to be doing this on my 2018 Durango. Great video, thanks.

[@jorgevacio7162]

After replacing this part do you recommend to do oil change

[@BLUECOLLARGARAGE]

Yes I always do an oil change afterwards just in case and coolant got mixed in.

[@djTolse]

Hi, Which is better, the original plastic or aluminum?

[@BLUECOLLARGARAGE]

Aluminum

[@nola4130]

What are the problems that result with the oil filter housing needing to be replaced? I have a friend to said the mechanic said their was oil in the coolant, but the head gasket was not the problem. Thanks.

[@Lilrudy777]

How much do shops usually charge for a replacement

[@BLUECOLLARGARAGE]

Dealerships usually charge about 1k-$1200. To do this job.

[@junedogg09]

Yep, just paid $1083 today.

[@deriniece1]

Hello, do you have to drain the oil also? When you change the filter housing?

[@gktop5430]

Do you need to empty the coolant housing or was that just part of the tune up

[@BLUECOLLARGARAGE]

You will want to drain about a 1/4 of the coolant out so the level will drop below the oil cooler. If not you make a huge mess with coolant going every where once you remove the lines from the oil cooler.

[@gktop5430]

@@BLUECOLLARGARAGElearned that the hard way lmao I tried to drain my coolant but nothing was coming out when I would flip the switch so I just decided to yolo it and got coolant everywhere 😂

[@franciscocv1995]

Do i really need to drain all that coolant for the oil filter housing?

[@BLUECOLLARGARAGE]

You don’t have to drain it all the way but you want to drain at least a 1/4 of it. If not it will make a pretty big mess when you pull the coolant line of the cooler.

[@Mopar3.6LV6]

Wow. Thank you Thank you Thank you for posting this amazing step by step video. I’m looking to tackle this repair soon. I think I see some oil but not sure if I maybe spilled some when I did my last oil change or maybe I over tightened the oil cap and cracked the housing. Going with the Dorman as well. I’ll have to get a new torque wrench for in lbs. the one I have only goes down to 20 ft lbs. I’ll also have to get a set of Torx E since Torx T won’t work on those bolts for the lower intake manifold. Also planning to do the spark plugs while I’m in there. Car currently has 66k miles so they still have a ways to go but don’t wanna have to do this again u less I have to. Again, thank you for this video.

[@lightcapmath2777]

Where are the links to the spark plug and coolant bypass videos? I would really like to see them. Best DVD:)

[@bernicearanda2198]

I had it installed 2 weeks ago and again their is oil in the coolant container. Why is that? Please help.

[@Cowboy340]

Outstanding. Thank you. Are you satisfied with the Dorman unit overall?

[@BLUECOLLARGARAGE]

Yeah no complaints so far. Best part of it was that it’s made here in the USA except for the orange cap which is made in china.

[@Ibrahim99990]

great job thank you for sharing, why not changing the O ring only (gasket)?

[@BLUECOLLARGARAGE]

Thank you. This is my daughters car and she moved across the country so I just wanted to make sure she had no other issues. If she didn’t move I probably would have just got a gasket kit for it.

[@soiceyboy33]

Did Chrysler fix the oil cooler design in the newer 2021+ models? Or do they still use plastic ?

[@BLUECOLLARGARAGE]

Pretty sure they still use plastic. I seriously think Chrysler does this on purpose just so you bring it back to the dealership to be repaired so they make more money and try to up sell you on other things at the same time.

[@soiceyboy33]

@@BLUECOLLARGARAGE that’s terrible. This is exactly why people think American cars are junk. They would rather keep their service department busy than improve their reputation and increase sales in the future smh

[@franklinfrancisco4476]

What kind of torque wrench do you have ?

[@BLUECOLLARGARAGE]

It’s just a husky one from Home Depot.

[@edgarfileto]

Thank you! I’m doing this job this weekend! I have a question, did you drain the engine oil before hand? Just trying to get everything dialed in. Thanks again!

[@franklinfrancisco4476]

Or where did you buy your torque wrench bar

[@BLUECOLLARGARAGE]

It’s just a 12” 1/4 extension.

[@lorenzopalacios3640]

There’s no problem if you re used the sensors ??

[@BLUECOLLARGARAGE]

You can reuse them with no issues.

[@DJJayVybezakaJavier]

Is draining the coolant a must?

[@BLUECOLLARGARAGE]

Not a must but you’ll want to drain out at least a 1/4 of it so when you pull off the cooler cooling lines it doesn’t make a huge mess

[@Mike_44]

Is it possible to do this job without removing the coolant? At 52k miles, I need to do this job on my ‘19 Pacifica. I have been doing research on the forums, and many folks complain that the Dorman aluminum unit “has defects, it’s not up to spec compared to the oem one”, etc. There seem to be many Chinese Amazon copycats now for 1/3 of the Dorman unit. What do you think?? Thank you for this video btw!

[@drsauce05]

Excellent job brother. You definitely give people the will to start the job. Wish I had you around for the rocker arm fix on this engine aka “ticking”.

[@BLUECOLLARGARAGE]

Luckily the ones I have worked on haven’t had the infamous rocker arm tick yet but I’m sure it’s just a matter of time and I’ll end up doing a video on one lol.

[@dw89b]

Why did you go with the Dorman? Do you know anyone who has installed one in the past?

[@BLUECOLLARGARAGE]

I went with Dorman because they offer it in the full aluminum plus it’s made in the USA. Don’t know of anyone else who has installed it because it’s kind of a newer product to help solve the mopar plastic housing failures.

[@g-baby251]

I’m having trouble. My o ring keeps leaking after a week or two

[@MartinPerry-j8g]

Thanks! Excellent Job! I need to do mine, now!

[@CalloftheCrow]

Great video brother! How long did the job take you if you don't mind me asking?

[@BLUECOLLARGARAGE]

If I wasn’t recording probably around 2 hours or so.

[@mannyv404]

Hey man good video I replaced the oil cooler a couple days ago, I noticed that my oil temp was getting to 220ish is that normal? And not sure what caused it but oil came out of oil filler cap. What could I have done wrong to cause that? Thanks

[@giovanimiron]

Question. For the oil filter housing did you remove the oil from the engine to remove the oil filter housing or it’s okay to remove the housing without having to take out the oil

[@premiummelons1512]

The oil collects at the bottom in the sump, so you can change this without changing the oil, but its probably recommended that you do so anyways

[@jhonrubio0202]

My oil filter cap won’t fit cause is touching with the lower intake , what am I doing wrong ?

[@wilfredjaime1130]

quick question did you have to drain the oil to do this job .

[@BLUECOLLARGARAGE]

You don’t have to but it’s always a good idea to do it after just to make sure there’s no contamination or coolant that ends up in the oil.

[@dkmoreno3]

I definitely over torqued a bolt on the housing unit and idk if I stripped it but we will see I hope I don’t leak

[@BLUECOLLARGARAGE]

Any leaks so far?

[@dkmoreno3]

@@BLUECOLLARGARAGE it’s been a few days and I don’t see anything yet. I will keep checking though

[@BLUECOLLARGARAGE]

@@dkmoreno3 👍🏻

[@E-Baby3814]

Do you have to change your oil when doing the job?

[@stevee7634]

What brand of tourqe wrench are you using?

[@CarterNieman]

I ordered the same part and it tells me to twerk down the pieces to nine and 12 foot pounds should I listen to that or do the 112 pounds?