NAPA!!!! FOR THE LOVE OF HOLY GOD SPONSOR THIS MAN. Please. This man is a national mechanical treasure.
@ahmadghosheh31043 жыл бұрын
Amen
@folcaljet003 жыл бұрын
Truth
@johnmehaffey99533 жыл бұрын
Problem is that they get plenty of free advertising with Eric O, only way is for everyone to say we’ll use their competitor for out stuff unless you sponsor mr o
@jdrs42143 жыл бұрын
Yea Napa!!! Sponsor him!!!! Jeeeez!!!
@ironllama83043 жыл бұрын
But they get the benefit without having to supply the parts. If Eric didn't mention them, he would prob be sponsored already
@aku2dimensional3 жыл бұрын
"If it don't feel right, stop." Words to live by, with a number of different applications.
@bertgrau92463 жыл бұрын
So true!!
@robertgary35613 жыл бұрын
But with plastic stuff it’s hard to know.
@robertgary35613 жыл бұрын
My dad used to tell me “don’t force it son”. He died when I was 10 so that’s one of the memories I kept. Good advice.
@lotsofthisandthat97912 жыл бұрын
@@robertgary3561 May your Dad RIP and he watches over further repairs and projects you do. God bless you and your father.
@MacAutoDiag Жыл бұрын
*doesn't
@jacobschlais83513 жыл бұрын
After watching many SMA videos “come on baby” is now a part of my wrenching vocabulary.
@tomctutor3 жыл бұрын
Customer stands watching her mechanic working on her car: 유 웃⌥⊗回⊗ Opens the hood, "There's yer problem lady..", "I'll just get the persuader on it" "Come on baby!", "Get in, giving it some Ugga Dugga", "Now some Napa grease, stop the weeing", "Smoooooth", "Ship it!".
@MrPikeRider3 жыл бұрын
I've adopted "for poop and laughter"
@r.b.l.58413 жыл бұрын
SMA - glossary of common automotive technical terms: Little Fella Woooooha! Donger Panther pee sprintz digits Big-Nasty Come on Baby SMA - common expressions: Torqued to Factory Spec's! Plan the work, and work the plan Just cause it's new don't mean it's good Don't be a parts canon junky, diagnose then confirm the diagnosis "Dramatic music" featuring Brake-Clean - everyone's favorite! We should have a link to common Mr. O terms and expressions!
@tomctutor3 жыл бұрын
@@r.b.l.5841 Money Light on
@GeminiSeven433 жыл бұрын
Mine Too!!! Would love to add "Sucky Sucky but that would not fly at work...LOL.
@gregorywills22313 жыл бұрын
I just drove past Avoca on Thursday coming back from a motorcycle trip. I thought for a minute about stopping by but did you a favor and kept on going.
@baldmaggots3 жыл бұрын
Oh that was you that honked, you're that guy.
@JohnSmith-kt3uy3 жыл бұрын
I'm sure Eric appreciates your decision!
@midik1233 жыл бұрын
Just did it today on a 2014 challenger. No light was on, but oil all over the cylinder valley...
@davidnull55903 жыл бұрын
Often by the Avoca exit you'll find the New York State Police and sometimes the Steuben Sheriff's running radar, there a lot of traffic from Buffalo and Rochester that's passing through the area.
@Dirtyharry705853 жыл бұрын
@@davidnull5590 cool now visitors can show both dark and light sides of the moon.....
@cquay33 жыл бұрын
So my wife says " you already have a scraper". But I told this is a special scraper. Eric O uses this scraper.😂😂
@brandenmulhollen11553 жыл бұрын
Not gonna lie. If Eric uses a certain tool and it’s used in one of the jobs I do.. chances are I’m buyin’ it! Guy knows a good tool.
@nickmckenzie80343 жыл бұрын
Mine said after looking on Amazon who do you know in New York that you sent something to? She’didn’t understand when I told her uncle O the best source of information and teacher I ever had lol
@409novaman3 жыл бұрын
Wait. Your wife knows what scrapers you have in your tool box? Oh boy...
@cquay33 жыл бұрын
@@409novaman no. She just says that about any tool I want to get.
@paulkleinschmit98713 жыл бұрын
Carbide scrapers are pretty badass. Lisle makes them in two different widths which is really handy.
@JackGiralico3 жыл бұрын
Gotta get a "Come on, baby" T-shirt in the merch.
@Teknyk3033 жыл бұрын
I 2nd this
@robertgary35613 жыл бұрын
There’s your problem lady.
@Teknyk3033 жыл бұрын
@@robertgary3561 that too. I'd buy both lol
@nelsonmcclure1413 жыл бұрын
"Whoa fella"
@rogeryanez81073 жыл бұрын
For real
@TommyAGAU3 жыл бұрын
"He's a good egg, as far eggs run. But then again who likes runny eggs." Classic Eric! Love it.
@stevenkoch86322 жыл бұрын
I am on a 2015 Jeep Wrangler 3.6L replacing the oil filter housing as well. I am a rookie tech but learning fast especially when I watch your videos because you know how to explain everything where I can understand it. This is my 1st oil pressure housing on this vehicle and I ain't going to lie, I was very overwhelmed by the job and had to leave it to finish it in the morning so I can verify everything and I see now what I should've done in the 1st place but don't have much guidance from my other 2 veteran techs so I learn everything on my own almost having to refer to all data or your videos or learn the hard way and take way too long on a job. I get quicker and quicker but have alot to learn. Thanks for taking the time to do these videos. I probably wouldn't learn the right way if it wasn't for your videos.
@mondragon92823 жыл бұрын
"If it doesn't feel right, STOP" The best advice for anything in life.
@mikedurnell3 жыл бұрын
Fix it again Tony
@mikedurnell3 жыл бұрын
Take a can of tannerite and put it in the seat ready aim fire
@dlewis97603 жыл бұрын
Neutral Drop. Heh. I've left comments that they ought to take one of those cars and drop it outside of your place over the weekend with a "Dear Eric. The car was running fine, and now runs funny" note.
@SMurphyMadness3 жыл бұрын
I didn't watch this video--but for all who must know--my napa rep recently told me they had an updated housing! No more plastic! This, of course, comes mere weeks after I changed a housing on a Grand Cherokee for a customer. Eric--Keep it up! You're a rare breed.
@busslayer47903 жыл бұрын
I had a similar leak from the oil filter assembly ony Kia van. Unrelated to the leak, I had completely stripped the plastic nut used to loosen the filter top so I have just been using a big Channel-Lock. When I picked it up from the dealer after the assembly replacement, the tech wrote "22mm" in big letters on top of the assembly with a paint marker. I felt like I was being scolded. 😄
@satamanschmidt34283 жыл бұрын
You were.
@markchidester62393 жыл бұрын
LMAO 🤣🤣🤣
@MoeBabaloosh2 жыл бұрын
😂
@JamesAgansАй бұрын
"Stripped" is not the same as rounded off. Lolol😂 Good Tech. Lolol
@snarlbug3 жыл бұрын
"We'll see if we can learn us a little on our own. That way if we make a mistake, we don't forget. Until the next time, and we make the same mistake." Truer words have never been spoken :-)
@davidbachy5627Ай бұрын
Great job! That dramatic sound effect with the introduction of the brake cleaner was dope!
@fubartotale33893 жыл бұрын
So, its the Chrysler that was in before. It's a Chrysler so it's going to have a recurring role in the Saga of S. Main Auto, you betcha!
@danielladd33912 жыл бұрын
Thank you very much sir!! I've been watching your channel for three or four years now and this video gave me the courage to replace my oil pressure switch on my wrangler. Not a job I want to do again any time soon, I made the best of it and changed the plugs too. You're a rock star and I appreciate your professionalism and willingness to help a regular guy save a buck.
@deserteagle22092 жыл бұрын
Did mine, took about 2 hours with 8 packs to go with, also replaced the plugs, it wasn’t difficult to do even for my skills, great engine.
@jorgefernandez-mv8hu3 жыл бұрын
That was a fine job on a heck of a design. Crazy place for an oil filter and cooler.Thanks for the tips!
@unclemarksdiyauto3 жыл бұрын
You made my day with the "brake clean" music!
@brucejones23543 жыл бұрын
THAT ALWAYS makes me Smile! ! !
@cesar639263 жыл бұрын
I love watching the south main auto channel
@steveo66313 жыл бұрын
It's amazing how many times a day at work I catch myself pleading - "Come on, baby....." And no, I'm not an obstetrician....
@larryehrlich572 жыл бұрын
I'm in my late 60's and my older brother told me to tighten the oil filter "hand tight". It's worked well for me in the last 40+ years...not a single problem either tightening or loosening the oil filter over all that time.
@jimjoyce45143 жыл бұрын
So when you're working on a car and not recording... do you still talk to us?
@SouthMainAuto3 жыл бұрын
You bet 😅
@Dirtyharry705853 жыл бұрын
@@SouthMainAuto hahaha bet our ears burn...
@akersjon2783 жыл бұрын
If a car engine starts up in the SMA shop, and the camera isn't rolling, does it make a sound?
@satamanschmidt34283 жыл бұрын
@@SouthMainAuto Having been there I know you can't work on cars without talking. My natural tendency is to prefer quiet when I'm working, yours is to chatter whether its to another person, a car or a wall, doesn't matter. For a guy that lives in the middle of nowhere, which is how I see it as I have always lived in a big city, you seem to hate peace and quiet. I find you country folks so interesting.
@johnmccallum85123 жыл бұрын
Talking to ones self is the only way to get a sensible reply sometimes.
@arthurhudgens8213 Жыл бұрын
I was tight for money when my oil housing failed on my 2014 ran .I rolled the dice on a Amazon knock off that came with an extra oil filter. I very carefully installed it and torqued it up to spec in steps it's been in there about 3000 miles .no problems so far wish me luck lol
@Blazer02LS3 жыл бұрын
For the DIYer, you can change the pressure sensor itself without pulling parts off, you just need an oil pressure sender socket and an extension, then work somewhat blind to swap it out. BUT if you also have a pre 2015 3.6 you might want to check it for leaks anyway. David has a good video on doing just the sensor swap. The aluminum unit is a Dorman and fits 14 and up. Looks real good but haven't installed one yet, have installed an aluminum coolant crossover assembly and it works real well to replace the plastic OE one.
@waltertiamfook662 жыл бұрын
Love the sound of proper air tools - old school all the way 👍yeah baby 😂😂
@Kevin-zo6nz3 жыл бұрын
Way more thorough cleaning that intake valley then I would have been. Good work. Cheers
@christophersmith9275 Жыл бұрын
I know, right?! Working on my 3.2L Cherokee this week and when dad stopped over for moral support, he said the exact same thing when he saw the swimming pool there in the valley.
@mmadden012 жыл бұрын
enjoy your video I am also a 32 year 18 year ASE master It’s a true pleasure watching a professional keep doing what you do best
@RolandG3033 жыл бұрын
Was great meeting you the other day when traveling through Avoca. Thanks for the shirt and glad to see the power is back on. Coincidentally I drive a 3.6 Wrangler JK! Thanks again, Patrick
@TheNachris7203 жыл бұрын
Carbide scraper followed by the Red in color, Scotchbrite pad ( kind of like the roloc disc material)... cleans up aluminum perfectly! Roloc disc's are kind of harsh, but the scotchbrite square pads are perfect.. I've found this out and havent switched back. Brake cleaner with it = love
@hella_23503 жыл бұрын
I can’t wait to watch the whole video. I did one recently, I wanna hear the uncensored version 😂😂.
@kurtkennedy53703 жыл бұрын
The all aluminum one is from your Fav. brand dorman! So far its been excellent
@rmproute662 жыл бұрын
The All Aluminum Dorman Housing is for the 2nd Generation Pentastar (2014-2018) Engine.
@PaulysAuto3 жыл бұрын
I just finished one on a Jeep Wrangler last week with Radiator, timing cover reseal, pan, valve covers etc...I will do the vans all day, but the Jeeps are a PITA! Amazing how the traverse mounted platforms are so much easier. Great video as always Eric!
@zoticus12 жыл бұрын
Gotta love that giant battery tub you have to remove for the right cam cover, jeeps blow
@seahorse56773 жыл бұрын
God bless this man, working in these modern overhead cam engine bays is a nightmare. I would just walk away.
@sjvlogs91192 жыл бұрын
I really appreciate that you 99% of the time you take your time and do things right to make it easier for the next person or for yourself if have to work on the same vehicle again... Don't put yourself down you are a great person and mechanic... I wish we had good mechanics here in Alberta Canada... Most of them could give a crap less of what they do or how they work.... Thank You MR. O...
@fowlerk183 жыл бұрын
I'm always grateful for people with these skills in the world. I get frustrated after and hour of trying to put on my windshield wipers, much less actually opening an engine
@Balmy_Jones3 жыл бұрын
Me, a Ga Tech Mechanical Engineer, will not let others touch my cars. However, if I could find a mechanic like you - quality - (plugging ports and cleaning up the leaked oil w/ brake cleaner - nice. New gasket / diaphragm sets - nice.) I would have you or similar quality mechanic service my cars. Darn nice work.
@simcoespring3 жыл бұрын
Always great to see the other side of the mechanic world. It sure is weird seeing someone work up on top of a vehicle when I spend all day under them.
@stryker00403 жыл бұрын
I’ve been watching the channel for a while, absolutely love it. I just had my first encounter with this issue roll into my shop. Another shop (maybe 2) told my friend / customer he needed a new engine because it was burning oil. They showed him the oil saturated plug (cylinder 1) and everything. Well, from a look at codes and some digging into the common occurrence this has become - I have determined the intake gaskets are also no good. So the oil is not only leaking out and hanging out on the block like the rest of these, but it’s also leaking back in the engine via vacuum leak in cylinder 1! This thing ran horrible so he believed them! Swapped out the destroyed cats, plug, and runs great. Now moving onto the rest of the plugs and what started all this mess! Oh, and it’s also leaking coolant even faster than oil 🤦🏼♂️ Really glad I came across this before I ordered a plastic one, in hopes there really is an aluminum one!
@Sagittarius-883 жыл бұрын
These oil coolers are the gift that keeps giving. To say they're notorious for leaking would be an understatement. I've had jeeps with less than 10 thousand miles come in, the entire bell housing soaked in oil from the cooler leaking. When these things cut loose, it ain't a few drips of oil. They make an absolute mess. Good to see Chrysler hasn't changed the design, though. Job security, to say the least.
@mannypuerta50863 жыл бұрын
Note that an improved, more reliable and more reasonably priced option is to use a 2014 and up oil filter/cooler housing. Unfortunately, the newer version requires a different filter, which won’t fit the older housing. If the owner doesn’t do his/her own oil and filter changes, the unsuspecting mechanic is going to break something trying to make it work or run through a period of confusion until the issue is figured out. If you do your own work or have a mechanic you frequent on a regular basis, the 2014 and up improved filter/cooler housing is a better option.
@stevethemechanic79673 жыл бұрын
"Thanks for your cooperation" was one of my standard lines when deep into conversation with my many short term relationships during my forty plus years inviting problems into my life that I was confident or crazy enough to tackle....I just discovered your channel and have enjoyed watching you in your relationships...but I guess I get back at it.
@7binus93 жыл бұрын
Yeah baby, I love the longer vids!
@RCichard Жыл бұрын
I LOVE your channel man, if i lived in the area you would be my go-to shop for anything im not doing myself. You do awesome reviews, tutorials, and the narration to your videos is on point with a chuckle thrown in here and there just at the right time :) Im in the process of doing a complete rebuild on my 2018 Wrangler JK which has the same engine, and will say that i had a a pool of oil under the cooler as well. They are great engines, easy to work on, easy to get parts for, and tons of info on the net.. but was fun seeing ya work on it! Thanks for sharing, and keep that content coming, you will be a 1million subs in no time!
@mikesworld603 жыл бұрын
Eric, You always do such a meticulous job with great attention to detail. I can tell you are that way even when the camera is off because you take pride in your work and reputation. I work like you do and for the same reasons, but I have to admit I think it is sometimes because I'm kind of lazy and don't want to do a job more than once if I can help it. Of course that doesn’t always work out because even after doing the best job I can, I have to do it over because of the crappy aftermarket parts I am force to use sometimes. I always us OEM parts if they are available to try to avoid that. I have a Ford 7.3 liter Diesel in my F350 crew cab and you could literally drop your sandwich in there and still eat it because it is so clean. But why no one will ever see it except me.
@edwardmyers17463 жыл бұрын
Seeing Mr. Brake Clean made me very happy in this EP 🤣
@markmichlewicz51413 жыл бұрын
Perfect timing.about to leave work .go home eat dinner and watch a new video.
@jorgebravo62962 жыл бұрын
Thank you just replaced my oil filter housing watched your video through the process ☺️👍
@ShainAndrews3 жыл бұрын
7:33 I had already been working five years prior, and had my license at 14, and my own ride. I look back in awe. Mostly because I live in a much more populated non agricultural area than where I grew up. There is no way I want any 14 year old around me driving anything. At ten I was driving tractors down two lane asphalt with 30' wide tool bars on the back. Never tore anything up well except for a side roll sprinkler that I hooked with the disk and pulled it 30 yards down the field before the tractor finally noticed it back there. Dad was not a happy camper... and of course it had to be right by the house. LOL
@robertheinkel62253 жыл бұрын
Grew up on a farm also. Driving tractors was just part of growing up. During drivers education class in high school, on the first day, most kids never made it out of the parking lot. I drove to a town ten miles away, on a very narrow two lane major highway. Once I got my license, my dad put me to work driving a half ton Ford truck into town with one ton of corn in the bed to get ground into feed. She had a four speed with granny gear, and you needed every gear to climb the hills in our area.
@ShainAndrews3 жыл бұрын
@@robertheinkel6225 Wish more people could experience farm life.
@weaponspc3 жыл бұрын
I run a small shop. Myself and another Tech. You are great. You are very professional and I appreciate your videos. They are informative and interesting. I like to watch a few of your videos a week, and insist my tech does too. Most of the time, were following the same bloodtrail, but sometimes I learn something new. Thank you!
@johnsteger3 жыл бұрын
I'm not a mechanic. Just here to see the pain 😅. Love the video's
@MoparDan2 ай бұрын
I came across this two year old video today and thought I would write my comment as well. This looks very familiar since my car is a ‘12 Chrysler 200 Touring convertible in bright white color like this sedan. My engines oil filter housing never leaked but at 75,500 miles I replaced it with the Dorman Updated aluminum oil filter housing and did a tuneup early while it was apart. I also added the Baxter Performance oil filter adapter which converts the Pentastar engine to a spin on filter which retains some oil to prevent momentary dry starts which is a problem with the original canister type filter since the oil isn’t retained after the vehicle has been shutdown. This does help with the longevity of the Pentastar engine.
@TimothyTurtle323 жыл бұрын
Great Job on your videos. Really enjoy watching as it feels as if we are right there with you learning along. Everything is so well detailed and explained as you work. Thanks for all the time you put into providing the content.
@Al-Fiallos3 жыл бұрын
Wow. No wonder it's so expensive to fix cars today. I really appreciate all your videos because I can see first hand which vehicles to avoid like the plague. Regards, Al
@matthopcroft25353 жыл бұрын
“Rubber donger” love it Keep up the great work and laughs for us!
@kevinm51773 жыл бұрын
So glad you did this. MotorCity does a great video on it too but more angles and info are always helpful. Dreading when my Jeep finally needs this replaced.
@McBosshog853 жыл бұрын
Rumor has it Scotty is now a sponsor of the show and sent Eric that o ring grease
@darkknightjpw3 жыл бұрын
For Christmas I got a whole hose clamp pliers kit and I was so excited to use them when I drianed and filled the coolent in my wife's truck. We will see if I remember them next time lol
@thermalreboot3 жыл бұрын
When Eric was putting on the blue caps I was thinking this was a perfect job for Brake Clean. Imagine my excitement when it appeared on screen.
@michaelreese395011 ай бұрын
I have watched the Motor City guy because I own Chryslers. He is technically accurate and a good source of information, but I wouldn’t watch him work on lots of makes and models that I probably will never work on. You’re more entertaining is what I’m saying!
@shith00k3 жыл бұрын
I've changed the sensors and the whole assembly now a coupe times on these Pentastar motors. E-Z job which you went well above and beyond with. The new assembly has new sensors in it. The cleanup takes the longest part of the time. The R&R maybe 1.5 hours.
@brucejones23543 жыл бұрын
Love Eric's good advice, "don't over tighten these bolts, don't pee into the wind", and as he said that, another piece of "good advice" popped into my head, " watch out where the huskies go and don't you eat the yellow snow". You older guys will understand!
@notajp2 жыл бұрын
The wisdom of the immortal Frank Zappa…..
@richardtheoret47715 ай бұрын
Other words of wisdom "Keep wiping till you can't autograph the toilet paper"😂😂
@brettrose4693 жыл бұрын
Chrysler, the official sponsor of keeping the lights on and food on the table of mechanics everywhere.
@haroldbenton9793 жыл бұрын
I thought that was Ford and their Powerstroke V8 or GM with their 2.4 3.6 liter engines. I have a 2011 Caravan and except for the usual BS with the Wheel hubs the freaking thing is to heavy for the stock ones put in heavier duty about 4 years ago and upgraded the brakes at the same time no major issues.
@brettrose4693 жыл бұрын
@@haroldbenton979 if we're talking about the 6.0 Power Stroke I'll agree with that. And yeah those two GMs were not the best designs.
@danielhandler66463 жыл бұрын
Actually the 3.6 is a great engine. Solid internals, reliable after they fixed the rocker arm needle bearing issue. There’s stories of guys putting 600,000 miles on them with only one timing chain kit, and regular basic maintenance (plugs, LOF). That intake setup is asinine though. Who buries sensors like that?! You have to pay a shit ton of money for tear down just to do diag on the sensor and harness. Ridiculous.
@haroldbenton9793 жыл бұрын
@@danielhandler6646 Chrysler has a very long history of putting parts in wierd places. The 3.2 v6 that had it's water pump driven off the oil pump while being installed the timing cover was one. Or the 2 piece distributor drive shafts on their magnum line of engines. You literally could have half of the drive of the distributor fail and not figure out what was wrong. The only key was that you had lower than normal oil pressure but not enough to hurt the motor.
@richsweeney11152 жыл бұрын
@@haroldbenton979 Chrysler is FARRRR worse than Ford....I've had ford's and Hondas and Toyotas most of my life...I've never had a major issue, or really anything other than regular alternator, ect
@epoxy17102 жыл бұрын
Scotty warned me about this engine👏
@gotime55533 жыл бұрын
Did you remember to tighten bolt on power steering pump reservoir ? lol. Great video
@lordjaashin3 жыл бұрын
i don't think he torqued any of the bolts loosened in the video ;)
@satamanschmidt34283 жыл бұрын
@@lordjaashin You can lay major cash on that. Call William Hill Sports Book on odds that Eric torques a bolt. 1000:1 is the line.
@edchenal8212 жыл бұрын
I enjoy your comments and deductions.
@Jthomsonhate73 жыл бұрын
I did this job just yesterday on a Challenger.
@waiting4aliens3 жыл бұрын
Was it easier because it wasn't transverse?
@craiggoodwin97043 жыл бұрын
What a mess. Eric, you have the patience of Job. I'd have the hatchet and sledge out a long time ago. Guess that's why I am retired. Thanks for sharing.
@jdelbrid3 жыл бұрын
One minute and twenty-five seconds into the video and the 1st quote that comes to mind..."that was easy". 🤠
@Werewolfmage3 жыл бұрын
i had to do this to a wrangler. i also had the replace oil filter housing. wasn't a bad job. lol i work on cars and trucks all day and i sit and relax and watch eric o work his magic!
@jefflong32003 жыл бұрын
That invisible torque wrench is an amazing tool.
@frontspring13 жыл бұрын
Where can I buy one?
@jefflong32003 жыл бұрын
@@frontspring1 I believe it is Astro tools part #SMASpec
@kenmohler40813 жыл бұрын
@@frontspring1 You already have one. You just can’t find it.
@frontspring13 жыл бұрын
@@kenmohler4081 do you have an invisible torque wrench
@kenmohler40813 жыл бұрын
@@frontspring1 Well, I did, but I can’t find mine either. They are very sneaky.
@88jopar2 жыл бұрын
I had a 3.6l v6 in a 2012 Grand Caravan and it was a beast in terms of power. It didn't take much to spin the front wheels. Not only that, it never had a tick because I changed the oil and filter every 4k miles. Always used 5w30 regardless of season. Only issue I had on this engine was the thermostat housing and that were replaced as well as the oil pressure sensor. Very cheap to repair. I didn't have the oil cooler issue. Wonderful engine and I sold it due to the tranny going out. It had 141k miles and I sold it in 2020. I must say, the 3.6 was very good on gas and decently reliable.
@jamesdonohue97473 жыл бұрын
You have a 14 year old that works .Thats Awsome There’s hope for the next generations.
@88jopar2 жыл бұрын
SMA is one of the best, if not the best auto channel on KZbin. You do wonderful work Eric! Keep it up. If these mandates get completely lifted, I would love to pay you a visit and say hello. From the Toronto, Ontario region.
@KevinWindsor19713 жыл бұрын
16:10 It's the Chrysler-Bell victory siren.
@hankkingsley29763 жыл бұрын
I doubt it's a big honking V8 on a rotating platform it's just a standard fire siren meaning noon or 5:00
@lightcapmath2777Ай бұрын
Nice Erick. Will save this video when I need to "fix the problem" on my 3.6 VVT. I first found you when I needed to diagnostic my 2002 Nissan EGR issue. Watch that video 10+ times. In short you saved the day...the issue was the PCM. Peace to all including the feline. DVD:)
@joebledsoe2573 жыл бұрын
There is now a College course for Automotive Engineers. Its name is "How to make things hard to work on". The prerequiste for it is "How to hide the stuff that will need to be replaced". In the Classroom, there is a banner "Knuckle Busting starts here".
@chrishartley12103 жыл бұрын
What they don't tell them is that there's a special room in Hell reserved for them.
@EngineeringVignettes3 жыл бұрын
Make sure to catch the bonus tutorials on "how to take perfectly functional parts and turn them into plastic for fun and profit". Highly recommended.
@patcb8293 жыл бұрын
@@EngineeringVignettes That's a freshman course. Solutions to problems that never should have existed to begin with is a senior coarse.
@dgrenier49083 жыл бұрын
Followed by the how to hide routinely replaced parts in the strangest of places class 420
@robertlacob8831 Жыл бұрын
Another great job Eric, done professionally of course! I definitely would buy the aluminum cooler over a plastic one. Just another way to cut corners on production costs and vehicle weights.
@Lone-Wolf873 жыл бұрын
The sound alarm remind me of the movie Silent Hill. I was expecting pyramid head to show up anytime. 😂😂😂
@adventureoflinkmk23 жыл бұрын
Lunch siren!!
@waynecurrie90173 жыл бұрын
Most likely a volunteer fire Department
@pyro3233 жыл бұрын
Volunteer Fire Departments have a noon siren. We have one in my town.
@waynecurrie90173 жыл бұрын
@@pyro323 not all of them do I've lived in three different towns in two different states and none had a noon alarm
@oobaka19673 жыл бұрын
I thought the purge had started.
@happycommentator67733 жыл бұрын
Tornado ? Damn, I was hoping it was the house siren for the fire company. Great job as usual Mr. O .👍🇺🇸
@mikeekim19723 жыл бұрын
Right on Eric O, your a master mechanic in my book. Take care....God Bless.
@donkaiser67043 жыл бұрын
Your oldest is 14? How long have I been watching SMA videos, anyway? Seriously, I have enjoyed, and learned something useful, from every one.
@tomcordes17683 жыл бұрын
I believe the oil filter is different for the new and improve filter/cooler assembly. So the next oil changer will be in for a surprise.
@walterk12213 жыл бұрын
No, the unit shown here is the original through 2013 design.
@bigfoot94453 жыл бұрын
This job is harder when the engine faces forward. Been there. Nice job Mr. O! Thank you.
@KarateSensei713 жыл бұрын
Love all your videos Eric, but every video ends with me ordering a tool I probably do not need and might never use. When I die the garage sale will be epic.
@brandenmulhollen11553 жыл бұрын
Not many channels have your mix of entertainment and knowledge! It’s like we’re right there with you. Lol
@sinx22003 жыл бұрын
Nice to have guys like this that bring you their crap! Steady $ good on you
@claytonfite31973 жыл бұрын
Eric O, I've been watching your videos for a long time now. I like to joke around and kid about Chevys, Fords, and knock some rice grinders around. I like those Hondo's HA ha I've owned a few rebuilt a few of those engines in my younger years. However, this is one of your best videos. Because you're into this job so much in detail, the tools clean the way you explain the parts and how to disassemble and assemble the correct way. This is classic SMA 101. It's fun and informative and I'd like to say I do appreciate how much you do share. I have purchased a few SMA shirt's a Mug and I do watch your videos Intently because I am open to learning new things and receptive to the new changes in cars today compared to cars of yesterday. Thank You Eric Great Video
@alainbourgault19373 жыл бұрын
34:00 My dad always said: ''Don't pee against the wind and when you are done, don't eat the yellow snow.''
@TR193 жыл бұрын
It is a pleasure watching you do your craft. If I am ever in the area I'm gonna schedule some work, and I don't let anyone else touch my vehicles.
@John_Ridley3 жыл бұрын
Wow I've never worked on a Chrysler product before (*). Watching this video I was just WTF every 30 seconds. It's like at every design opportunity they had the thought "how can we make this needlessly complex, easy to break and hard to work on?" (*) I did own a 1979 Plymouth Horizon, but as my dad said at the time "Mopar apparently realized they had no idea how to make a 4 cylinder engine so they bought VW Rabbit engines." so I guess I was working on a VW engine. That thing I changed the timing belt, twice, in a gravel driveway, once taking the head off for the machine shop to work on. It was super easy to work on.
@jimcoffman47383 жыл бұрын
I had to replace that on my wife's 2013 Jeep Wrangler, at 60,000 miles. Not because it was leaking, but the early models (2011-2013) oil pressure relief spring was under the oil filter, it was retained in place by a little piece of plastic with small tabs on it, which broke off. They did not make a replacement piece for it at that time. That's about a $300 part to replace on it, now Dorman makes a replacement piece for the early types,it's about $10 and takes about 10 minutes to change.
@jordanvargovich3 жыл бұрын
Haha. "I don't work on Chryslers everyday cause I'm not crazy" .I'm dying. You and me both I always hated dodge/ Chrysler products when I was a tech .
@sharedknowledge66403 жыл бұрын
Exactly. What a spot for an oil cooler that’s prone to failure! I’m guessing the early version of this engine self destructed without one so it was an afterthought band aid. They’re the worst engineered vehicles made in North America.
@gerrye1143 жыл бұрын
I don't understand the hate. The oil cooler takes minutes to get to. It's just not a big deal. Working on the big three, Chrysler products seem the most logically engineered of the bunch. Ford makes everything a pain and I swear GM has a contest for who can screw the tech the most
@mikelovin73 жыл бұрын
@JORDAN Vargovich Be careful, you'll bring out the dodge fanboy tears 😂
@wigletron28463 жыл бұрын
@@mikelovin7 lol looks like 1 showed up right above you
@1337penguinman3 жыл бұрын
A pain in the butt to fix, and they never stay that way for long.
@pantherplatform2 жыл бұрын
I'm doing the same job right now. Customer just bought this, thought his transmission was leaking. The oil filter housing was gushing oil everywhere and only started to show symptoms after it filled the valley, ran down the bell housing, filled the splash shield and startes dripping on the ground...
@yaboysamshep14703 жыл бұрын
Already know it’s gonna be great !
@ShaneVertner Жыл бұрын
Thanks for making it fun and entertaining while learning how to do these things! I'm not sure why more people don't turn the motor upside down and shake things out 😆
@SuperMarioDiagnostics3 жыл бұрын
If Dorman provided the full aluminum kit, would you buy it? 😉
@SouthMainAuto3 жыл бұрын
😐 ughhhh.... If I'm honest the answer is yes. But if I picked it up and it felt and looked like a total Chinese piece of s*** it would go back in the box and back to them
@htownblue113 жыл бұрын
This comment is is far better than it’s like ratio…..hahahaha…..well done Mario! That was funny.
@humberloren3 жыл бұрын
I am a Cuban musician and I like car mechanics. I admire you a lot because you are a professional and I learn a lot from your videos even though I am an amateur. GOOD LUCK AND GOD BLESS YOU.
@midik1233 жыл бұрын
Just did it on a 2014 challenger today. No light was on, but oil all over the cylinder valley...
@hw59503 жыл бұрын
I wont complain about my 'VW V6 TDI' Oil cooler seal leak after watching this. Nice job.