ASTRO A50 Wireless Headset USB Repair

[@UberMicroRepairs]

I'm aware there is an audio isssue. I'm trying my best to get it sorted out. In the mean time check out this Xbox Series X repair kzbin.infozdviIec-L6c

[@geofffox5949]

Hey these are my headphones! I’m so grateful you would even look at them Leigh, can’t thank you enough and then to even manage to fix them! What a legend. Thank you so very much. I sing your praises at every opportunity ❤. A very happy returning customer

[@JayBoy26HD]

How much did it cost I need my Astros doing

[@clxudzYT]

The first video I found after 2 days of constant searching that has the exact same array of issues I have.

[@Jorge_srab]

the usb is only used for power suply? i min I have to repare it but i dont have the skills and the tools could y just weld a usb A cabel to the power connections?

[@notieagle2796]

Hello! Very good job! Can you tag all yours accessory’s with link amazon? ( micro usb, soldering products,…) ? Thank you very much

[@StilgarAstartes]

Another one for the Scorebook, Leigh! Nice job. :)

[@UberMicroRepairs]

Thank you!

[@bblod4896]

Kept away from a landfill, good repair.

[@tstitchr6262]

I wanna say. I only used this video bc i needed to open it. Bc ants took it over. Now its cleaned. Thank you lots!

I fix a lot of my own electronics and I'm telling you right now, when a client is rough with their stuff, these things happen. You have to deliberate and gentle when you handle it.

[@wifstd5568]

Another great repair.

[@mohamedbingh5567]

Thank you so much you don’t know how annoying this was

[@UberMicroRepairs]

Cool, glad this video helped you out man!

[@nateh2665]

Im looking to replace mine. Is there a specific name for the usb port you used

[@isonaldo4094]

Hello mate. I nocked the fuse above the usb port while i was removing the usb port with hot air. Is it possible to bypass this or not? I saw on the sides of the fuse some pads removed but the pads on the motherbord are still in tact. So shoult i bypass the fuse with wires or do i need to wire to the 4 pads on the fuse? Thanks

[@codylarsen9423]

Hey love the video about to do this to mine, could you tell me specifically which female micro usb socket that is with the four pins? Thanks

[@UberMicroRepairs]

There isn't a model number. It's a case of looking online matching up the footprint. I found them on Amazon in the end.

[@jeremyDufour-e5l]

what liquid did you use to remove the micro usb?

[@jonasanz3182]

Hey brother, don't you have the repair diagram for the charging base of the 4th generation astro a50?

[@Greven_M]

are you still reparing those? i have one that needs repaired ?

[@brennanjeffries4151]

My port seems to be fairly snug yet I’m having the same issue. Is there anything else it could possibly be? They’re brand new and never used. I followed the video and it when I checked the port she seems pretty snug

[@UberMicroRepairs]

The ports are a tight fit. The plastic comb inside gets pushed and pulled and over time it break the connections soldered to the board. The port can look perfectly fine but can be totally disconnected. We replace with a brand new port, we also reinforce the back to stop the comb from moving.

[@DG-xj7pm]

Can the gyroscope be removed? I hate this feature so much

[@NRNHawk]

Awesome Video, my A50 is getting issues every now and then, usually once a month. I have just reattached a cable, but still no charging, I guess it's that micro usb port. Although I have ordered a replacement station now, i would like to try and repair the old one. Is there a list on which tools you used to repair that port? I have the usual soldering stuff, but not that nice cleaning tools etc you use.

[@UberMicroRepairs]

Just take your time and use lots of flux. Some q-tips and 99% IPA will clean up well.

[@mr4rings_]

If I took this to a local shop what would an estimate be on how much it would cost?

[@jasonguy3420]

is there any chance you could do a repair on my astro a50 base, It has exactly the same issue as this one, thank you

[@UberMicroRepairs]

Please contact us here: [e-mail]

[@jasonguy3420]

A perfect repair for my Astro A 50. Many thanks to you both.

[@personalPickle]

Do you have the part number for the port, I need to do this exact job. Thanks!

[@AnotherSamurai97]

Hello everything is fine? I made the repair on the USB part but the Headset is no longer passing DATA, it turns on and works only with its adapter (in the case of use on the PS5), but without the adapter it does not recognize either the PC or the PS5, it It calls but there is no audio and you can't even talk at parties, can you tell me what it could be? The only thing that was repaired was the USB port.

[@Kalid.V3]

Did you solve the problem? Because it’s the same problem as me.

[@AnotherSamurai97]

@ No, the problem keep continue, i dont know how to fix this.

[@GeneralEducation414]

I have the exact same problem, will you fix it for me if I pay for shipping etc?

[@UberMicroRepairs]

If you are in the UK please contact us here: [e-mail]

[@47thWarden]

I have the exact same headphones and they don’t even light up on the button when it’s on the base station is fine but it doesn’t light up even when headphones are connected

[@frankerebus]

It would have been great if you had adapted it with a USB Type-C connector

[@UberMicroRepairs]

I agree!

[@VernonJeff]

would that power it if it was swtiched ? is it that easy ? lol @@UberMicroRepairs

[@sixsonic]

What temps are you using on hot air and soldering iron?

[@UberMicroRepairs]

Hot air about 350c with 50% airflow and about 345c on the iron.

[@chuckstewart9281]

I need the same repairs! Unfortunately im not very good with this stuff and living in a little town offers no assistance. Guess thats $300 wasted

[@UberMicroRepairs]

If you are in the US... Consider @computerbooter1566 he is Live streaming right now!!

[@Agawin007]

I’m having the exact same issue

[@playboiazul]

Shit don’t makes sense how a $300 headset is having this problem like wtf

[@UberMicroRepairs]

The ports are a little weak on these dur to the ancor points. However with craful handling they should last. Accidental movment is enough for them to come loose unfortunately.

[@MegaChickenPunch]

Dumb engineers and cost cuts. Customers are screwed

[@khaleesi_redrain5474]

Same

[@RealSeductions]

i successfully soldered on the new usb but lost the smallest fucking chip just up from the usb 😥

[@isonaldo4094]

Yeah have the same problem. Did you have another solution for it?

[@KlausKinky]

I search the port at the internet to do this by myself