Asus TUF FX504 Disassembly, Fan Cleaning and Thermal Paste Replacement

[@howfixit]

***ENG: Links to screwdrivers and parts in the description under the video* ***RUS: Ссылки на отвертки и заменяемые детали в описании под видео*

[@TheLawOf4WhoIs67]

Здравствуйьте, у данной модели ноутбука возможен съем и чистка кулеров в домашних условиях ?

[@paulallen4948]

Hey has your thermal noctua nt-h1 thermal paste came out of the die after few months?

[@stopbeingsadtheysaid]

Нанёс термопасту, поставил всё на место, закрутил, батарею подсоединил, закрыл крышку, открываю ноут, а клавиатура светится, кнопка включения не работает. Помогите пожалуйста 😢

[@exoC2]

"You need to unscrew 6 screws" *proceeds to unscrew 11 screws*

[@NovaRanger007]

Thanks for making this video, My Asus had been suffering from overheating issues, I was reading about thermal paste drying up and people telling me to do regular maintenance, thanks for showing me this.

[@ridi]

I folllowed your tutorial and it went very well! I repasted the GPU and CPU and managed to lower the temps by more than 15 degrees celsius. Thanks

[@ajuk1]

How old was your laptop?

[@funhub3993]

Is it same laptop

[@scarecrow234]

To anyone who is wondering about the thickness of the thermal pads used for the smaller chips, I spoke to Asus and apparently they're 0.5mm thick.

[@chikivelz]

How about for the tuf505du series?

[@petrovych4723]

😚😚😚😚😚😚

[@ragreff5603]

I just finished changing the two year old paste, they seemed to have done a terrible job at the factory. I used arctic mx-4. The temps have dropped by at least 10 degrees during load. thanks for the video!

[@XicorYT]

Do you kNow on which side the gpu is

[@aniruthdinesh9156]

@@XicorYT The GPU is the one on the left, with the gpu manufacturer name written on it.

[@afkoptk]

did you have to replace the paste on the smaller components too?

[@ragreff5603]

@@afkoptk i changed everything I saw. If you mean thermal pads, the thicker rubbery stuff, then no. Just regular paste

[@afkoptk]

@@ragreff5603 no i meant did u change the paste for the tiny stuff other than the gpu and cpu, like in the video above he said it was still elastic so not needed to cahnge, i meant those bits

[@nicolaspasten7680]

Hi, I have a question about what are the dimensions of the screwdriver you used to take out the heat dissipator?

[@zelden666]

Thanks for this, I got a colossal 30 degree temperature drop replacing the paste (the factory paste had basically nothing on the contacts)

[@TomySTS]

Hello, did you change the paste from all zones or only from.cpu and gpu?

[@zelden666]

@@TomySTS Only the cpu and gpu. Good luck with your repair!

[@shantnuagarwal7416]

Are you kidding me? I've recently noticed that straining my cpu throttles it down to 10-11Watts. Should I consider thermal solutions?

[@bryan8946]

Shantnu Agarwal yeah try it

[@aniruthdinesh9156]

What paste did you use?

[@Adanosiam]

My gpu was at 80 celcious , 90 + on specific games. I literally dropped my resolution to 800x600 just to not stress the system. After opening up and following your example to the letter, i can hear my fans shoaring. The paste from manufacturer was a solid block of gum and allover the place. I meticulously spread paste just to cover the surface evenly and now my gpu is 56celcious tops... I cannot fathom this, thabk you so much.

[@oliwiarebacz7123]

How did you remove the seal on the screw under the Windows logo? Does it invalidate the warranty?

[@howfixit]

Asus give to us possibility to upgrade laptop and this does not invalidate the warranty

[@shinjiiiii]

I'm having problems with the screw not turning because the plus sign + is broken. Is there a way I can turn it or pull it out?

[@chesmalgalicia8837]

My CPU was running hot on my one year old FX505DT, temps running near 200F during game play. I replaced the thermal grease on the CPU and GPU, now my CPU Temp is about 160F - 170F during game play. Thanks.

[@mirko7098]

Thanks a lot, got about -40 degrees drop, cleaned fan and replaced paste that was inexistent

[@TomySTS]

Replaced all the paste,

[@TomySTS]

?

[@mirko7098]

used thermal pads and paste both

[@TomySTS]

@@mirko7098 I used thermal paste everywhere.. i don't have thermal pads...

[@aniketkumar5089]

how did you cleaned the fans/

[@misledpaul585]

Hii, amazing tutorial, but I have a huge problem. At first I didnt have the proper screwdriver so I used the smallest one I had and tried to take out the screw of the heat pipes but I couldn't. Then I bought a set of screwdrivers and finally managed to unscrew them, except the one I had been trying to unscrew, its head was worn out. I still can't unscrew it and the laptop is getting really hot. Is there any way I can take it out? Maybe ASUS can fix it?

[@noirjuin]

hello, i want to ask... what is the small chip located near the battery? is it vga?

[@dr.gaming5415]

Bro is there any difference in temperature before and after using thermal paste please tell me with degrees, your videos are awesome

[@Sh-oh8mp]

жаль но ответа не будет походу

[@Zeegoku1007]

@@Sh-oh8mp What ?

[@kathleenlajoie9785]

Which one is the CPU and GPU? Is the GPU closest to the memory card slot ? With Desktop computers the CPU is easy to locate. I am not familiar with laptop layout and it's components other than Battery, CMOS Battery, Fans, Memory and Hard Drive / SSD, and heat pipe. I need to replace a noisy fan, think it has a bad ball bearing, so I need to know which one they consider being GPU or CPU side. Why did you not replace the thermal paste on the other components as they seem important too. This would of been the perfect time to install another memory module for Dual Channel (2 x 8GB) and replace the slow Hard Drive with a SSD as you could use a program like EaseUS Partition or EaseUS Todo Backup to clone the Hard Drive operating system / Windows 10. It would greatly improved your laptop performance with those two upgrades. You did very well on the video. Thank you.

[@ThePlantoparadise]

What about the fans themselves? I know the FX-504 has anti-dust technology for the fans, but don't you still want to get in there to check for dust anyway?

[@ngocdung8598]

Please do the instruction replace thermal paste for FX505DU or FX505GM

[@doggieph]

it is the same shit

[@bendaniel4712]

@@doggieph daaaamn bro

[@oddfeeling7956]

@@doggieph no for the 505DU its different layout inside

[@whatisayoutubehandlebro]

@@oddfeeling7956 found any guide for 505DU?

[@oddfeeling7956]

@@whatisayoutubehandlebro No bro, do you have issues with your fans or you're just here because of thermal throttling? Changing of thermal paste is easy on the 505DU, but getting the noisy fan out and cleaning or replacing is too delicate and hard

[@djoes7]

5:28 that black thing you are putting, is that important?

[@AndrewMykhalchuk-g1b]

3:29 what are you showing, and why did you not change the thermal paste there (or that it is smeared there)?

[@arsenmanfrediiphone8134]

Он сказал если thermal паста в эластичном состоянии его замена не обязательна. А как это менять фиг знает

[@AndrewMykhalchuk-g1b]

@@arsenmanfrediiphone8134 я поменял тупо все где была термопаста, тем более что вся засохла. Единственный минус, нужно смотреть какая толщина была в стоковом состоянии. Ибо там где контроллеры питания нужна очень большая

[@stevenz2998]

According to Intel it's better to not spread the paste after applying. "It might be tempting to spread the thermal paste onto the CPU yourself. We recommend letting the pressure from the base-plate or waterblock being installed do it for you. Incorrect manual application can cause air bubbles to form in the paste, which can negatively impact the thermal conductivity"

[@shd_hussain]

Great Tutorial! I am just about to replace thermal paste in my laptop.

[@george9453]

How it went??

[@Playmag41]

Hi there, thanks for the video, I just changed the thermal paste of my FX503VM yesterday (with some MX-4)for the first time and it runs way better, plus I undervolted the CPU with Throttlestop which helped too! I have a question though: do you know what is the thickness of all the different thermal pads? I'd really like to change them, but have no idea which one to choose from 0.5mm to 3mm....

[@paulallen4948]

did you replace the thermal pads?

[@TomySTS]

?

[@sanjaynagarimadugu6108]

Thank you so much for this tutorial! Very concise and helpful!

[@MWarfield]

Thanks! Helped me to replace my two fans as well! Nice video.

[@cadrash]

Replaced my FX504GM thermal paste to Noctua NT-H1 and got -20celsius on CPU and -15celsius on GPU temperatures. Thanks for Great Video

[@AnishKumar]

what were your temps before and after?

[@mohammedsami7080]

If you place in different areas of the heat sink will that be better or will it make it work vice versa and make it worse so that the heat will not be dissipated correctly ??

[@user-kz2qs5fx6m]

На чипах видеокарты что? Термопаста, терможевачка, термопрокладки? Чем эти чипы нужно мазать?

[@gachiforever4238]

Пни когда ответит

[@user-kz2qs5fx6m]

@@gachiforever4238 ))

[@shivamx008]

Thanks for your support 💕

[@hawkarKurdish-z7t]

I think replacing the Chips thermal paste with thermal pads would be better, do you agree?

[@jayantrahate3096]

Does it voids warranty? Can i get service from Asus service center? My laptop is currently in warranty period.

[@TheSaladino97]

The top left and right as screws turn numb (they seem to be stuck or something) and therefore I cannot open it. Do you know how I fan fix this?

[@ahmadhussam6362]

Hello, thank you for the guide, but I saw it after I changed the thermal paste without removing the battery, and after finishing, the laptop stopped working. What is the problem and how can it be solved?

[@ttsukii2677]

Sadly, your motherboard probably died. I made the same mistake not removing battery while replacing the screen and had a spark (short-circuited) which luckly destroyed backlight unit only. If yours can't even start the bios, then it is the motherboard I assume

[@Sykoorus]

How about Asus tuf fx504 How to replace gpu/cpu fan ? since mine is not working properly thank you

[@lukaskerner5752]

my asus tuf fx504 crash the whole time

[@wolforla]

@@lukaskerner5752 And it will, always. Unfortunately TUFs' cooling system is so under engineered, they are thermal throttling all the time. This means your BIOS is limiting your CPU and GPU clockspeed in order to avoid sever overheating. I almost bought a TUF for myself, but after reading the reviews and watching few disassembly videos, I have rather chose a ROG series laptop, which has the same CPU and GPU as a TUF, but built with a much more heavy duty cooling system.

[@zilvis1140]

How often you need to change thermal paste on gaming laptops?

[@hossamkamal2459]

Please can you tell me what is the size of this screwdriver ?

[@sreeshankar10202]

I changed the thermal paste like described in the video. But my laptop is not turning on. No charging even if I plug my Charing adapter

[@tortuga7290]

Есть смысл покупать ноутбук? Я так понимаю он дико греется и без этой процедуры ничего не поделать?

[@12GAMINGX]

Super simple guide, seriously helped!

[@krood_]

Should I replace my VRAM paste too? If not, can I put some thermal grizzly on top of it? PLEASE HELP !!

[@sercandorman]

Hi. After I renew thermal paste, I lost the light of the screen but I can use with hdmi. What should I do? I might use paste bad. Could it be because of this?

[@amriteshmohanty2475]

Mate can you tell the screwdriver dimensions ? I can't unscrew the heatsink, what's the dimensions ?

[@BodyBom]

ты смазал только два чипа, а там ещё по мимо них присутствуют три поменьше (но ты их не стал мазать) и ещё четыре вообще маленьких. два вопроса что это за чипы ? и нужно ли там менять пасту тоже, если ноут сильно греется?

[@howfixit]

Два чипа которые я смазал, это самое основное - процессор и видеокарта. Остальные чипы это видео память и силовые элементы, их смазывать не нужно, если термопрокладки на них в эластичном состоянии. Если после чистки и замены термопасты ноутбук продолжает греться в силу чего происходит "синий экран" или "резко перезагружается", купите охлаждающую подставку.

[@paulallen4948]

Did you apply thermal paste or was there thermal pad on north bridge?

[@AimanBasshunter]

what screw driver size is that?

[@grugi6347]

thanks man! I got a 20 degree drop with witcher 3!

[@ibragimov2]

Will the laptop turn on if it is plugged without battery?

[@novelflyer6695]

This was what I needed, thx. I'll replace the thermal past of my fx505 that has the same heatsinks and chasis

[@letychannel4847]

Hi, did you do it?

[@novelflyer6695]

@@letychannel4847 Yeah, I did it. I used artic mx5 and my temps now are good, now they never hit 90° celcius and they are between 70-80° celcius

[@paulallen4948]

I have fx 505ge did you replace thermal paste in northbridge. I totally replaced thermal paste in every area and yet my idle temps is always 50. Also did your laptop have any thermal pad?

[@Johnstonsonsen]

Hello and thanks for this video. I have bought the Asus TUF FX505DV laptop a few days ago and I am very disappointed by now. The bios is a mess, very basic, no options to define fans curve, also the armoury crate app does not allow to create an individual profile for relation between cooling-silence-performance. I realized by use of gpu-z, which shows gpu and pcu temperature, that the cpu works at over 80 °C (celsius) up to 91 measured highest temperature in Gaming turbo mode. That was a little shock for me, at first because I never saw a higher cpu temperature vs. gpu temperature and also because it should be a life time reducement for the laptop. AMD tells about ryzen 5 3550H cpu the hard cap temp. would be 110 °C but thats not far from 90 °C. So I ordered now a cooling Pad for the table and also liquid metal paste, but I feel a little fucked by ASUS because I do the work they should had done (optimising the machine to 24/7 propper functionality. I still payed for that shit… Problem is in my opinion the missing Ventilation input. I can try out the cooling pad, but where it should push the fresh air? There is not eneugh entry. The most I expect will bring the liquid metal paste. But it will not bring more than 5-10 degree I think. Will it? My question to you: Could you also realize higher cpu temperatures, because the cooling and case holes look like work the same (btw I have added second 8GB RAM and a hdd, could might be a little raise of temperature in this). best regards, Johannes

[@alabtmt]

Hi, I know this video is old but I have to ask. I did this thing but I didn't disconnect the battery cable. And now my laptop does not turn on. Do you know if it has a solution or something? I'm worried. PD: I didn't disconnect the cable because I saw, saddly, another video where the guy didn't do it. Hope you can answer and thanks for the good video.

[@ferofferd]

It probably got short circuit Get that unit looked up

[@dennisstaf2170]

Thx, and hello from Russia!)

[@LongNguyen-op7ls]

i've removed the thermal interface of video chips, is there any problem ? should i put the thermal pads there ?

[@sefrainmenespacheco7562]

was there a problem?

[@AzusaSnowflake]

What is the size of heat sink screw? I need to replace it, please reply as urgent.

[@АлександрСкрипкин-т9р]

Есть ли видео по разборке верхней крышки данной модели (ASUS TUF FX504) для замены матрицы?

[@shahafsagi7257]

is it NEEDED to replace thermal paste when cleaning the fan?

[@thevintageous7359]

Even i have same doubt

[@riteshmishra7130]

basically there is nothing hard and fast rule , but u should replace the thermal paste because once u plug out up the heatsink it the thermal paste will be displaced and will lose the contact , so the summary is u should replace the thermal paste with new one

[@dondraper4438]

I've been building desktop computers for a long time and recently got into playing around with my laptop. Why do guys spread out the thermal grease in the laptop videos? Isn't the heat sink going to spread the thermal grease anyways?

[@howfixit]

Actually Yes, heatsink going to spread the thermal grease anyways, but sometimes it's do to be sure that everything will turn out right

[@t4pusd]

Can you please show the procedure for opening fan compartment? My fx504 is throttling like hell. Can't even play cs go! I think i need to clean the fan compartment thoroughly but can't find any instruction about that online!!

[@howfixit]

If the fan doesn't work correctly, cleaning will not help. It is better to replace the fan with a new one.

[@wasdfingers7186]

Dude I also faced same problem by performing undervolting both CPU and GPU it fixed my problem.

[@xenonohad]

Can someone explain me the video chip thing with the thermal in elastic state and why ? sorry kind of new to gaming laptops...

[@pitufoblu5127]

by accident I removed the thermal paste on the video chip and I can't get the nocturnal H1 that I can do D:

[@xenonohad]

@@pitufoblu5127 Im not sure thats why Im asking but it seems you need to put the thermal not with pea size but much more

[@pitufoblu5127]

@@xenonohad I am from Mexico and I can not get the thermal paste night h1 and by mistake I removed all the thermal paste from the video chip and that I put artic silver 5 in the processor and graphics card until there everything well but I do not know what to do with the other parts to remove the paste: / I need some solution why noctua h1 vs artic silver is thicker noctua h1 could not place the artic silver in those places that remove it without first knowing

[@pitufoblu5127]

I see that it is not necessary to replace it in those places but I already did it and I do not know what to do or what I can put it .. I do not get that thermal paste here in my country I have that same laptop fx504

[@xenonohad]

@@pitufoblu5127 yea I get your point so I guess we will wait for someone who know to answer

[@chipperjones3112]

Greetings, My laptop screen seam came apart near the hinge. I can send you a picture if it helps. I tried locktite and gorilla, but they both failed from me opening and closing it everyday. Do you have advice which glue I should use? Also, would you suggest I treat the plastic with anything? Can I drill a hole there and insert a wire for strength?

[@abhinavkumarvats5200]

This is a manufacturing defect in the tuf series. I had the same problem and since i used glues like you they didnt replace my screen under warranty.

[@arpitsahu9940]

Having the same issue currently. Did you find any solutions to the problem?

[@chipperjones3112]

@@arpitsahu9940 I ended up drilling a 2mm hole in the corner and wraped a wire through to hold the parts together. Then I put command strips around the outside. Extremely unellegant but its worked ever since. Believe me when I say I tried every glue imaginable with no luck.

[@arpitsahu9940]

@@chipperjones3112 DAMN!!!

[@raheemabdul1066]

Awesome guide, thanks.

[@froze4066]

My laptop wont turn on after this Even my charger led is not turning on (i didn't take my battery cable out before taking out the heat sink is that the problem) plz help plzzzz!!

[@НикитаЗмеев-е3о]

какую термопасту лучше использовать для этого ноутбука?

[@НикитаКостромин-д5и]

Привет, не мог ли ты сказать на сколько упала температура?

[@TheYarik87]

Как в целом эта модель справляется с нагревом? Хочу купить новый ноут и этот один из вариантов. Про Дэлл и Леново все в один голос говорят что сильно перегреваются.

[@batmanisawesomey]

Mine worked fine for about a year, but now I can't control my fans which are constantly alternating between full speed and off

[@techraider2325]

Which mm thermal pad is suitable for tuf fx505

[@chikivelz]

Up

[@TomySTS]

Did you find out?

[@krood_]

0.5mm

[@pablorivascaamano2184]

Hi, I put thermal paste and now my laptop doesnt turn on, what could be gonne wrong?

[@paulallen4948]

what about thermal pads should we replace them? since we open the contact become open

[@apurvsharma1261]

Aravindsrihari B V na na

[@paulallen4948]

I replaced the thermal pads with arctic mx-4 temps spiked up

[@apurvsharma1261]

@@paulallen4948 lol never heard that

[@paulallen4948]

@@apurvsharma1261 I replaced vrm mosfet thermal pads with arctic mx-4. Though the temps were lower than stock thermal paste. It wasn't as low as I had expected. Gpu temp Before-85c while playing games After application-68 After second application-75(replaced pad with paste). Cpu temp: 93c After application: 84c After reapplication:92

[@apurvsharma1261]

Aravindsrihari B V which laptop do u have and when u opened the laptop did u cleaned the fan and vents? And did u cleaned the old thermal paste completely?

[@ИльяСтеблов]

Привет. Заметил по Аиде что CPU на таком ноуте в тяжелой игре греется до 87-92 градусов, при этом всем он не троттлится. FX504GM i5 8300h, gtx 1063. При этом куллера выкручиваю на максы, задняя часть ноута установлена на возвышенности для циркуляции. Стоит ли опасаться что он погорит? Или нести в сервак( пока что есть гарантия и стоят пломбы ) пусть там почистят, термопасту сменят.

[@ErnestoLibertaTn]

i Have a new tuf fx505dd ( 3 months old ) who heats up even on idle , should i replace thermal paste ? and does that void warranty ?

[@victor-str]

It's better to replace the laptop. I've got FX505DU as well and I'm very disappointed with it. Asus is no longer a reliable manufacturer for me. It's a pity I wasted money on it and used my previous experience with Asus to make a buying decision, unfortunately today Asus is a way different than was 5-6years ago.

[@biansanity]

@@victor-str whats wrong with that laptop?

[@bazookaboy7776]

I tried to take out the heat sink and it wouldn’t come out without the fans attached. Now the laptop won’t turn on (everything is connected as it should be)

[@TheLawOf4WhoIs67]

У этого ноутбука возможен съем и чистка в домашних условиях кулеров?

[@howfixit]

конечно, что вам мешает сделать это дома?

[@TheLawOf4WhoIs67]

​@@howfixit Спасибо за ответ. Еще один вопрос: Данный продукт позиционирует себя как "самоочищающиеся система кулеров" насколько это правдиво с вашей точки зрения.

[@howfixit]

@@TheLawOf4WhoIs67 многое зависит от местности где работает ноутбук, если дома есть животные (кошка, собака) тогда уверен, что самоочиститься от шерсти не получится

[@kokas2567]

How-FixIT на чипах видеокарты что ? Чем надо замазать ? Термопастой?

[@TheLawOf4WhoIs67]

@@kokas2567 На днях занимался заменой термопасты на данном ноутбуке, на чипы намазал такую же термопасту как на процессор и видеокарту. Насчет кулеров там скапливается пыль, так что "самоочищающиеся система кулеров" не более чем маркетинговый ход. Плюс ко всему их нельзя разобрать - т.е в дальнейшем смазывание техническим маслом оси вентиляторов проблематично.

[@BYRONSLAM09]

first time i see applying thermal paste rather than thermalpads in the vrams modules and miscellaneous chips... why?

[@BoringTravel]

как же удобно сделаны современные Роги)) разбирал сейчас старенький ACER - капец там 40+ винтов, что бы увидеть процессор, надо снимать абсолютно всё, кучи шлейфов, креплений, держателей, скотча всякого... Ужас а тут что бы оперативу поменять, надо только заднюю крышку снять и отключить шлейф батареи!

[@darksevenmaster5398]

Which one is cpu and also is cpu upgradeable?

[@vishalragi9144]

Nope, you can't upgrade the CPU as it comes soldered to the motherboard.

[@xenonohad]

does anyone have idea what is the diameter of the screws in the heatsink?? I sent it for repair and later wanted to change the thermal paste myself and the company destroyed 3 of the screws...

[@dukenukem7043]

do you have a video of how to remove the fans? i accidentally banged the side of my laptop with my mouse the other day and the right fan has been making it a weird grind noise . i completely cleaned out the vans with a air compresser and vacumn and sprayed a hint of lubricant in there but its is still making the faint grind noise, nothing seems to be rubbing on it and nothing is caught in there from what i can see but im hesitant on removing the fans because it looks complicated

[@Gedas_Ke]

never, ever clean your PC with a vacuum.

[@dukenukem7043]

@@Gedas_Ke i ended up replacing the fan its fine now, used the vacumn nothing bad happened

[@Gedas_Ke]

@@dukenukem7043 that's good to hear, but in the future I would avoid using a vacuum, compressed air is more than enough to clean dust and is safer for the hardware. cheers!

[@silent4916]

Wich is the gpu right side or left side from our perspective?

[@boxedowl]

Great video but my Asus is still getting over 100°C

[@МихаилСофич]

А если менять термопрокладки то какая там толщина нужна? Или лучше к5 PRO взять?

[@Slime-be5iw]

На 4 pda пишут 1 мм

[@Spartan-John117]

Thank you for the guidance

[@yuryzelianko]

What size thermal pads are used for memory chips?

[@jorger5945]

Did you find the size?

[@hellagesoon]

I think they are 0.5mm but mine is uneven so i used 1mm and 0.5mm thermal grizzly pads

[@jorger5945]

@@hellagesoon thank you so much bro

[@killtrik]

Can someone tell me the thickness of the thermal pads? I wanna replace them but idk which one should i get because the ones were total disaster

[@felix_the_tomcat]

The thermal pads are 0.5mm thick

[@sanjaynagarimadugu6108]

Thanks for the tutorial! I need to do this soon for my fx504 lol it has become so much worse performance wise

[@madhunagar7940]

Is it good now? After installing thermal paste? Also which thermal paste did you use and in how much quantity?

[@sanjaynagarimadugu6108]

@@madhunagar7940 I replaced it today, the temperature has dropped quite considerably, initially it would get to 88 and undergo thermal throttling, but now, after extended periods, it stays in the 76 to 80 range. On normal use, it's temperature has reduced by 20 degrees. I used the same noctua thermal paste used in the video. It was a bit difficult to remove the plate covering the cpu and GPU, but it eventually came off

[@jayjadhav962]

Can we upgrade CPU and GPU in this model ?

[@bananagrim4001]

i dont think upgrading cpu n gpu is possible on any laptop... if you want better cpu or gpu then you gotta buy a new one

[@Gedas_Ke]

unfortunately, you must remove the heatsink in order to clean the fans, which means that you have to replace the thermal compound every time you do that. I used arctic MX-4 and after replacing the stock paste managed to reduce my CPU temp during a stress test from 90C (thermal throttling) to 72C max. results would probably be even better with something more expensive than the MX-4. so yeah, guys, replace the stock thermal paste, it's garbage! ASUS really didn't bother using quality paste, unfortunately.

[@Dean.Michael.Winchester]

Can you suggest which thermal paste is the best, mine stays at 77-80oC while playing low graphic game.. I just changed it last week..

[@Gedas_Ke]

@@Dean.Michael.Winchester I bought some gelid gc-extreme and so far am extremely happy with it. 3 months after changing to it the temperatures are still good.

[@Dean.Michael.Winchester]

@@Gedas_Ke what's the temperature tho?

[@Gedas_Ke]

@@Dean.Michael.Winchester goes up to 80C during a 10min stress test, which doesn't trigger thermal throttling.

[@Dean.Michael.Winchester]

@@Gedas_Ke oo thank you for the input, I am going to try that brand, I used to use Kryonaut before, but I seem to dry quite fast since I am a heavy user, now I am using coolermaster master gel, but I am dissatisfied with the performance 😔

[@pigeongamerrr]

У меня точно такая модель гудит как трактор и вибрирует, иногда не гудит, иногда гудит, менял термопасту, не помогло! Может что то с кулерами? спасибо за ответ

[@howfixit]

Здравствуйте, да быстрей всего кулер гудит

[@finh-d9t]

Подскажи пожалуйста,стоит ли покупать Lenovo v310-15ikb (80t30148rk).1920×1080,i5 7200u,hdd 1тб,озу 4гб. Стоит 30000 по скидки,хотя в других цена 40к. Если не стоит брать,то какая альтернатива есть данному ноутбуку?

[@howfixit]

В рамках цены в 30К руб. сомневаюсь что можно подобрать что-то лучше с такими же характеристиками. Аналог с такой же ценовой политикой + характеристиками, есть ноутбук Acer Aspire 5 A515-51-55XB в котором корпус будет покрепче, но я бы не стал покупать не один из них.

[@finh-d9t]

How-FixIT почему?

[@howfixit]

Это бюджетные модели в которых вероятней всего будут проблемы с петлями у ноутбука, матрица будет установлена бюджетная от которой глаза могут болеть. Конкретно в Lenovo v310 ужасно тоненькая термотрубка на системе охлаждения и всего один слот под оперативную память.

[@ozturk87]

Hi can i use on this laptop asus fx503vm a Thermal Grizzly Conductonaut metall paste ?

[@lakshyasingh8931]

No, don't do it. There is no IHS on the Die, so you might shorten the life span of your CPU and GPU by using a liquid metal because of its corrosive properties.

[@leaguestealer1646]

yesu can i just replecedin my old gaming lenovo Z 50 75

[@ConnorA21]

Is that thermal pads on the gpu vrms/memory chips as I want to know if I can remove them and replace with thermal paste

[@howfixit]

No, this is a different consistency

[@ConnorA21]

@@howfixit what is it I could use Mx4 thermal paste?

[@ConnorA21]

Could you tell me what I can use to replace the vrm paste with?

[@ConnorA21]

@@howfixit is it AS Ceramique, could you reply please as I'm trying to fix my laptop, what is the white stuff that is used?

[@howfixit]

I can not understand why you are trying to change the paste on the gpu vrms/memory? What will this improve in your case?

[@elm2599]

Стоит ли менять заводскую термопасту на этом ноутбуке?

[@howfixit]

Не обязательно

[@SkajlafPL]

Hi, anyone knows what thermal pads will be best for this laptop? 0.5mm, 1mm?

[@scarecrow234]

Asus says they're 0.5mm thick

[@krood_]

@@scarecrow234 Hey , Did you put 0.5mm thermal pads on the VRAM ? How did it go ?

[@xBaTo105]

I have black screen ,but the power is on After cleaning my laptop Any one has solution?☹️

[@abbukhan3450]

What's the screw size?

[@erikkovaliv8530]

Почему он не полностью очистил старую термопасту ?

[@cjklo6423]

На конеыто реальное видио,лайк.

[@pitufoblu5127]

If I accidentally delete all the thermal paste and I can't get noctua h1, what can I put on the video chip?

[@howfixit]

You need any good thermal grease; you cannot use a laptop without thermal grease.

[@pitufoblu5127]

@@howfixit ok, thank you very much another question I have that same laptop fx504 about 5 days ago I changed the thermal paste I put artic silver 5 and it is not as thick or (thick) as the night H1 I can not buy that thermal paste in Mexico that I recommend putting yes Do I remove thermal paste from video memory? On the graphics card and the processor, if that thermal paste worked for me, but since I didn't know much about it, I removed all the pasta and I can't get the same one you use, other than the H1 night, what paste can I use there: ( I hope you can give me some solution, I would really appreciate it! I bought the laptop in December I don't know if you understand me I'm using sorry translator.

[@howfixit]

You can apply thermal grease to the video memory chip and see what the result will be in temperature. If the temperature is high, then you should use Thermal pad: ali.pub/3q3zei

[@pitufoblu5127]

@@howfixit last question thank you very much you are a hero but how am I going to place that? Am I going to put everything I remove from the pasta right there? I will put it directly to the memory chip or the cooling tube

[@howfixit]

Thermal Pads are put only to the memory chip. On the CPU and GPU you must put thermal paste, as in the video

[@heheyboi1065]

Hello, if your Asus laptop ever broke, and if it's main board ( motherboard ) is fine, Please Sell me. I'm in Maldives, my Asus tuf fx505dt is dead, and there is no Asus Service Center here in the Maldives. Hence I'm looking to repair the laptop myself.

[@BaLaMuTt89]

Автор, батарею перед любыми манипуляциями внутри ноута надо отключать.

[@americanamerican912]

Is the video card soldered ???

[@howfixit]

Yes, CPU and GPU are soldered