Atgames pinball, with new LG 1440p playfield with HDR-10, deluxe backbox and 8 solenoid setup.

[@macdox69]

Very nice.👍 I'm currently doing most of the same to my cabinet, but just solenoids for the flippers. Maybe complete OTG change in the future.

[@JerseyJohnnysElectronicsGaming]

I'm sorry to tell you. You absolutely are going to end up going down the rabbit hole once you start. Lol 😆 enjoy it.

[@macdox69]

@@JerseyJohnnysElectronicsGaming Already has. Complete gut with 8 solenoids. Almost done. (for now :) )

[@thechampagneroom1]

The screen looks so much better!

[@JerseyJohnnysElectronicsGaming]

If you think that looks good, I just built my own table and that screen is now my backglass and I'm using a 42inch LG 4k oled , the oled42c2 . It's Amazing looking!!!.

[@Freethinker1967]

How did you get the pinball buttons and the buttons on the front to work without the PCB? Did you wire them up through a pinscape controller?

[@JerseyJohnnysElectronicsGaming]

I used a cheap ximotech controller at first, then went to a kl25z board

[@williamsiegel7277]

How did you attach the bezel to the LG monitor?

[@tonyambrose5679]

What model screen did you use for the playfied? Any lag?

[@gmee123]

32GP83B-B.AUS was his reply to me. LG brand.

[@JerseyJohnnysElectronicsGaming]

The LG 1440p , 165hz and my pc is running a rtx3090 founders edition. So zero lag. But I built my own cabinet now qnd this screen is now my backglass on my new machine, I'm using a 4k 120hz LG OLED for my playfield (the oled42c2) zero lag. It has vrr, gsync, tons of power etc.

[@JerseyJohnnysElectronicsGaming]

Just to be clear, I love building pcs etc. I retired young (at39) so there is absolutely no reason to build a pc like the one im using for pinball. It's overkill to the 100th degree

[@joem7895]

Does the stock haptics feedback still work if you do the monitor swap ?

[@JerseyJohnnysElectronicsGaming]

No I added dayton exciters, bass shaker , subwoofer etc . I use 7.1 SSF

[@stimey0000]

How are you connecting the plunger to the PC? If you connected via a KL25Z how did you connect?

[@JerseyJohnnysElectronicsGaming]

This is old so I dont remember that, I built a new vpin with LG OLED42C2 screens etc. But I literally just bought "the Cleveland Software" entire setup. Phil the owner sends it, if you pay for it, it comes with 8-10 solinoids all setup, all your buttons, his plunger, the kl25z board is mounted and sodderd to his personal boards, flasher bar, plunger, beacons, shaker motor, gear motor all plug and play. So yes it's connected via a kl25z board technically, but really it's all connected to other boards, a kl25z is on one though. I have videos showing it from last summer.

[@BusyAir]

Is this still capable of running the ALP stuff, or did you gut it?

[@JerseyJohnnysElectronicsGaming]

Gut it.

[@gmee123]

Dude, where did you get that backbox upgrade??? :)

[@JerseyJohnnysElectronicsGaming]

Buystuffstore in Canada. This one is for sale to anyone who lives in the nyc area, the backbox, the ssf setup, the full solinoids setup, plunger, a atgames game deck.

[@seanguttman2153]

@@JerseyJohnnysElectronicsGaming you still have the backbox for sale?

[@gmee123]

What is the specific model for the playfield monitor?

[@JerseyJohnnysElectronicsGaming]

32GP83B-B.AUS

[@gmee123]

@@JerseyJohnnysElectronicsGaming Thank you Sir. Some of the complaints on the reviews say the backlight bleed is terrible. Is something you noticed by chance?

[@thepacketnarc7634]

This is NOT an AtGames Pinball Machine. It's just the cabinet. This is misleading people into thinking they can either replace or upgrade their stock monitor with this one. You cannot. This is only if you plan to use the cabinet exclusively for OTG mode with a PC. This will NOT work with the stock ATGames motherboard and software.

[@JerseyJohnnysElectronicsGaming]

This whole channel started out about changing over from stock to full time PC so do some research. This isn't misleading at all, I'm a moderator for a atgames mod group. I was the very 1st person to do the 32 inch LG monitor swap, and I NEVER have said this is playing atgames software. Not once in the video do I say or show atgames software. This was the very first time switching over to full pc. My wheel isn't even setup . Your the only person who somehow thinks pinup popper is atgames pinball. This was at a time when the community was trying to find a 32 inch monitor that would fit into the atgames cabinet. Infact after I did this mod and released it in the forums, atgames not only contacted me, they changed the inside of the cabinet to make it more difficult for people to drop this monitor into the cabinet. I was able to literally lay the monitor into the cabinet. After everyone starting doing it, atgames changed the insides of the cabinet to make it more difficult to add a new monitor. So anyone who got a pinball table after wave 9 , could no longer just drop in the LG monitor. Regardless, thousands of people have this monitor in their atgames cabinets and went pc full time because atgames is a waste of money. Watch the entire video next time and you will hear me talk about showing off the Cleveland Software solinoids and the LG monitor swap. But you didn't do that did you? 😂

[@thepacketnarc7634]

The title of your video is AtGames Pinball. This isn’t AtGames Pinball. It’s visual pinball X and Future Pinball running on a PC. The point is that there are dozens of people searching for ways to replace or upgrade their stock table. They find your video because of the title, and the video doesn’t contain anything to help them. You’re just showing how you gutted a cabinet and replaced everything. Cool, good for you man ! But using the labels AtGames is very misleading. It suggests you upgraded an AtGames pinball to a better display. Which isn’t the case. That’s the rub.

[@JerseyJohnnysElectronicsGaming]

​@thepacketnarc7634 wrong again, that's not the title of my video. Read it again and post it again. Also in the video I talk about how i play mostly fx3, how I have zaccaria from steam, all used in popper. The title, mentions, solinoids, the display and other things if your wrote the entire thing. I'm not gonna argue with the 1person out of almost 5000 on tbe internet who didn't watch the entire video, or follow my videos over 2 years ago , which show the progression of what is going on here. It's not up to me to have to explain to you everything going on in tbe title just because your lazy. You have to watch a ton of videos to understand it all. Again I'm not debating a 2 year old video. And your wrong, I have a video where I did change the video board and in one of the videos I play live TV of a NY Jets game playing on my stock atgames backglass screen. Using a new display board. I also tell you how to find out what boards you need, what ribbon cables must be used and websites to go to to search and find out what is needed. It's in the collection,again these are over 2 years old. I'm not misleading anyone, you literally weren't miselead, you watched part of the video and see I'm not playing atgames games on the screen so it's not my job to change my video titles because you read the title wrong and the video wasn't what you thought it was. Don't watch the video if you don't like them. It was to show people the Cleveland Software solinoids among other things in a on going series from 2 years ago. Your picking one video and complaining about it because you misread the title. Your not paying money or anything, just go to another channel. It's really that simple. 2 years is ancient in technology modifications.

[@macdox69]

@@thepacketnarc7634 At this point with the latest buystuffarcades upgrade you now can play atgames as well, so techically it can be done.