Audi 3.0 TDI Injectors Removal

[@nigelw598]

Hi mate, Thanks for taking the time to post this. It is very helpful. Thank you my friend, Cheers, Nigel

[@tobyhosker1787]

What's the nm on the 2 nuts that hold the under bracket with the two holes in it ?

[@albertkovacs1717]

What is the torque for the nuts and do you need to change them for new one thank you

[@diamondkai2354]

So there is no stretch bolts for these injectors,just 2 nuts?

[@rmartin2763]

Great video, Thanks from Texas for your help, have a 2012 Touareg TDI.

[@colinaglae2605]

Thanx for posting the video on Audi injectors removal.

[@crank3646]

You are welcome :)

[@Arendeagle]

Hi. I've dropped the last nut into the valve cover. Any idea of how to retrieve it? It was the very last nut that holds the injector in place..

[@crank3646]

Only the magician of magnets can help you now :D

[@micknnic53]

Great informative video if only I'd found it earlier, changed a faulty injector on my Q7 with the p0204 code using the same old stretch bolt and no cleaning 🙈, tbh it lasted 10 miles before throwing up the p2146 code and I'm guessing this is due to my rushed dodgy mechanical skills 🤦‍♂️

[@roozbonGT2RS]

my friend thanks for the great video... my question is to put a new injector do you and can you use the ross tech cable to adopt the new injector?

[@crank3646]

Never done it with Ross Tech . But i believe its possible , just search in google , Ross Tech injector coding . I use Launch X431 for this procedure .

[@roozbonGT2RS]

thanks!!!

[@Misikee0816]

Rooz Bon yes,You can adopt with VCDS ,engine/long coding

[@critical_mass8279]

Were you able to start the engine immediately, without a airlock issue?

[@flipr2118]

My friend where can I get that adapter for the slide hammer to injector

[@crank3646]

It is selfmade

[@macauleyh5]

@@crank3646 what size thread is on the injectors? Looking at making myself one, getting mixed sizes ranging from M8 to M14 (mines a 2008 Audi A5 3.0 tdi)

[@robertlong9552]

Great video very useful? Have you done one on testing the injectors?

[@ROCKWITHTHEGLOCK]

Thank you from Germany

[@euunitedwestand1471]

ROCKWITHTHEGLOCK long Live Union Europe SIR !

[@mickeytaker4255]

Why do Audi make DIY so difficult

[@DutchDukeMan]

$$$$

[@hobo1704]

So you have to spend $$$$$

[@arfanzaman6817]

Does it matter if you turn upside-down this injector plate when installing injector

[@critical_mass8279]

Good video. Does the copper washer just sit inside the recessed hole the injector slides into.. Is it easily removed?

[@crank3646]

Thanks Gareth ! Most of the time , the copper washer comes out with the injector itself , but if it remain in the hole you going to need something to get it out from there . Its important to change the washers , everytime you remove and reinstall the injectors .

[@critical_mass8279]

Crank thanks for the reply. Yes, I have a ticking noise which sounds like it's coming from one of the drivers side injectors. (possibly centre one). I'm told it could well be the washers that need changing.

[@crank3646]

It is possible , but most of the time is the injector itself . Did you check the correction factors in VAG COM ?

[@critical_mass8279]

Crank no, not yet. But I will.

[@critical_mass8279]

Crank took readings today 0.99, - 0.33, -0.38 -0.24, -0.42, 0.38

[@xxcntgiuxx]

Which are the numbers for screw on injektor? M14x1,5?

[@mateuszkosek529]

The same question :)

[@anttisalonen7910]

Yes, M14x1.5

[@GTRaddict]

Great job !

[@yordanmitev6363]

Здрасти ,чудесно видео,много ми харесва обратноя чук,с какъв диаметър и резба е втулката от към дюзата. Мерси

[@crank3646]

Мерси ! Имаме доста втулки за различни видове дюзи и всички са смесени на едно място . За да ти помогна трябва да имам разглобена такава кола при мен , а в момента нямам

[@hamaygeology1]

Hello Sir. I have Audi Q7 2008, I've changed injectors Still my problem doesn't solved it needs a spray into air system to start the engine without spray it doesn't start Could you help me pleases to solve that problem I'd be very grateful..

[@crank3646]

Hello! You have some air in the fuel , probably some little crack in the fuel lines .

[@BeshevGames]

Заради този клип се записвам за канала, понеже от няколко дена имам Audi и... да :D

[@franceinfo377]

по русскому хорошо говоришь Брат. 👍

[@sylvest791]

Thank you :)

[@franceinfo377]

фарсунки как на Renault. очень Похоже.

[@justjpplayvj4340]

bratle obqsni go na bg ko sa muchish na eng :D

[@crank3646]

Хаха , някой ден като го науча , гледай само колко подробен ще стана :)

[@justjpplayvj4340]

Crank Ще го научиш izi ;)