This video will cover the replacement of the center console trim for an Audi B9/9.5 Product: bit.ly/3LFwzBi
Пікірлер: 35
@jakedragsknee28 күн бұрын
Got my dad one for Father’s Day, thanks for the video
@jonathanurs27 күн бұрын
That’s awesome! Happy to help!
2 ай бұрын
This is a tremendously helpful video. Thank you so much! A couple of observations for anybody else attempting: (1) As JonathanU said, do not try and pry off the black trim piece without taking off the plastic undertray to which it is attached. The reason is because not only is the trim attached by clips but also by screws. It is impossible to remove the trim otherwise! (2) The undertray attaches to the center console through six metal clips. When you pry off that piece most if not all of the clips will likely fall off the plastic tabs they are attached to. On the left side middle, that clip may be stuck inside the connection hole. To get it out just pull out the side trim facing the driver's right leg (left hand drive) and use a small screwdriver to push it out. Reattach all six clips to the long plastic tabs and you should be good to go.
@jonathanurs2 ай бұрын
Yes, thank you for adding those details. I realized there were six at a later time. Glad to be of help!
@BrianGadoury5 ай бұрын
Great video! The B9 SQ5 console is extremely similar to this, so your video helped me be sure I was pulling on the correct things in the correct spots when doing my 2023 SQ5.
@jonathanurs5 ай бұрын
Glad to hear that! Thank you.
@davewes693 ай бұрын
Great video man. Thanks for doing this. Installing mine this weekend.
@jonathanurs3 ай бұрын
Awesome :) Glad to help! Wishing you an easy install
@davewes693 ай бұрын
Went smooth as silk man!
@jonathanurs3 ай бұрын
@@davewes69Glad to hear!
@AndrewTa5308 ай бұрын
Great video. This is a 30-45 min job.
@jonathanurs8 ай бұрын
Appreciate it! Yeah that sounds about right, but it can def be done in 20min.
@Krakaklat Жыл бұрын
Thanks for the video, really helpful !
@jonathanurs Жыл бұрын
Glad to hear!! :)
@AndrewTa53011 ай бұрын
did you go with glossy or matte?
@jonathanurs11 ай бұрын
@@AndrewTa530This one is the glossy carbon fiber
@anthonyzapata446110 ай бұрын
Where did you buy that
@jonathanurs10 ай бұрын
@@anthonyzapata4461 Link under video but here you go :) - bit.ly/3LFwzBi
@KunalGautam1018 ай бұрын
Thanks for this video! I've been looking for a source to help me remove the black glossy piece so I can wrap it in matte carbon fiber
@jonathanurs8 ай бұрын
Glad to be of help!!! Good luck!
@DzenanKotoric6 ай бұрын
do you know if the B9 trim piece is the same as B9.5, I have 2023 b9.5 but would like to put a non shiny piece from a B9?
@jonathanurs6 ай бұрын
Yes, it will work. Mine is a 9.5 as well. 2022 RS5 here!
@alexandr92157 ай бұрын
Where you get Alcantara shift knob?
@jonathanurs7 ай бұрын
It’s OEM from the RS6 or RS7.
@lucasbaer11933 ай бұрын
I have a '22 S5 Cabriolet. I ordered the trim piece a long time ago but it has just been sitting around. On the Cabriolet, the little pocket that you lift up the rubber mat from to access the very first screw you remove, is not there. Instead that is where the controls for the convertible top are located. I cannot find any information on how to go about removing those controls so that I can remove the rest of the console and install the new trim. Any suggestions?
@jonathanurs3 ай бұрын
Hmmm…I thought the convertible controls were up by the rear view mirror. Is everything else the same? If so have you tried prying off that section? It might be the same. If you can attach a picture of it maybe I can help.
@larsphilipp686921 күн бұрын
Hey, there isn't any screw unter the controls, Just Pop the whole trim Up.
@lucasbaer119321 күн бұрын
@@larsphilipp6869Just saw your first comment. It is the first screw you remove at 1:07.
@lucasbaer119321 күн бұрын
@@larsphilipp6869are you saying it isn’t there on the convertible model? do you have a source? I have tried popping the carbon piece but it definitely feels like there is a screw in the aforementioned spot
@97GSX979 ай бұрын
Where did you find this carbon trim piece?
@jonathanurs9 ай бұрын
EuroZoneTuning.com link to item is in description
@amedaius84927 ай бұрын
I dunno, although the piano black is a pain to keep clean and in good shape, going with carbon fiber has too little contrast imo. I think a satin finish black or maybe some fine black woodgrain would be a bit more elegant looking. I do like the carbon fiber in the stock interior but it needs to be broken up.
@jonathanurs7 ай бұрын
It’s a basically a race car. Carbon fiber is the way to go for the RS5 without a doubt. If you have an A5 or S5 I agree.
@awaahaab8 ай бұрын
It says out of stock.
@jonathanurs8 ай бұрын
I know they make them in small batches so keep an eye out for one. You can also email them