Opel Astra 1.6 Z16XEP HSFI 2.4 ECU repair

[@vegapiratradio]

дружище, в натяжку нельзя паять, иначе оно быстро отломается. надо оставлять небольшую петлю!

[@abduelhadiwaer7906]

شكرا جزيلا لك مهندس ..

[@josefraga5479]

Hello, very good video, you are very good at ECU repairs, two questions, one what type of tin do you use, ami never stick the wires and the other is your poses, internal information of the components to know who controls the output of the coils and pulse of injectors.

[@vintopin]

good work again friend!

[@campbellmorrison8540]

Thats the first time Ive ever seen bonded leads used in an ECU and the first time Ive seen them repaired. I would love to know if the repair actually worked, why did they break in the first place? I assume you are using high Silver content solder or those silver pads on the thick film circuit will get absorbed?

[@shane_w_1326]

I work in a factory that makes such ECUs. The Bonding wedge was VERY used and sshould have been replaced ( from the looks of it ) about 200 or 300 ECUs before this one.We have sight inspectors in-line to avoid such mistakes.

[@alexp.1989]

What temperature are you using for solder tip and fan?

[@خالدالكاديكي-ل5ف]

عمل جيد يارجل .

[@michaelmichael4119]

Pls can you come to Nigeria

[@promax_works]

what wire

[@checkupaz]

Good work pro

[@BorisRomac]

do You have shematics? someone work on ecu before so I dont know are wires correct soldered. tnx

[@ernandejesus1641]

❤❤

[@tonehvalic6066]

nice work!😁

[@leehooper7317]

So why does it cost 1200 dollars for such little work good roart mate ..

[@LuckyJalala-lv9zj]

How to repair a corsa gamma pocket computer box

[@michaelmichael4119]

We need you in Nigeria

[@ericarellano9133]

can you help me to repair my ecu astra g z16xe thank you

[@leehooper7317]

Brother the hardest thing about this job is getting the silver cover off that black sealant is a bitch persist with a hot sharp small knife for hobbys just use existing broken wires clean sand clean flux and solder too easy i did my own on the first go and saved 1200 dollar's 😅

[@AhmetBayil]

What is the name of the silicone?

[@leehooper7317]

It's electronic gel and what you take out won't effect anything ok bro

[@ZenebeworkAsmareTebeje]

thanks for sharing, please can you send me parts to Ethiopia ?

[@a2exxhd671]

what are you using for the wires ?is just regular flux wire ?

[@leehooper7317]

It's a little harder than the normal stuff but any good silver solder would be fine

[@CristianCaracuda-o9y]

Aș dorii sa repar un ecu Opel Astra g aveți timp cat costa și un Nr telefon

[@leehooper7317]

11,1200 dollars mate

[@N.D.J.S.]

these ecu's are crap🤮