Budget BIG Brembo Brake Kit Install For Our 4th Gen WS6!

Рет қаралды 9,936

Күн бұрын

Пікірлер: 90

@Loucfr 10 ай бұрын

Possibly the best bang for buck brembo break swap on any car. I got two of these calipers from Canadia for $70. Though shipping was like $45 but still well worth it.

@Autofaze 7 ай бұрын

That is exactly why I went this route. Good stopping is typically expensive but not with this kit. You can save a ton by using c7 blank rotors instead of the ones that I used! Thanks for watching!!

@mikeacuna6077 26 күн бұрын

What are the options for the rear? We did the CTSV 6 front and 4 rear on my daughters G8 GT, but that kit has almost doubled since we did hers.

@jaymeramirez7435 6 ай бұрын

Good to know. I plan on buying me a 4th gen F Body. And I planned on doing this upgrade. But was thinking of the newer Camaro calipers

@Autofaze 5 ай бұрын

This setup was cheaper, im glad I did it! Thanks for watching Jay!

@StreetbeefsScrapyard 5 ай бұрын

Appreciate you making this video. Thanks for putting the links in the description also, could you specify which parts we need to buy multiple of? I get the calipers are separate, but do the rotors and pads come in kits to conver both front wheels, or do i need to order 2 of them. Also with the bolts, is it 3 for the passenger and 3 for the drivers side?

@Autofaze 3 ай бұрын

It honestly all depends on where you get the parts from. Some do and some places don't. Appreciate you stopping by!

@SecretBachelor Жыл бұрын

Travis that’s some much needed stopping power for that BEAST! 🍺😎

@Autofaze Жыл бұрын

appreciate you checking this one out!

@PotentialGaming 4 ай бұрын

fire man there’s also the 17/18Z from the Audi q7,Porsche cayenne and Volkswagen touareg from the mid 00’s was looking to get those

@Autofaze 3 ай бұрын

Nice!!! Appreciate you stopping by!

@kyleduquette9066 Жыл бұрын

Part numbers please. Very very tempting. My zl1 has brembos and I added brembos to my Silverado ZR2 and they both are great. Need this for my 00 SS.

@kyleduquette9066 11 ай бұрын

Interesting, looks like the ATS 4 piston are the same as the Camaro Brembo 4 piston…. Can’t confirm thou.

@Autofaze 7 ай бұрын

Hey Kyle! check the video description, thanks for watching! This car stops amazing now :)

@angelsotelo9315 6 ай бұрын

Great videos! Was wondering if these would work for the front and rears on a 94 z28 ? And if any additional work would have to be done? I’m assuming it wouldn’t just bolt right up

@Autofaze 5 ай бұрын

You would need spindles from a late 4th gen to make it work I believe. Fronts only, just run good rotors/pads for the rears. Thanks for watching!

@RobertDominguez-z2q Жыл бұрын

Travis, could you run shorter bolts to prevent the bolt from hitting the rotor?

@Autofaze Жыл бұрын

I wanted to stick with GM bolts 🔩 plus tons of guys running a washer on ats and ctsv calipers on 4th gens. It didnt seem like a big deal to me. Thanks for watching Robert!!

@Aph87 10 ай бұрын

or just grind the bolt down lol

@scottg7875 5 ай бұрын

Do you have a part number or a size for the caliper bolt washers that need to be grinded down to fit.

@Autofaze 3 ай бұрын

I do not recall, I took a bolt with me to Ace Hardware.

@bogdas1990 11 ай бұрын

Do you happen to have a list with part numbers?

@Autofaze 7 ай бұрын

Bogdas!!! check the video description, thanks for watching!

@jose89ss78 Жыл бұрын

Do you have part numbers for calipers and rotors?

@Autofaze 7 ай бұрын

Jose!! check the video description, thanks for watching!

@kevingough3575 9 ай бұрын

Sweet video. Any luck on a parts list with possibly part numbers?

@Autofaze 7 ай бұрын

Hey Kevin!! check the video description, thanks for watching!

@DaMadLib 9 ай бұрын

Could you have gone with the 14 inch Camaro rotors

@Autofaze 7 ай бұрын

If I recall you have to do something to make those work with these calipers. Thanks for watching!

@cheward8228 Жыл бұрын

Travis, love the set up. Is there anyway we can get the parts list!!!

@Autofaze Жыл бұрын

I need to get on this!! Let me know if you still need it

@michaelarreazola2851 10 ай бұрын

@@Autofazepart list needed! 🎉

@DaMadLib 9 ай бұрын

@@AutofazeI need it…including the brake lines

@ncamber14 8 ай бұрын

Did you have to use crush washers on the banjo bolt? It didn't have them on the stock calipers and the new banjo bolt did not come with them ... assumed they would if needed. The banjo bolt (14100 Doorman) made it seem if you read the back washers would come with bolts if needed.

@Autofaze 7 ай бұрын

Always use crush washers, I reused this stock ones if I recall! Thanks for watching!

@jaymeramirez7435 6 ай бұрын

Every time I change pads or rotors on my daily … one side goes smooth. The other side is a wreck. 😂. Never the same side

@Autofaze 5 ай бұрын

I see that always too on 2 or 1 piston brakes! Thanks for watching!

@undrgrnd.nj2k 6 ай бұрын

hey Travis. when I go to the link for the caliper bolts I get the caliper kit instead. can You shoot edit in a link to the caliper bolts? unless that’s included in the caliper kit?

@Autofaze 6 ай бұрын

It is not, this has been updated! Make sure it is part number 11611085

@undrgrnd.nj2k 6 ай бұрын

@@Autofazethank You sir! ordering today

@nathank4148 Жыл бұрын

Are those calipers the same as the c7 corvette base calipers?

@Autofaze 7 ай бұрын

Good question, it has been to long since I researched this and I am to lazy to google it HAHAHA

@bobd9911 Жыл бұрын

Now it's time to put some Brembo four-piston calipers on the rear

@Autofaze Жыл бұрын

It's is not needed on 4th gens due to the brake bias. Throw a good pad in the rear and roll!

@bobd9911 Жыл бұрын

@@Autofaze I'm already doing it

@jasonr.624 Жыл бұрын

Is your washer very thick? Or just standard washer thickness? Thanks. I have these already waiting to go on my fbody.

@Autofaze Жыл бұрын

I literally just went to Ace Hardware and bought the standard washer, do not over think the washer part! Just make sure it spaces it out far enough

@jamesbirch3952 10 ай бұрын

Parts list ?

@Autofaze 7 ай бұрын

Hey James! check the video description, thanks for watching!

@ridingwithslick9097 7 ай бұрын

So no spacers for the wheels?

@Autofaze 7 ай бұрын

no spacers on our setup! Some wheels will need them though! Appreciate you watching!

@primalphatman Жыл бұрын

Weird question, but would this kind of setup work for the 95 LT1? Id assume its similar but wanted to ask

@dazombies101 Жыл бұрын

Hey! If you haven't figured it out yet, the answer is no. Most of the OEM brake upgrade options involve swapping to the 98-02 LS1 spindle. However, the 95 LT1 bearings/hubs work with the 98-02 spindle.

@Autofaze Жыл бұрын

You would need to switch to ls1 front spindles for it to work, thanks for watching!

@primalphatman Жыл бұрын

@@Autofaze I appreciate the responses. Thank you for the info, I'll work into getting more stuff for the swap then

@apontiac346 Жыл бұрын

Very trick could you supply me with the parts list please

@Autofaze 7 ай бұрын

Thanks! check the video description, thanks for watching!

@flexo.__ Жыл бұрын

What Brembo blank rotor were you referring to ?

@Autofaze Жыл бұрын

Brembo makes blank rotors (regular rotors, not slotted, ect) aka Brembo blanks!

@lazylion420 8 ай бұрын

ok so obviously the physical upgrade is great, but I don't want my WS6 to be wearing shoes that say "Cadillac" or "Corvette" on the side. everyone does this C6/CTSV brake swap on their Firebird but how can you delete the advertising and get a clean looking caliper?

@Autofaze 7 ай бұрын

You can totally sand and paint these. I have Brembo stickers some where in the garage to do just that. It really confuses people with Cadillac brakes currently LOL. Thanks for watching!!!

@gabrielfranjul9278 10 ай бұрын

No other mods needed? ABS working?

@Autofaze 7 ай бұрын

Nope! I chucked the ABS a long time ago, it should work fine if you have it!

@tenehaglendening9246 Жыл бұрын

Is a wheel spacer needed? Thanks in advance

@Autofaze Жыл бұрын

For our weld wheels no. Most factory 17s should clear. 16 factory wheels probably need a wheel spacer. Appreciate you watching!

@korbenharmon5399 8 ай бұрын

I need the full parts list my guy!

@Autofaze 8 ай бұрын

Your in luck!! Im doing it Sunday 💥🎉🎉

@korbenharmon5399 8 ай бұрын

@Autofaze let's go! Appreciate it I'll be checking back!!!!!!

@korbenharmon5399 8 ай бұрын

@Autofaze thank you sir! I'll be checking back!

@js92css Жыл бұрын

Where is the parts list on here thay was promised?

@Autofaze Жыл бұрын

I don't remember saying the word promise. Unlike most automotive channels, I work 70+ hrs a week. When winter comes, I'll get the time to put the list together. Appreciate you watching!