Automatic Water Tank Level Controller Using Arduino With Code and Circuit || Proteus Simulation

[@sweetyms3766]

Sir this is good video i want do it for exhibition and i purchased all the components and i have tried same as like your steps but relay button is getting on off, on off and lcd is not displaying any word also please help me sir please

[@thebrightlight9472]

Use separate power supply for Water Pump (if doing it practically).

[@amininja]

You just saved me with this

[@thebrightlight9472]

My Pleasure

[@AditiAmol-p2o]

sir isme library he add nahi ho rahi hai aurdino main kya kare

[@thebrightlight9472]

Konsi library add nahi ho rahi.?

[@clementdakubu4186]

Please can you help me in opening the .dsn file for the water circuit.

[@thebrightlight9472]

This (.dsn) is the Proteus 7 file and you can open it with Proteus 7. If you don't have the Proteus 7 then please download it from here and use it. If need any help then let me know. Thanks kzbin.info/www/bejne/e4WQpYd8l9Zkhac

[@atieno]

Hello, if I'd like to add a switch and a buzzer and motor driver how do go about it? Would you mind sharing the code?

[@thebrightlight9472]

Thanks for watching, yes I can share the code and circuit. Can You please contact me on Facebook, so then we can discuss your case and I can make the same circuit and code that you want. Here is my Facebook Page Link: m.facebook.com/sparkeeprojects

[@ROZUFF-x3s]

it would be helpful if you give us component details

[@thebrightlight9472]

Ok

[@GuruTamatam]

iam doing practically lcd connections same as above

[@GuruTamatam]

iam doing same connections as above lcd not displaying and ultrasonic sensor are heat to much so what do

[@thebrightlight9472]

LCD have 2 more pins practically (+, -) you should to connect these two 5v dc supply and check the ultrasonic sensor pins properly check the (+, - etc)

[@maisajazba2878]

Just add :lcd.init() ;​@@GuruTamataminside void setup loop

[@zafarullah9841]

Best technics

[@thebrightlight9472]

Thanks for Appreciation.

[@GuruTamatam]

can i do with this project to add SOLAR. please tell me about solar

[@GuruTamatam]

what i can do change in this project to SOLAR

[@thebrightlight9472]

Use Solar System as its source

[@Mahijaddu0708.3]

​@@thebrightlight9472iam using solar source how use battery storage and how connect to motor

[@thebrightlight9472]

Connect solar to battery and then power up the circuit with battery

[@Mahijaddu0708.3]

@@thebrightlight9472 solar to battery to motor

[@chandru91]

Bro can i use arduino pro micro instead of UNO

[@thebrightlight9472]

Yes, You can use.

[@DrisyaK-r5o]

Code is not able to download

[@thebrightlight9472]

Kindly download the file available in video description, then open it with WinRar software.

[@1V4xNoONE]

HELLO SIR IF I MAKE THIS PROJECT IN REAL WILL THIS WORK ?

[@thebrightlight9472]

Yes it will work

[@raystonrizwan7800]

bro i need little help please i had worked with aurdino and raspberry multiple projects only copy paste i can't code...can you please add bluetooth module in it so we can see the details on android app and add a little speaker to low water warning please thank you❤

[@thebrightlight9472]

Will try to add these features as well in near future.

[@raystonrizwan7800]

@@thebrightlight9472thank you very much brother appreciate it..i found the project on iotcircuit hub using ESP32 dev kit its exactly i was looking for only thing missing for me is dry run protection and a speaker to speak at trigger level (low) instead of buzzer...can u please look into this for me 🙂🙏🙏🙏

[@raystonrizwan7800]

@@thebrightlight9472bro where can i reach you my comment gets deleted just after i add it

[@thebrightlight9472]

Sounds can't be added in Proteus Simulation.

[@raystonrizwan7800]

@@thebrightlight9472i am taking of ESP32 devkit can sounds be added in it and dryrun protection too...

[@DrisyaK-r5o]

So please help to get this code

[@thebrightlight9472]

The file in zipped with WinRar so please unzip it with WinRar software.

[@thebrightlight9472]

Download from the description

[@sriganeshreddy-s7e]

hello bro i need help about this project replay fast

[@thebrightlight9472]

How can I help you?

[@assosiateengineermuhammada1788]

code its not working

[@thebrightlight9472]

Watch the video again and follow all the steps properly. Everything is working.

[@assosiateengineermuhammada1788]

@@thebrightlight9472 ma lcd pr word wecome show krwana chata ho to programing me kiya write kro?

[@thebrightlight9472]

Iss video ko dek lo. kzbin.info/www/bejne/laGtc5mMidKSosk

[@assosiateengineermuhammada1788]

@@thebrightlight9472 ma esi water wali videobpy welcome show krwana chata