What Order to do Projects on your Street Cruise or Show Classic Car Episode 229 Autorestomod

[@mikespain8655]

Knowing what your end goal is, daily driver show car, etc. is key. Seems like too many go for perfection and overdo it in the beginning, and the end never comes. The boxes pile up, along with the dust, and motivation goes by the wayside.

[@AutoRestoMod]

Probably it really boils down to, like even us, a solid case of "while we're here." LOL

[@DavidPlass]

"Keep it moving" - great advice.

[@Jammer0825]

This really helped me out!! I am restoring an all original 70 gto convertible that has been in my wife’s family since 1973. Now I have some direction!!

[@AutoRestoMod]

Glad to help!

[@gabrielortega921]

Thanks! I really appreciate this video!

[@donboggs3880]

As usual, your videos are very useful...wish I had seen this 10 years ago. Just now getting back on the 60s Mustang. Thanks for sharing information!!

[@jeff95519]

The last thing I did during my restoration on my 1968 Mustang Coupe was to install power disc brakes (Kelsey Hayes four piston calipers). What a difference with pure driving pleasure knowing you can stop and it's sooo much better on cruise night when your on the brakes more than the accelerator.

[@bobbyread]

This is great information. My next project, a '78 Firebird, is just about ready to start, so this is perfect timing.

[@mbcb8476]

very good show, Jeff. I have been working on my mustang since 91 and I have never been told what you have provided here. I wish some had said this. Very good info!

[@newhomemech]

Just bought a 1980 chevy big 10 for my first project. This was super helpful in guiding my plan for this build ! Thanks !

[@ClintonC1991]

I'm planning on doing rust prevention/repair, suspension, weatherstripping, interior, electronics, engine swap, and paint

[@frankdipino3628]

Perfect! Restoring my 71 Firebird Formula that I have had since the 70's and this is exactly what I wanted to know. Plan on having steps done but I did not realize that each step is generally done by separate shops, paint and body, restomod suspension, interior and engine "shops"AND that it is going to be up to me to sort of coordinate. Video framed the steps for me, THANKS!

[@AutoRestoMod]

Glad I could help!

[@borg386]

All good stuff there! thanks for posting. I have a 68 cougar my mom gave me. Everything is new! Only problem, it's all disassembled. I don't even know where to start.

[@AutoRestoMod]

Just do a little bit along. I like working inside out unless it needs paint.. If it's just an assembly job I work from the interior to the outside.

[@borg386]

@@AutoRestoMod good advice, thanks ! Yes, brand new paint already. Hard part for me is the wiring because the entire dash is disassembled, and the putting all the glass back on, because it was all taken off for the paint job. Thanks again!

[@RIPbiker13]

Great video! My truck, a 69 f250, much like the F100 you're currently working on, is just going to be a driver. That said, I've pulled everything off the frame, redone the chassis, and I'm working on rust repair on the cab. The entire process is on my channel. Although it's a driver, it needed more than what I could have done and kept it on the road at the same time, at least, at first. It'll be going back together ratty looking, but safe and rust free.

[@tree20af]

Thank you for the full breakdown. I'm buying a 67 dodge charger and will restomod it. Your video put my plans into the right direction

[@AutoRestoMod]

Glad I could help

[@stevephillips2685]

If you take the front end completely off, but new bolts and clips to put back together. It's. New and makes it so easy.

[@Boats29]

Great video its funny when I first started this hobby I always wonder this. Thanks

[@chuckbaxter5909]

I am just starting a full restore on a 49 GMC 250. You just saved me a lot of money because I confused a daily driver with a show quality truck! Back to the drawing board! Ty for your video!

[@AutoRestoMod]

Glad to help

[@reaperronin8898]

Great Advice ! an video .. .. I just wish your words of wisdom came 10 years earlier... lol... As you said, my 67 GTO started out as a just a really nice driver.. ! ... For some reason,, Or Some Force, it slowing materialized into a full body off restoration... Every nut, bolt, and washer,, you get my point.. Just finishing up on it now,, AND still do not understand how it got away way from me , as it did... Great Video,, Great Advise... 👍

[@AutoRestoMod]

We never do either...

[@zackmassey8258]

Awesome advice!

[@PrHovey]

As always great video! Agree re the crate motors, these days they are so cheap its not worth building your own HP/$ but Electric man! 40 year old wiring loom's - If you are gutting a car they need checking/fixining/thowing in the bin before you start bolting bits back on... Love the rustoleum tip., how may times have you seen rust coming back through DIY repairs painted with undercoat!

[@hiimjiraiya]

always love your videos helps me out so much. keep up the good work.

[@cuzz63]

The weekend work standard is golden...those things that take longer than a weekend is what kills so many builds...also people overestimate their skills and underestimate the amount it costs..sometimes you have to bite the bullet and pay the pro to get the work done.

[@AutoRestoMod]

Tis true!

[@paytonmoser8330]

This is what my dad and I are struggling with currently, started a 68’ Barracuda resto and during disassembly found that 3/4 frame rails are completely rusted through. Two can be bought one has to be fabricated. Rear right quarter panel also needs to be cut out and replaced. Still deciding whether we attempt both on our own vs paying a shop. Both take a fair amount of time especially to do the right way.

[@mcinkyt]

An excellent video presentation

[@samkemp5081]

Good show Jeff. Working on a 68 and was wondering the same thing. Unfortunately we have to do floor pans so car is still setting.Good Info. Thanks

[@arcorob]

GOOD TOPIC ! I differ a bit on order though because I think it depends on other categories and current condition. For example, I am restoring a 1966 Mustang Coupe. And I have about 20x22 working space (plus a bit more for storing parts). The cars driveline is all set so I would not dream of removing but then again, I am not going for concours..lets say I am going for PRE concours..post daily driver LOL... So from there, yes, safety first which means a complete brake job (drums kept but 2 bowl master), verifying the suspension, etc. Driveline, trannie, driveshaft. Then, chassis refurb in terms of derusting, sealing, etc. Checking all lines (brake and fuel). Mind you, the interior is already gutted and except for painting the dash, it will be LAST or darn close. Now all of this I am doing from FRONT to back. In other words, I don't move from the engine box until its done. Same with the chassis. then on to the trunk. Tank removed. Everything is wire brushed (manual and power), de-rusted if present and sealed. Now I have peace of mind the foundation is solid. What I am saying is I do the heavy lifting no fun work first. Windshield out, then back window, Now its going to get good. Now I get t do what I want...oops ...forgot...working on the windows while the doors are STILL IN...Much easier while they are vertical. Okay, now fun stuff. Body work. Stripping, coating, priming, sanding, repeat...LOL...Now I can paint .....and now I can move to the interior. Headliner, door inserts, carpet, etc etc. Glass back on. Sorry for the long post..what I am trying to say is it really depends on past daily driver but not concours, where you started....total rustbucket or part way there... Thanks though ..watch ALL your videos.

[@anthonywinrow9453]

Thank you that was great!!!!!

[@jimhiscott2918]

Safety is the obvious. The first mandatory step for my past 20 years of restoration is complete gut and strip to locate every spec of rust that can be found. Absolutely pull all the glass out of the car. During this process be extremely gentle with every single thing you touch and remove. Never assume you can replace anything. Catalog, box, bag and label everything you remove storing the parts in a clean and climate controlled environment.....thats my tip before even watching this video. Now let's see what the host says.

[@AutoRestoMod]

Good points!

[@obsessivegarage921]

Amazing video. Really helps put everything in perspective. However sometimes the 1st car and 2nd car build options get mixed together. I think thats where I am, weekend car, sometimes drive it several days a week for fun, trying to make it look pretty nice. But want to still not worry about the rain. Etc. Thank you for the video

[@AutoRestoMod]

That is the hard thing. how to build it so that you don't get grumpy when the rain hits the windshield at work. I'm struggling with that.

[@donaldcurtis9229]

I restore my friends 69 Corvette you know one Bay garage do you eat off the floors took a year and a half we are very dedicated it was a show worthy car

[@hughphillips67Mustang]

I'm working on "redoing" my first cruiser 67 mustang. Body and paint is in excellent condition from the previous owner. But they lacked doing the floor supports. So the undercarriage needs work that will require destroying body work and paint already done. They did your list backwards. Now im trying to fix it on a shoe string budget. I'm trying to do the smaller jobs, and pretend the big jobs don't exist. When in my mind.....stressing. it takes the the joy and fun out of the entire project. At what point, is it good to decide to just walk away, take a break, and come back to it later?

[@flyer615]

Good show, Jeff. I've been struggling with those questions for years. Currently working on a 67 Camaro convertible which started out to be a driver, but has taken on a life of its own. Currently, it looks like a pig on a spit (no so much like your chicken on a rotisserie). My problem has been that, the farther along it goes, the farther I wish to take it. Keep up the great work, friend!

[@towniepats4409]

Did you finish the Camaro?

[@flyer615]

@@towniepats4409 Yes. RS clone, LS-1 engine, an 6-speed manual transmission. I just tried to post a pic. No go. Black with orange rally stripes.

[@towniepats4409]

Good for you! I would love to see it.

[@georgespangler1517]

First thing I do is get wiring in good shape and then the mechanical.. next frame work if any then body and last interrior.

[@AutoRestoMod]

Good plan of attack!

[@rudy_6776]

Do you remove the glass when you send it off to paint?

[@victoriagriffin8996]

I'm an automotive painter so painting the car will not be an issue for me, but having a place to do the rest is a problem.

[@eliinthewolverinestate6729]

Safety first. I keep a build bible of what has been done. Tires and brakes don't go cheap your life may depend on it. Roller paint job works good for floors and other places that may rust. I got a wagoneer it goes to club events and trial rides and mustang goes to drag way. The 460 in the fox body gets attention. The fox body is cheap stripped roller. My 10x10 space is hard to work on motorcycle on let alone a full sized vehicle. Had to build shelving for trim off wagoneer. Get on that rust it will not get any better with time. Don't be like me and have too many projects and budget for only part of one.

[@donaldcurtis9229]

Make the car safe whatever you do make sure you can drive it everyday

[@erichernandez8431]

Awesome breakdown!

[@AutoRestoMod]

Glad you liked it!

[@georgespangler1517]

I have 8 classic cars projects I've collected over the years and don't know which way to turn now

[@AutoRestoMod]

Feeling that! we have sooo many projects it makes my head hurt.

[@Frazetta63]

Everyone is aware of safety...just explain the steps...(reason for video)

[@AutoRestoMod]

I beg to differ.

[@Frazetta63]

@@AutoRestoMod what people are looking for is..."you should start with blank, proceed to blank, proceed to blank, and proceed to blank". I watched about five minutes of the video all that was repeated and repeated was "safety". That's all fine and dandy but what were the "steps" that were supposed to be covered? Most are old enoughto know about "safety"

[@HiroNguy]

Step #0: Clear out a space of the same volume as the vehicle you're intending to build and start piling $100 bills into it. Don't even consider feeling about thinking of which vehicle to buy to restore until that volume is packed solid to the ceiling.

[@davecam4863]

Paint jail, in the case of my project 69 Cougar...that was like 3 years.

[@AutoRestoMod]

It can definitely suck up some daylight...

[@jimmyalayon8381]

David Higgins Hey Dave my project is a 69 cougar also, I have a donor car to put on the shell car I purchased that came from California, I'm not sure if I should do the undercarriage did you ??

[@christiannelson4465]

I wish I had seen this video 15 years ago...

[@donaldcurtis9229]

Yeah my car is all original

[@tonymorris8789]

Paint and body first.

[@AutoRestoMod]

I kinda agree.

[@donaldcurtis9229]

I have a unrestored 1982 Chrysler Fifth Avenue driver daily driver I go to car shows the car is showroom condition I get beat by older cars that say they're unrestored and they are not I have all my little Stone chips on my car interior is immaculate car is almost showroom condition they just passed me by they don't even know what to look at that

[@donaldcurtis9229]

New brakes new brake lines master cylinder wheel bearings everything

[@donaldcurtis9229]

Tore down the engine all those seals and gaskets towards the transmission down it don't take that much just have to be a little bit resourceful don't make your expectations too high too high

[@abelthesaint]

💪👍

[@donaldcurtis9229]

I restored two show cars you just have to be a little bit resourceful

[@chrisstyle405]

Covid shut my car restoration down.

[@AutoRestoMod]

That has happened to a lot of folks.

[@cuzz63]

@@AutoRestoMod It also seemed to energize alot of people. All of the carshows I have attended this year had record numbers of cars...people had more time to work on them.

[@dioxpestcontrol-mikerobert6831]

Too many adds, sry i know it makes you money but it's irritating and makes me not want to stay on the Chanel. Good info though.

[@AutoRestoMod]

Sorry, KZbin added their ads to my stuff and I can't fix it on 400 plus videos.

[@backthatthingupyoyoy]

More FUNNER? Learn and SPEAK much ENGLISH? You must be from PA or WV.