AUX CABLE INSTALL + CODING BMW 5 SERIES E60/E61 *DIY/HOW TO*

[@FuelledLife]

Restoration is underway! Hope this helps any fellow BMW saver. ☁️💡 Any questions about tackling yourself, let me know.

[@MarcoOlivares92]

I know this video is older but THANK YOU. By FAR this was the easiest guide.. for some reason i could not get it to work. But THANK YOU THANK YOU. I added an android 12 aftermarket head unit and this was the video that finally helped me 😭

[@FuelledLife]

You’re very welcome Cap! Cheers for watching.

[@suezeeq12]

Oh my god for days and days I've been trying to code this and getting multiple errors - THANK YOU THANK YOU!!!!

[@FuelledLife]

You are very welcome! Thank you so much for watching and I’m glad it helped. 👍

[@xnorsx]

Nice guide, if someone not like to use manual coding in notepad, you can also use NCS Dummy, witch is made it for that kind of job. In 5:51 where's Mask ecu has read, just open Ncs Dummy, select Chassis (E60 for that car), see in Ncs Expert module name, for example, in video is MASK_E60.C08, next Browse C:\NCSEXPER\WORK\FSW_PSW.TRC, scroll down find AUX like AUX_IN and tap the aux checkbox to on. On bottom find Export FSW/PSW, and click first option. Close the Dummy, when prompt comes in, press CANCEL not OK. Next in Ncs Expert, change job and execute ecu, like in 8:21. In Dummy not change anything else if you do not know what are you doing.

[@FuelledLife]

Awesome info buddy! Thanks for commenting, it will help a lot of people. 👍

[@noeglz5]

Drilling holes in the wrong place is totally me!😂 cheers good job bruh👍🏻

[@FuelledLife]

Yep, measure once, cut multiple times… 😂😅

[@Usmankhan-te4lb]

Unlimited likes 😍😍😍😍😍😍 now is everything working great sound quality you are genius thank you soooooooo much

[@FuelledLife]

Awesome my man! Your welcome, enjoy the tunes!

[@Usmankhan-te4lb]

@@FuelledLife volume is a bit slow do you have any video how I make it louder. Thank you

[@arranconeroyuka]

excellent video, I hope that I can use to my BMW e60 2004, I'll try follow the steps above all the coding steps

[@FuelledLife]

No problem. This will work on all BMWs from 2003-2005. After which should already be coded. Good luck. 👍

[@lukehill2936]

@@FuelledLife I have a 2006 6 series and don’t have an AUX, I believe it was 07’ that AUX was added to BMWs

[@rodrigomarrafeiro9969]

@@lukehill2936 I went to look for an 535d from 05 and the dealer said it had aux in the center console, and indeed there was an hole

[@connorbarry6316]

Hi bud having nothing but issues with mine bought 2 different aux ports now re wired them had the car coded twice but no luck frustraiting th daylights out of me

[@dannyf625]

Thanks man,this video helped me allot,it works fine. I have a bluetooth dongel instead of a jackplug or usb. 1 little problem what the most people have…the volume is low,but the sound is great. Thanks again for the helpfull video 💪🏻

[@FuelledLife]

Cheers Danny, thanks for watching. Yep, the audio systems aren’t the best in these cars unfortunately. Logic 7/hk should of been base spec!

[@dannyf625]

@@FuelledLife i like the soundsystem,it’s so much better than the E39 what i had before the E60.

[@lewis72]

I've got a '53 plate E60. It's so old it must have been bumper-to-bumper with the last of the E39s going down the line.

[@FuelledLife]

I had an old 53 plate 530d e60 manual. I got it as it had no DPF, (downturned exhaust pipes). They were literally the change over year from the e39. 👍

[@gmdeutsch]

Excellent video! Thank you!

[@FuelledLife]

Thank you so much, glad it was helpful. 👍 thanks for watching.

[@cmd1261]

Hi mate followed this video works all ok but 1 issue I have is sound only comes from 1 side and audio sometimes cuts out so have to un plug phone and re connect and works again

[@diegolobos1775]

I have a E63 but when u open a ncs expert it doesnt show a ncs dumming, but it shows other options and when I press read ECU, the program shows ERROR

[@gowap97]

Hi bro, thanks for the video! Can you please tell me what's that cable that you use at first to connect the computer to the car? Thanks

[@FuelledLife]

Hi Filipe, just a standard Ebay USB to OBD Kcan/Dcan cable. www.ebay.co.uk/itm/385590675882?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ooqcpscxqcc&sssrc=2349624&ssuid=Z7y3URFxTIe&var=&widget_ver=artemis&media=COPY thanks for watching 👍

[@_jovian]

Nice, thanks. I have to try this. I have a 2010 with a mask unit and aux is not working. It just says AUX on my input selection, it doesn't say AUX(audio), I wonder if there's a difference.

[@FuelledLife]

Hi Nick, don’t think there is as my lci cars just have Aux on the iDrive. When you say it’s not working, is it greyed out or can you select it and you get no sound?

[@_jovian]

@@FuelledLife nah it’s not grayed out, it’s white and you can see the like click animation when Try to select it, but it just will just remain on the fm radio and not switch to AUX, I check the cars file too and it’s set to aux aktiv

[@parental.184]

@@_jovian hey i have the same problem also have a sos light with no bluetooth and trying to decide if i should do this or get a fiber loop as i already have a aux port in the center console and the radio says aux just won’t click into it, if you have a instagram pass me you’re name so we can talk about it and try to get a fix!!!

[@_jovian]

@@parental.184 thats the weird thing for me, my Bluetooth still works. If yours isn’t and the mulf fuse in the glovebox isn’t blown, your mulf module is probably fried.

[@daviddudas2820]

So if you plug in the pin conector after the system is will allready realized the aux ? or you have to something else to ?

[@GuillermoMunoz-t3z]

What if you dont have that software knowhow? Or even have that software?

[@yevhenshumakovych9535]

Hi, thanks for the video! I wonder if after adding this option, will it reset all my codings in whole car? In example closing doors after X mph, etc. Thanks in advance

[@parvualex5930]

How u relocate the pins ? I have a black screen after installing it wihtout moving the pins i removed it but its still a black screen

[@yyhbackagain5013]

If you have heated seats this position is not possible because the Mainbord is too big

[@mlohavac1268]

I've done this. But now, sound quality is really poor, no bass and very filtered sound. Any way to get this solved? Ideas?

[@thekingtom]

I've got a e60 m5 I live near Watford how much would I have to pay you to come and do this for me 😅

[@kaloyanyordanov1395]

Yh man for some reason it doesn’t work on mine any ideas , any suggestions will be appreciated. I have installed the cable correctly and it doesn’t work .

[@MrDanilo11]

Will that coding process work on a 2008 5 series with aux already installed? The aux worked just fine but it is now greeted out and cannot select it.

[@FuelledLife]

It sounds to me there is either a cable break between your aux jack - head unit or for some reason your VO has forgotten or lost its aux option. I would check both. It would work but it only adds it. If it’s greyed out, it probably can’t see a connection. Not 100% sure.

[@southeastbushcraft]

Hi Where can I get NCS Expert? Do you have a link, or would a Google search suffice please? Thanks for much for the video, I got cables installed fine, just need to activate the AUX now.

[@FuelledLife]

Hi Alex, see link below. This is where I got all the tools needed. It includes the guide on how to install as well. 👍 www.bimmerfest.com/threads/ista-download-link-no-request.1023698/

[@StudioSasha]

Hi ! Doctor of BMW ! I have BMW 528i e60 2010 M-ASK Champ head unit. I need 100% Off my Welcome chime (gong). and door open signal chime (gong) its to loud for me.If you now how ? Please Help me.. No body now how...Bimer code not work,idrive menu dont have option make sound gong lower..were is this sound startet : cluster mask unit or defferent modul ? Thanks,Best Regards,Alex

[@davegarot1630]

does anyone have a download link for the INPA software? TIA

[@momomo9711]

is this car model same with BMW 520i? and E60? i got this old car from Korea for my trainning drive trying to install aux in this car is this sollution doesnt need soldering iron? just buy that cable 16:04 and connect to behind of the car audio?

[@momomo9711]

after i buy that cable should i arrange the 3 each cable like red lines heres 17:08? how do i know the right and left cable is red or white

[@xwu8147]

Great video! Would the procedure be the same for a 2005 E87 (MASK/CCC) without screen?

[@FuelledLife]

It is the same procedure as on the screen versions. Same MOST system so the cables/pins are the same. Then you just need to code the HU. Thanks for watching! 👍

[@xwu8147]

@@FuelledLife OK Thanks!

[@Valensian20]

Good job man

[@FuelledLife]

Thanks so much Valencian, cheers for watching!

[@RICKYARIADNA]

very good video, it has the link of the programs to use ?

[@FuelledLife]

Hi Guay Guay, link attached, cheers for watching! www.bimmerfest.com/threads/ista-download-link-no-request.1023698/

[@gaming_killz5095]

Can you please help me😅where do I put the white, red and black cables. I did not get it really, can you tell me a bit more please. I was hard to see it in the video.

[@gaming_killz5095]

•••?white •••?•

[@FuelledLife]

Hi buddy! No worries happy to help. Relocate the white and red to the left and right channel and brown/black to ground. See link attached with picture. forum.bmw5.co.uk/topic/109890-aux-input/?do=findComment&comment=1182387

[@gaming_killz5095]

@@FuelledLife o now I get it, thanks for the help :)

[@khalidhalba]

It works for me but the low frequency/ bass is so low which impacts any music with beats. Anyone with this issue and how they fixed it ?

[@jasonheyen6074]

Thanks Crack on!

[@FuelledLife]

Legend! Thanks for watching! 👍

[@aimized1460]

Hey man I saw this video and it looks pretty simple to do. My issue is I have the aux but it is greyed out and I cannot select it. I bought this bmw 328xi 07 but the ccc was dead so I replaced it with one from a e60. I found somebody that does this coding but he wants anywhere from 100-150$ to fix my aux… should I just buy a laptop instead and do this myself ? The software you use is all free correct ? I can buy a laptop for 60$. Should I tackle this alone or just pay up to somebody that knows what there doing thank you

[@FuelledLife]

I would do it yourself to be honest, its relatively inexpensive. Just give me a shout if you need further assistance on getting it set up.

[@greglevesque9602]

Do you have a link for the coding software? I want to add an android head unit to my 2004 530i and like the car in your video i too have no aux option at all on my idrive

[@FuelledLife]

See the link, cheers for watching Greg! www.bimmerfest.com/threads/ista-download-link-no-request.1023698/

[@TheBoomChakaLaka123]

Nice vid! Current M-ASK 2 got replaced, do I have to code the new replacement?

[@aimized1460]

If your missing features I would suggest to code it, but if it’s not missing any features it does not have to be coded unless your running into issues

[@TheBoomChakaLaka123]

@@aimized1460 I have an aux port already (back of arm rest), if the replacement is missing that feature, do I follow the same steps in the video?

[@aimized1460]

@@TheBoomChakaLaka123 your in the same boat as me, in this case yes it has to be coded.

[@TheBoomChakaLaka123]

@@aimized1460 thanks for the reply! Also saw on some forums people get a "Error unit not coded correctly" a fix for that would be pretty handy just in case.

[@FuelledLife]

@@aimized1460 Cheers for the comment guys, like for like they shouldn't need to be coded but as you said to @Igccruz if the feature set is different the module should be coded to match. Cheers for the support guys! Really really appreciate it. I'm teaming up with Andream on a CARPLAY unit in a week or so, so stay tuned for hopefully a cool vid!

[@Usmankhan-te4lb]

can you please share the link for download all software for mac. Thanks

[@FuelledLife]

Using boot camp for mac so it’s windows

[@Usmankhan-te4lb]

Hello again mate, I have done everything successfully installed the aux but there is no sound come out can you help please? Thanks

[@theajfam8727]

@@FuelledLife what is boot camp for mac? What exactly is that

[@MrAlvinNguyen]

Bro could u share inpa data? Thks for u video. Liked + subcribed

[@FuelledLife]

Believe it or not, I’m struggling to get hold of a copy myself. It’s never worked since swapping to a new computer. I need to find my own solution! Appreciate the support though my man!

[@theajfam8727]

How do you download or get those two progams on your MAC? And where do you get the cable needed to connect from laptop to car? Why don’t you show how you hooked up the computer to the car? I just need to know what cable is needed, thanks

[@FuelledLife]

So boot camp is a standard program on mac that enables you to load a windows OS onto your Mac. Found in applications - utilities. Cable was a generic K-can/d-can cable off of ebay. In terms of hooking it up to the car, it plugs into the OBD port and then into your USB port. Then you open up INPA and then ISTA. See link below for the cable I use and Bimmerfest has a wealth of info on all of this. I’ll do my best to answer any more questions. I will try and make a video on how to install these programs this month. www.ebay.co.uk/itm/USB-K-DCAN-Cable-With-Switch-Button-Works-With-BMW-From-2007-2022-/144432238552?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0

[@theajfam8727]

@@FuelledLife your really helpful man thanks for everything!

[@theajfam8727]

@@FuelledLife one more question, do I need to download windows 10? if so, do I need to pay for that?

[@FuelledLife]

@@theajfam8727 you can run windows 10 for free unactivated. You’ll just have a water mark in the bottom corner. No issues with that at all

[@theajfam8727]

@@FuelledLife damn im not able to install boot camp in neither of my Macs one is MacBook Pro 13-inch m1 2020 and the other is the MacBook Air 13 inch early 2014, do you know of a way around it?

[@kaler329]

Can you do this for me please mate

[@FuelledLife]

Sorry Ash, I’m currently working away a lot at the moment so don’t take on work but maybe in the future. Thanks for watching though! 👍

[@pauldownes5345]

That is long winded there must be a quicker and easier way to do it

[@zebrassomas]

help in my case in the 5'13'' minute of your movie. I have GPS but it doesn't show me ZAPPL and if I enter with MASK, then it doesn't show up " CODIERDATEN_LESEN. what can I do? Thanks

[@FuelledLife]

Hi António, thanks for watching! It won’t work with Mask if you have a full size CCC but it sounds to me like you have mask as ZAPPL shouldn’t be on there. What spec is your car? Mask 11? Mask 1? CIC, CCC etc? Size of screen? See if we can pin point it down. 👍