Axial SCX10-2 Trail Honcho $50 Budget Build - Week 7 - Shock Hoops & Voltmeter

[@HarleyDesignsInc]

I regret not explaining the volt meter better in the video. Thats what I get for being pressed for time while filming. When the battery is fully charged the meter will read 12.4v. Depending on where the lipo low voltage cutoff is set, when the meter reads between lower than 10.0v you're battery is nearly dead.

[@YYCRCFabricationz]

Harley Designs - I share quite a few of your & Matt's videos in my Mods, Tips & Tricks playlist on my channel because they're not only interesting & informative videos for my Clients & Subscribers who may not know but also I don't build using plastic or styrene. That being said tho, imho, Model Manufacturers should install voltmeters in every RC, it's just common sense that people want to know where their power is at! Really love that both ya'll are doing this series showing people how to spend less, there's far too many of ya'll that have the Sponsor's backing thinking we're all made of money & can easily purchase expensive mods, upgrades, parts, etc., while 2 of the best channels in the business are going a different road...Thanks!!! Great video again & the truck is looking sweet!

[@hunterthurgood8209]

Things happen, but thanks for the response, you are single handedly the person that got me back in to the rc hobby and specifically crawlers. Thanks for the response though

[@frostbittencanuck5037]

Harley Designs thanks for the reply Sir , what I am trying to determine is where is the scale voltage detector wired to? Frostbitten Canuck 🇨🇦

[@BlackSmithRC]

Awesome!

[@bryanwallace3347]

I haven’t missed one videos,yours or Mat’s! I’ve been subscribed to your channel for a long time and always enjoyed pretty much all of them. Thanks for turning me on to Mat’s channel! He’s pretty talented as well.

[@scalebuildersguild]

Great idea Josh, love the look of that voltmeter!

[@gagecampbell8106]

This honcho is coming out so well. That volt meter is super cool in the factory nav location great idea!

[@kcbunn9239]

Not gonna lie, Josh... you released this video at the same time the Hoonigans released their Daily Transmission episode, so I was torn on which to watch first. Glad I picked this video. You once again have stepped it up with the functioning volt meter and 3d printed parts. Keep up the good work! Can’t wait to see what next week brings to the build off. 🤙🏽

[@scalebuildersworkshop8307]

that volt meter display is such a great little detail. Really loving this video series with you and Matt

[@FrancescoSequenziaSeychelles]

Great idea for the voltmeter installed on an interior as a screen. Always on top Josh!

[@mudguyRC]

That definitely earns some originality points! Good tip on the network cable- I have so much of that. I’d have to put you ahead of Mat’s tire upgrade- good stuff!

[@RUSERIOUS76]

That body is holding up pretty well. I can tell you've been beating on it a bit with how that new bumper is getting character.

[@biff196972]

That digital volt meter is awesome looking, great idea Josh

[@blizzardrc7024]

Cool idea with the volt meter! Great info on the shock tower and panhard. Truck is looking awsome.👍👍

[@RcNickster709]

all diy's are awesome.. adds your own touch to a rig.. voltmeter and the interior DOES look great..👍👍well done

[@IFCKEDAGOATWICE]

The volt meter is actually handy. I’m always checking the volts on my batteries just to make sure it is in the safe zone, and it is a paint to open up the body every time to check it

[@JK-qv8sv]

Those interior figures need some paint! I put a rc switch in my trail truck for remote lights, the switch has a red LED on it so I attached it to the cieling of the body and now the interior glows red when the exterior lights are on 👍

[@pacbeltrr38]

Josh, this series is so successful, because it appeals more to the "every Guy". Sure, several people (like me 😭), can't even do $50 a MONTH. However, between you and Matt.... you're also frequently throwing in free or nearly free Mods!! 👍👍 SURE, you're Harley - most of your Mods are more Performance Based. But you've got some super COOL tricks as well. This Series applies to the guy who can't afford the Hottest Rig, but still wants excellent Performance, and stand apart, cool looks as well. You guys both NAILED IT!! Carmine 🚂

[@codycheesman4161]

That voltmeter is a neat little addition. Very nice!

[@sugarfree850]

I like that touch to the bomber interior. Can't wait to try it on my truck with this interior!

[@averycoffman4057]

That bracket is a super neat idea!

[@08carbonslvr]

The voltmeter is a nice touch! I like the functionality of it as well as the “dress up” feature. Thanks for the awesome idea as I start building out my new scx10 ll. I’d like one of those 3D printed bezels if you would be so kind as to pick me as a weekly winner.

[@tylerpeckham1028]

I always look forward to Wednesdays to watch these and see what's next.

[@ShenRC]

Love the volt meter on the dash! 👍😊👍

[@EvaderKMP]

The voltmeter hack is awesome!

[@tonyholliday2347]

What a simple little addition to add some functional gauges. So cheap too!

[@hemitj]

Love this build series between you & Matt. Also loved your Bomber Budget Build Series.

[@XTHNG1]

Nice work on the voltage mount.

[@mrk8212]

Wow that Honcho is looking great!

[@fastkrt10]

Love this build. Just got my honcho yesterday and can t wait to get to work on it.

[@Slambone77]

Love the digital display!

[@warrenholmes9171]

These are awesome build's. After finding your videos of this build I had to go get myself a honcho rc truck. You guys are great. Look forward to these every week.....TY

[@Drivewaycustoms]

That voltmeter idea is dope!

[@zephgage3694]

The volt meter was really cool I did it a while back on my debolt when I built it similar to the budget build you did that was my favorite truck by far.

[@zackstrait572]

Great video! These budget build videos are the highlight of my week I always look forward to what you and Matt are going to bring to the table for the week

[@squarebodySpringman]

I love the volt meter idea. Im definitely going to be using this idea.

[@BlackSmithRC]

Awesome budget build Josh! I have a few of those upgrades on order. Looking forward to upgrading my newly purchased 10.2 Honcho. Also, I've made a video giving both you guys a big shot-out! MIDWID!

[@sanchoancho6510]

Great video Josh!! Set of Green Vanquish Methods would compliment the Honcho nicely!

[@dragonflyjoyride]

Those are some really good upgrades! Thanks Josh.

[@RockRaceRC]

That voltmeter display thing is really nice.

[@scebird78]

Looks great... these little videos help me with my builds.... used the Tupperware idea for my 5yr olds ecx barrage. Great job

[@catiachick]

Want that navi screen mod. Got the same interior and thats a slick way to add detail to the interior

[@1aview]

I like being able to at a glance see my voltage. I'm gona have to try that. Thanks for the idea

[@connerjakubiak3736]

I like that voltage meter idea! I'll have to get my interior ready for one!

[@dingledisco]

Love the volt meter, practical and looks cool. Good job again.

[@eriercrunners2785]

The builds coming along nicely 👍

[@frankuribe9630]

The volt meter is a great idea especially for trails

[@808wronchonacis5]

Build is coming along awesome!!

[@orvillemoll7604]

What a cool little detail for the interior. Gonna steal that idea, lol....

[@michaelthomas3262]

Great idea with the Voltmeter 🤘🏻 that rocks

[@renobob7781]

Great video again, got a bomber interior just sitting there and a volt meter why didn't I think of that. Much easier than the balance meter in my pocket. Keep up the great work, later.

[@dwaynevleeming4064]

Cool idea with the volt meter!

[@jasonbrunda7957]

Awesome build between u and Matt

[@kennethesser1067]

Nice choice this week I really like the volt meter its a nice touch.Glad the build series is doing so good, it's a great concept!

[@HarleyDesignsInc]

It’s the fourth one of these I’ve done, it was a concept I came up with in 2011.

[@kennethesser1067]

Harley Designs, Any chance I can get a link to the maker of your led inserts on the mattzilla build? I'm looking for the 4" U4 lights. Thanks

[@ricksscalerc2222]

Nice job,the digital read out is a great idea and looks awesome!.thats funny i strip down phone line also to wire leds....

[@excabswap5022]

Bomber interior looks really great! How about a 3 racing winch with commando free spool next?

[@tannersmith220]

You should put the link in the description on where you get the parts!

[@BSalc]

Neat idea on the voltmeter! 👍🏽

[@Exstaz]

That is a neat way to place your volt meter. I am actually gonna do the same but on my deadbolt.

[@treadsidedown484]

Love this series because of the basically free mods and all creativity shown between the two of you. Can you make a recommendation on a 3d printer?

[@stokedmfrc4343]

Sup man , never used styrene before, but I do have some of this material I found at a yard sale, they are these product samples for domestic window blinds like louvres. I imagine that' styrene is much easier to work with but hey! I could put one of those volt meter mounts to use! Thanks for reading my comment.

[@rcvalley8706]

Looking good man! Another brilliant idea!

[@martinbradbury5920]

I love what you have done so far looking good

[@mikeymike3240]

Hi there, that really set's off the dashboard, bringing it to life. You'd almost think it was made for it. lol great video man. ☺ 👍 👍 👍 👍

[@stacygardner507]

the volt meter in the dash is a really cool idea. l may have to put one in my ax-10 scorpion, ty

[@kingscott1002]

Looking good brotha! Loving the volt meter.

[@crazedacresrc9086]

Nice job on the meter, that's really cool

[@kinslersrccustoms6945]

This week is a good one for what you did I was thinking that you are going to be changing the servo soon. Looks great and it is getting stronger all the time.

[@aaronbengston3059]

Awesome idea! I could use a volt meter mount!

[@Scx10diablo]

In the Red oh no! 😉 Great job to both of you, enjoying the build off series a lot! 👍

[@leorichard4449]

Loving the volt meter

[@BullgearRCvideos]

Like the volt meter idea. Maybe I'll put one in my JK

[@anthonyfricks2469]

Getting caught up, I love the volt meter Idea!! And the Super cool T-shirt!

[@whatalias]

Like the upgrade. Think ths bomb interior for sr5 is the next upgrade.

[@tunahunter101]

awesome products would love to have this on my rig

[@stwright318ify]

I think you both are killing it in this series! Everybody's waiting to see who's got performance and who's got the most scale appearing truck. I know you said you were going more after performance, but with little things like the tail light bezels, voltmeter in the dash very cool and the flip a lid kit. Now just some paint or wrap to change the look of the truck. My money's on you for performance. And that's the name of the game and less it's a shelf Queen then looking the most real is best until you roll it down the side of a rock covered hill and lose all your scale touches or break them off. How many weeks are you guys going?

[@sdcrawler8193]

Looking good. I need that volt meter.

[@danielritchey3840]

That volt meter is sweet!

[@blackdiamondrcranch897]

Great and very cool idea I like what you did with the interior

[@souledoutrc8174]

Nice install on the shocks towers they look fantastic and I’m sure it really helps out I think I should do that for my Jeep build. Also volt meter looks dope that is a great idea I always look forward to seeing your videos they are really helpful and nice friendly competition with SBG.

[@Blackeyecrow13]

The Honcho is getting better looking every week. I think you need to add something to the bed area though.

[@Chris_Bumpus]

Love the volmeter! Neat detail!

[@circlekrc3073]

Like the upgrades so far! its looking good!

[@Legoman585]

I think your truck is winning at the moment

[@Campbell96Racing]

Really enjoying the build man, and that volt meter is awesome! I'm planning on doing a Bomber build come spring/summer. That would be an awesome feature!

[@coolasrc]

I would love one of those voltometers they would look so cool in my truck. Will def make a video about it

[@STEVOD313]

I subbed to ur buddy’s channel u mentioned last vid, this is the third budget build I’ve been following,two r $50 a week n also a honch,cool stuff 👍👍👊📹📹

[@chriscampoy7063]

would love to get one of them 3d printed mounts

[@MoiDj22]

I like the dashboard mod! Great idea. Cheers.

[@RCExploits]

Nice looking and functional. Thumbs up.

[@AkagiPro1]

Love your videos!!! Keep up the amazing content !!! Everyone loves install videos haha

[@aaronbolvin7314]

Great touch this week 👍

[@jgeisse7481]

RC Juice has very good servos at a great price!!!

[@shaunshaunk9297]

Binge watching!!!!!

[@sherxiong957]

That's cool never thought about that

[@RCVOODOO]

Build looking better and better. I don't need the volt meter harness just incase you pick my comment. Someone else may need it.. looking forward to next video

[@chappelracing10]

Really need one of them volt meters in my bomber

[@Matthewmaya1]

Looking great, I want to buy one super bad.

[@shanebeekman2228]

Love the build so far would love one of those cases as I don't own a3d printer an the volt meter idea is definitely one I'm going to do great idea mate

[@sethbrown9469]

I'd love to put that voltmeter mount in the bomber I'm building right now.

[@frostbittencanuck5037]

Haha you two guys never cease to amaze me, I have been following both of you avidly👊🤘.. Matt with his mods upgrades not on the scale aspect and you on performance... it's like a big buffet and I take from it what I need ... what works for me..... 😁 did you end up hardwiring it into the existing wiring or is it plugged in to the receiver? Cheers from Calgary Frostbitten Canuck 🇨🇦

[@justinstearns7622]

I want one of those volt meters!

[@bigmac5219]

Awesome HD !!!