I couldn't click play fast enough when I saw it. I wrote a longer take on the video in the axis thread on standupzone. Just as a caveat to anyone else watching this. I bet most of us are not lake foiler's like you. So remember guys. He's in flat water and foiling really small wakes off a jet ski. For example a lot of the prone surfer's I know out here in Los Angeles are all on AXIS gear and the favorite wing for prone surfing is the 900/910. So just use that as a reference point for comparing lake foiling to whichever sport you're doing. He's probably 1 size or so up from what you're used to riding. The black series was designed for wing foiling it looks like and man do they look slippery through the water. Great video as usual. Thanks for all that effort.
@WakeThief4 жыл бұрын
I think you’re right. Thanks for the comment and explanation. I agree they it’s a wing for higher speeds. Quite interested in the potential for lower drag wings. Will be great for this sport.
@Hdip4 жыл бұрын
@@WakeThief oh yeah that reminds me. I kept waiting for the high speed test with this one. You didn’t get to that one?
@WakeThief4 жыл бұрын
@@Hdip shoot. Perhaps I might’ve filmed this before I started doing that test. I can’t recall now. It must’ve just been a miss on my part.
@axisfoils35883 жыл бұрын
Another great video Devon!!! Thanks for keeping the stoke going!
@WakeThief3 жыл бұрын
Thank you guys and all that you're doing to advance this sport and keep smiles on faces!
@MACkiteboarding4 жыл бұрын
Keep up the good work Devon!
@WakeThief4 жыл бұрын
Thank you for all of your collaboration in 2020! Have a great new year! Happy foiling!
@scnomad36264 жыл бұрын
Another great review. I am hoping to figure out what to get for next year’s fun. Maybe all those guys down under enjoying summer will have it all dialed for us before spring! I am also primarily a lake foiler a couple of states east of you but starting to dabble in prone surf and winging so an easily configurable system is important. Please keep up the fine work! And happy new year
@WakeThief4 жыл бұрын
I had the same thought about our friends down under! Thanks so much for sharing your appreciation. Have a happy new year too!
@brucewalls5483 жыл бұрын
Love your videos man! And really appreciate that you try to respond to most comments as well. Would be awesome to see a review on the the BSC1060. This is one of my favourite axis wings for a number of reasons except pumping. I find it quite hard to maintain speed pumping the 1060 for some reason. Would love to hear your thoughts on this.
@WakeThief3 жыл бұрын
I really like it too ... I agree, it didn't glide as well as the 1150, but I felt like it was very similar. I will add it to my to do list. Thanks, Bruce. Happy holidays!
@stevesantagati22644 жыл бұрын
My guess is the black series will “accelerate” when it’s used for the Wind wing. Also, got a bungee ;) will let you know when we set it up here in Maine
@WakeThief4 жыл бұрын
Awesome! Can’t wait to see the bungee in action!
@erlendmc4 жыл бұрын
This wing will be interesting for wingsurfing🤩
@WakeThief4 жыл бұрын
Erlend! Happy new year. I think you’re right. You can see how low the drag was during my pumping speed test. I suspect that will make it fast wing surfing!
@toobmes4 жыл бұрын
Devon, another nice review. But please tell us more about the "improvised launch." Is this the first time you have used this method? Will you be using it more often? Could this be an easier bungee launch for us rookies? Looks a bit more strenuous, as you have to stand and fight against the bungee. And how do you get your board to sit flat on the water? My board does a wheelie due to the weight of the foil.
@WakeThief4 жыл бұрын
I’ve had to do this type of launch for the AXIS 1000, if I recall correctly. I suppose I will have to use for any wing that is tuned to high speed performance (poorer low speed lift) and is too small in area (
@adeeule2 жыл бұрын
Sehr geile beschreibung, danke🤙👍👍👍
@rullywk97464 жыл бұрын
Hi Dev how are you, Merry Christmas Dev. Nice review..👍👍
@WakeThief4 жыл бұрын
Hey Rully - I was wondering how you’re doing! How is the foil coming along? Happy new year!
@rullywk97464 жыл бұрын
@@WakeThief my foil is finish and ready to use but not any wave here and almost every day ia rain Dev. Happy new year to Dev...sukses selalu dan salam hangat dari Indonesia 🙏
@russkielol3 жыл бұрын
I have been watching all of your videos , thank you. What would you recommend for the following sports. 19ft jet boat throwing a pretty good waive compared to its size I can foil it with no hands on 76cm low aspect foil. I need a foil with a decent size mast like 75cm and I need it to curve in the ocean and in the lake. So it has to be able to go little faster not slower
@WakeThief3 жыл бұрын
Thanks, Russ! I'd love to help. Please email me directly with your weight? Where are you located? Do you want to prone surf or hand wing in the ocean, or continue using behind boat only? Any interest in dock start? Based on this, we can spec on for you.
@1JOHNHEARN4 жыл бұрын
Aloha F NY. Do you go with a longer fuselage or shorter fuselage for pumping power and ease and efficiency?
@WakeThief4 жыл бұрын
I find a longer fuselage better. 80cm from the leading edge of the front wing to the trailing edge of the rear wing is my current favorite. I believe the longer fuselage gives a more powerful heave force for a smaller pumping action because the rear wing is further away from the pivot point (mast)
@Finn-nt3jc4 ай бұрын
What about running dock start I weigh about 80 kg thinking of getting the 1050 but the only way to get going is from a running dock start (don’t have a bungee or boat)
@WakeThief4 ай бұрын
Yes. With practice you’ll be able to dock start it.
@davewestfoils2 жыл бұрын
There is a theme developing from the Black Series - bungee launches are very difficult?? Could be difficult to use these wings in marginal conditions when winging.
@WakeThief2 жыл бұрын
Great low speed lift and low drag are often mutually exclusive. This might be the case for the black series. However I do know the 910b has great low speed lift but the area of that wing is quite low.
@davewestfoils2 жыл бұрын
@@WakeThief it’ll be great for our mates at axis to release an 1150 and 1010 in the black Series. Doesn’t seem to be anything with quite as much low end from your tests and others I’ve watched. I’m search for a great light wind option for winging in the black series. I’ve purchased the 1099 so it’ll be interesting to see how it goes with the lower area and reduced cord for slow speed take offs.
@WakeThief2 жыл бұрын
I think you have it spot on. Issue with 1010 and 1150 is the span will reach a point where the thinner black fuselages might become the weakest point in bending and cause wingtip deflection which makes pumping And foil control a bit more challenging. You’re spot on with larger chord for easy takeoff!
@timbyerly33222 жыл бұрын
You did not talk about the fuse length. This would change pumping speed and carving. I also think adding the shim is causing more drag. Thoughts? The red and black fuses are not the same length. It's a little confusing.
@WakeThief2 жыл бұрын
Longer fuse increases the tail volume which provides pitch stability, so the pumping cadence slows. This usually helps increase pump duration. If you shim to make rear wing more pointed down (negative angle of attack) the drag does go up, and the cadence goes up because board pitches up more aggressively. And yes, red and black fuse do have different lengths.
@WakeThief2 жыл бұрын
Shimming really should be done to tune the foil to get the right pumping cadence and front foot pressure (in steady flight). Each foil has a right answer for the rider.
@compkiler2 жыл бұрын
Can you do a comparison to the Art999 by any chance? 😉
@WakeThief2 жыл бұрын
We did an ART 999 video. Much faster, easier to turn, higher speed to take off
@kalmanb4 жыл бұрын
Loving the reviews! Looking forward to the new 1300 review, keen to see if it's better than the 1150 on the lake. Do you have an ETA for it?
@WakeThief4 жыл бұрын
Thanks, Kalman! I will target the next two weeks!
@kalmanb4 жыл бұрын
@@WakeThief awesome! There's a crew of dock starters here in Zurich that love the channel. Thanks!
@WakeThief4 жыл бұрын
Thanks for your support. I’ve loved learning and sharing this new sport with everyone and appreciate everyone’s input, feedback and suggestions. Happy new year, Kalman!
3 жыл бұрын
@Wake Thief Working on getting you known in Geneva. A soon to be celebrity in Switzerland.
@Thatspec14 жыл бұрын
"80cm from the leading edge of the front wing to the trailing edge of the rear wing ..." Is that a "short" or "standard" fuse in the black series? Sure appreciate your reviews! I'm thinking about moving up from ultra short.
@WakeThief4 жыл бұрын
In red series this is the standard fuse. I’m sorry. Didn’t appreciate you were riding AXIS. For what I do, I like the short fuselage. Good compromise. Good for pumping and good for carving. Standard fuse makes carving less fluid and dynamic.
@Thatspec14 жыл бұрын
@@WakeThief Thanks, I'm going to have to demo a short next season. Sometimes the ultra short is too pitch sensitive at higher speeds.
@WakeThief4 жыл бұрын
That’s a great point. If you’re going faster (winging) I might change my recommendation to standard.
@mphdemon3 жыл бұрын
How would you say the 1050 black is compared to the 1000 HA? Is it a big enough difference that it's worth getting the black series if the 1050 is the only HPS wing I'd be interested in?
@WakeThief3 жыл бұрын
Hey Chris. This is a tough one. I think they’re quite similar. It really depends what you’re doing. For what I do on the lake, I’d say they were similar, but I recall 1050 having better low speed lift and 1010 having better carving capability.