Nice vid. I’ve got a 204i myself, and am wondering how difficult it would be to swap in a 204l. Did you swap the entire engine? If so, were there any major complications, or do the two engines have pretty much the same footprint?
@BrokenVivas5 жыл бұрын
Ryan Walton the b204i and L are identical on the outside . if you want to use the turbo engine You have to plug the engine loom from the turbo in place of the n/a and use the turbo ecu ( which has had a vss delete ) as it is totally different . And the rest will bolt in like for like. If you wish to turbo the n/a engine . You have do all mentioned before and then knock out the core plug just below where the turbo sits and slot in the adapter to take a hose for the oil return. Install the turbo .Bolt all the turbo lines in place ( they’re literally just have bolts in them and are all there nothing has to be modified) remove the distributor and replace with the cap as on a turbo engine . And replace the crank sensor with a turbo one as they have a different plug and produce a different signal . And after all this ( usually takes about half a day if you’re experience ) Rodney the con rod usually leaves his home at 8-10psi of boost . Good luck with it bud and if you need any help or advice message me or comment on one of my videos .