AK Build- Part 8- Barrel Populating

  Рет қаралды 95,898

Baby Face P

Baby Face P

Күн бұрын

Пікірлер: 119
@BabyFaceP
@BabyFaceP 4 жыл бұрын
You can help the channel grow- www.patreon.com/babyfacep All funding goes back into the channel!
@josephdeluca1559
@josephdeluca1559 2 жыл бұрын
Gainesville Florida?
@BabyFaceP
@BabyFaceP 2 жыл бұрын
@@josephdeluca1559 Yup
@josephdeluca1559
@josephdeluca1559 2 жыл бұрын
Any chance you shopped at big daddy’s in 2019. I worked there. I live in lake city and just started building my first AK. Your videos are great.
@never2late454
@never2late454 3 жыл бұрын
Great how to videos. I built 2 East German AKM's about 2 year's back. One fixed stock and a side folder. A little advise to first time builder's, don't drill and pin the front sight until you shoot it . If the sight are off a little you can always tap it a little with a hammer at the range to get it shooting straight. Then take it home and pin it.
@Mountain_Yeti
@Mountain_Yeti 3 жыл бұрын
You just single handily saved my weekend 👍👍👍
@jmurockstar
@jmurockstar 3 жыл бұрын
Realizing how much easier an 80% AR is compared to a DIY AK.
@archangel20031
@archangel20031 2 жыл бұрын
Don't install/rivet the rear trunnion in permanently until the barrel is pressed in and completed so the ram can push the pennies squarely (I used a 1/4" thick pure copper disk), just place the pins in for fitting. AND FOR GOD SAKE DON'T FORGET WHENEVER YOU USE A PRESS, USE SAFETY GLASSES, AND EVEN A FULL FACE SHIELD IS A GOOD IDEA!
@ANTDZLVIZION
@ANTDZLVIZION 5 жыл бұрын
I felt super masculine when I dremeled my Magpul handguard for my WASR10, then I watched this. Salute at Babyface P
@ArmedRN
@ArmedRN 5 жыл бұрын
Leaving a comment here, one video from the last. Dude it's pretty freaking awesome to see someone love building firearms from scratch as much as you obviously do. Super educational man. I appreciate all ur efforts with the build and getting it on camera. Taught me a whole lot about a my AK’s. You mentioned ”GainsVille” and I realized that your not too far from me. Hope to one day link up with ya and do something super sick with some new/cool ”toys”. Thanks again my man!! 👍
@BabyFaceP
@BabyFaceP 5 жыл бұрын
I'd be more than happy to meet up and do some shooting! You let me know.
@alsatian9130
@alsatian9130 4 жыл бұрын
Greetings from upstate NY. Many builders here. Much respect and honor to you my friend. Keep up all your great work and stay safe.
@TheRoadhammer379
@TheRoadhammer379 4 жыл бұрын
Sssshhhhh, king Andy CuHomo will send his state police stormtroopers after you.
@alsatian9130
@alsatian9130 4 жыл бұрын
@@TheRoadhammer379 : of course s(He) will ;)
@c4dan
@c4dan 4 жыл бұрын
Upstate NY here, Andy boy is watching. Bwwwaaahh Hahah
@alsatian9130
@alsatian9130 4 жыл бұрын
@@c4dan : you bladesmith/knifemaker?? Upstate NY is were we play !!.....!! Keep them bevels sharp
@ibm_businessman6033
@ibm_businessman6033 3 жыл бұрын
Upstate New Yorker here, Currently researching the means to make my first AR. Cant wait!
@romeosgenericchannel3971
@romeosgenericchannel3971 4 жыл бұрын
Bout to replace my front sight block soon, These vids are a life saver thank you for sharing!
@GeeTee308
@GeeTee308 4 жыл бұрын
This series should have 100 million views worldwide. Thanks for sharing!
@robertmoran4841
@robertmoran4841 3 жыл бұрын
Hey Baby Face, I had to tell you how much I enjoyed this video. There are a lot of people on you tube who make videos, and talk guns and I'VE watched them all. I'm so glad to see other people loved this video too. Very well done, educational, and silly at the same time. I watched all the parts and wanted more. Thanks again, and good luck
@ArmamentAxes
@ArmamentAxes 5 жыл бұрын
It's been pretty cool watching this whole build!
@TheMotorcycleBoss
@TheMotorcycleBoss 3 жыл бұрын
I love how thorough you are with these videos. The best AK tutorial on youtube that I've found. 👌 it sucks however all the pressing, welding, jigs, etc needed to build one. I build AR's all the time and they are SIGNIFICANTLY easier to build with MUCH less tools. If anyone is thinking about doing their first rifle build, I would strongly urge you to do an AR-15 before stepping up to this. And AR's only need about $30 worth of specialty tools/jigs. But I love this little course. It is suuper helpful. Thank you for making this
@richardmanning7601
@richardmanning7601 4 жыл бұрын
Wow brother. Great job !! Those 4 people who thumbs downed you, got to be ignorant.
@noiwonttellyoumyname.4385
@noiwonttellyoumyname.4385 4 жыл бұрын
Don't use a drill bit for an interrupted hole- use a damn end mill!
@Tetoro249
@Tetoro249 Жыл бұрын
Thanks for sharing bro🤙🏽 definitely subscribing
@DEWAGE83
@DEWAGE83 3 жыл бұрын
Id imagine the hardest part of this is getting the mill and the press. I know people make kits without them but I cannot imagine they're getting the quality you are. I wish you would have shown how you checked alignment on the front sight.
@danielkoval2635
@danielkoval2635 4 жыл бұрын
This was The most informative and helpful video I found about how to build an AK thank you very much!
@BabyFaceP
@BabyFaceP 4 жыл бұрын
Get ready, I have a box of Polish Tantal parts that I'm about to start working on.
@archangel20031
@archangel20031 2 жыл бұрын
And he totally ignores breaking the drill bit on the second front sight pin hole!😂 And when pressing in the front sight pins DO NOT support the front sight on the "wings" but the middle of the barrel under the pins.
@1ferron
@1ferron 3 жыл бұрын
Life saver!!! Well “Project saver” lol thanks 🙏🏽
@iamkronix3422
@iamkronix3422 2 жыл бұрын
Man is actually a genius
@jeffreyMagnum460
@jeffreyMagnum460 5 жыл бұрын
You need some jig reamers, they work great for drilling partial holes. MSC, Enco, McMaster Carr should have them.
@BabyFaceP
@BabyFaceP 5 жыл бұрын
Have a link? I'll check them out.
@blunts4brekfast
@blunts4brekfast 11 ай бұрын
@8:00 What in the bubba guns is this?!?! haha kidding. good work
@ANTDZLVIZION
@ANTDZLVIZION 5 жыл бұрын
I was told if it's too tight, "just spit on it". Maybe that was for something else. Haha!!
@c4dan
@c4dan 4 жыл бұрын
Great video, these build videos are gold. Would love to see you do another build video on a Yugo parts kit.
@rtsguy4692
@rtsguy4692 5 жыл бұрын
Battleworn theme would be cool 👍🏼👍🏼
@Reisito305
@Reisito305 3 жыл бұрын
That $1700 price tag on a meridian doesn’t seem so unreasonable now. Great job with this series.
@gp6957
@gp6957 Ай бұрын
Good information , thanks a lot...
@pixamite1
@pixamite1 5 жыл бұрын
I’m enjoying these man 👍🏽👍🏽👍🏽
@frickandfracksicem
@frickandfracksicem 3 жыл бұрын
drilling should never smoke the oil, reduce rpm, this will reduce bit deflection, you can always High speed the video VS the bit.
@robavis4906
@robavis4906 5 жыл бұрын
Cant wait for the next vid. Nice
@frickandfracksicem
@frickandfracksicem 3 жыл бұрын
On the chuck, tighten all three holes, or use a collet. then the drill bit will not fall out; Machine shop tooling supplies has shorter drill bits and they are also half increment sizes: Example 1 and 1.5 and 2 and 2.5.... simplify
@panchopistola8298
@panchopistola8298 Жыл бұрын
Yep, lol even I know that and I am not a machinist
@jamesheath831
@jamesheath831 11 ай бұрын
God forbid that anything is measured accuracy. Unbelievable. 😮😂
@supeshazam1540
@supeshazam1540 4 жыл бұрын
Good job man
@011CJ
@011CJ 2 жыл бұрын
You need some brass jaws for that vice lol I love this build any time u cut off came I'm like I bet he is doing what I would b .I'd b taping stuff with a brass hammer to get it straight n true but it's not good to tall someone to do so so if go off camera to lol just my assumption . I did my first barrel with a block of oak and a god hammer
@C5D-D5R
@C5D-D5R 21 күн бұрын
How did you support the rifle when pressing in the FSB? Wasn't shown on screen. Thanks!
@inerlogic
@inerlogic Жыл бұрын
3 pennies? I used a nickel when i made my Maadi back in 2012..... inflation man..... I got a free polish, bent 80% when i bought the parts kit, but I used a commercial receiver... I have the rails but no spot welder, and i'd probably want the whole receiver hardened... maybe some day...
@CampDavid54
@CampDavid54 5 жыл бұрын
Thanks for the lead
@123say
@123say Жыл бұрын
Tell me about chromium barrel this ??? Which good metal used for barrel
@austinwiseman1441
@austinwiseman1441 2 жыл бұрын
Dude I want to build one so bad. Have a couple arsenals but I don't have nearly the mechanical skill you have. Pair that with 2k in tooling is it worth it?
@err5tt4tty72
@err5tt4tty72 2 жыл бұрын
متابعك من العراق عمل جميل اتمنا ان انجز واحدن مثلهو
@storminnormangunworks4911
@storminnormangunworks4911 Жыл бұрын
Are you sure it's a 23 size drill on the rear sight and 33 on the gas block and front sight?
@Keukeu45
@Keukeu45 2 күн бұрын
Would'nt be easier to do the whole barrel thing before riveting the front trunnion into the receiver?
@Subgunman
@Subgunman 3 жыл бұрын
You really need to find some small end mills to properly drill these barrel pin holes. I believe I learned this from Ginsboy2003 videos. Best investment I made. Metric mills available from the UK and Germany.
@SheepDogNumber6
@SheepDogNumber6 5 жыл бұрын
Nice.
@SWCCfreak
@SWCCfreak 3 жыл бұрын
Gville, niiiice
@SWCCfreak
@SWCCfreak 3 жыл бұрын
You be willing to meet up and teach me 😂 lol
@storminnormangunworks4911
@storminnormangunworks4911 Жыл бұрын
What brand drill bits do you recommend?
@Pedr0panini
@Pedr0panini 2 жыл бұрын
When you're pressing the gas block on, what part do you press on with the 12 ton press?
@The007craig
@The007craig 2 жыл бұрын
I would not call it an East German AK, at this point I would call it an East Coast AK because you have entirely built a new one. I assume you live on the East Coast.
@JockeyStrappers
@JockeyStrappers 9 ай бұрын
hey quick q if the front sight ends up being canted where even with a sight tool its still shooting to the left of bullseye, do i have to replace the whole barrel or can i get away with some hammering?
@BabyFaceP
@BabyFaceP 9 ай бұрын
Barrel in a vice and a long cheater bar to torque it can help some you need to be careful not to break it.
@newtypetommy
@newtypetommy 2 жыл бұрын
Where do you get the pins for populating? I have an old kit that is missing them and I never see them anywhere.
@BabyFaceP
@BabyFaceP 2 жыл бұрын
AK Builder may have them.
@vivov23e20
@vivov23e20 Жыл бұрын
Will you try building the type 81 Chinese
@BabyFaceP
@BabyFaceP Жыл бұрын
If I can get the parts
@CampDavid54
@CampDavid54 5 жыл бұрын
Hi Patrick I just got an ak-v and would like to replace the moe furniture with wood. Where should I look for this ?
@BabyFaceP
@BabyFaceP 5 жыл бұрын
Check Apex gun parts. They have a good selection.
@Parallax359
@Parallax359 2 жыл бұрын
how does the barrel not get bent during this process?
@thomasaltruda
@thomasaltruda 2 жыл бұрын
Have you ever installed the front sight post but not drill it until you test fire it, then clock the site post so it fires with the adjustment centered before you pin it?
@BabyFaceP
@BabyFaceP 2 жыл бұрын
No, too much gas pressure for me to feel comfortable doing that.
@thomasaltruda
@thomasaltruda 2 жыл бұрын
@@BabyFaceP gas pressure on the front site post? Not the gas block.. the front post?
@BabyFaceP
@BabyFaceP 2 жыл бұрын
@@thomasaltruda Oh I misread. Yeah it could probably work.
@craposnap
@craposnap Жыл бұрын
Its how i do all mine, your gas block can also be un pinned for test firing too. Once you have it sighted in you can pin all the components at once.
@WestCoastFront
@WestCoastFront 4 жыл бұрын
The rear sight, does it get pressed all the way to the trunnion?
@ar15modspot68
@ar15modspot68 Жыл бұрын
Where are you at in Gainesville FL???
@BabyFaceP
@BabyFaceP Жыл бұрын
North side of town. You need some work done?
@sunvol4503
@sunvol4503 2 жыл бұрын
So your the reason I got screwed up pennies XD
@GARUDA-MERDEKA
@GARUDA-MERDEKA 9 ай бұрын
coba pasang barrel 47 inch di AK 47 ❤
@GenericBrandDan
@GenericBrandDan 5 жыл бұрын
YEET
@PrototypeBMX
@PrototypeBMX 2 ай бұрын
i really wanna get the ddm4 rail it looks so much simpler than ak stuffs xD
@Dernimtmeinnamennich
@Dernimtmeinnamennich 5 жыл бұрын
What mill do you use?
@supeshazam1540
@supeshazam1540 4 жыл бұрын
That’s so cool how do you make one
@BuffordEvans
@BuffordEvans 4 ай бұрын
Duuuuude
@eztactical
@eztactical 3 жыл бұрын
I ran into an issue. I purchased an American-made 11.5" barrel from APEX gun parts and the OD for the gas block on the barrel measures at .632. The gas port hole is for a 90-degree gas block. Which AK/AKM gas block would be compatible? Or, would I have to get that portion on the barrel turned down on a lathe to .591?
@BabyFaceP
@BabyFaceP 3 жыл бұрын
Link me to the barrel.
@eztactical
@eztactical 3 жыл бұрын
I'm actually honored that it's you responding back. Very cool of you brother. www.apexgunparts.com/ak-barrel-11.5inch-us-made-knurled-nos.html
@BabyFaceP
@BabyFaceP 3 жыл бұрын
​@@eztactical Simple solution is to turn the barrel down a bit. Other option is to dig around the internet for a milled front sight gas block at .632.
@eztactical
@eztactical 3 жыл бұрын
@@BabyFaceP Kinda explains why the price was so low. Haha, that's what I figured. I found out that a Yugo gas block measures at .630 ID so it's possible in the midst of this ammo, parts, and everything else crisis. I might have it turned down on a lathe or purchase a different barrel. Thanks for the help!
@BabyFaceP
@BabyFaceP 3 жыл бұрын
@@eztactical email me at patrick@babyfacep.com. I can turn it for you if you want. We can talk price.
@bigrod0069
@bigrod0069 Жыл бұрын
👍👍
@randyflagg3935
@randyflagg3935 Ай бұрын
Have you ever heard of "soft jaws" for ALL your vice jaws. Copper works best in most cases. Soft but "sticky" unlike brass. Better grip than aluminum. ANY "Craftsman " should be ashamed of himself for leaving vice marks on his work. Flagg
@TheDrakanMaster124
@TheDrakanMaster124 3 жыл бұрын
Could you use a hammer to put the pins in instead of a press
@auskip07
@auskip07 3 жыл бұрын
typically hammers mushroom out the top (not ideal) But i bet you could do it
@AROUNDTHEFIRE
@AROUNDTHEFIRE 4 жыл бұрын
what part was the press pushing off there you couldnt see it was off camera
@BabyFaceP
@BabyFaceP 4 жыл бұрын
Give me a timestamp
@AROUNDTHEFIRE
@AROUNDTHEFIRE 4 жыл бұрын
@@BabyFaceP 13:00 your pressing the gas block stuff in. and im over here trying to figure out what you did uptop
@BabyFaceP
@BabyFaceP 4 жыл бұрын
@@AROUNDTHEFIRE Just using the press handle.
@supeshazam1540
@supeshazam1540 4 жыл бұрын
You worked hard on it but it’s not easy to make the Ak47
@huxythe3630
@huxythe3630 4 жыл бұрын
What did you mean check it for degrees? 14:02
@BabyFaceP
@BabyFaceP 4 жыл бұрын
Check the timing of the barrel so it's not twisted a couple of degrees to the left or right. Basically make sure everything is lined up correctly.
@shahramtaherinia9706
@shahramtaherinia9706 4 жыл бұрын
I am in Tampa. How can I get in touch with you?
@BabyFaceP
@BabyFaceP 4 жыл бұрын
patrick@babyfacep.com
@shahramtaherinia9706
@shahramtaherinia9706 4 жыл бұрын
@@BabyFaceP just sent you an email
@medic0079
@medic0079 4 жыл бұрын
You said Gainesville. Florida or Georgia. I’m a builder in the Gainesville Florida
@BabyFaceP
@BabyFaceP 4 жыл бұрын
Florida
@medic0079
@medic0079 4 жыл бұрын
Baby Face P sweet I sent you a message on Instagram
@BabyFaceP
@BabyFaceP 4 жыл бұрын
@@medic0079 I'll check for it.
@mysteriousman8769
@mysteriousman8769 3 ай бұрын
Expensive parts kit on poor build
@andrewlasalle4312
@andrewlasalle4312 4 жыл бұрын
Hay man the penny idea is good but fyi it is elegal to destroy us currency except for a suvenear
@robertbowers9856
@robertbowers9856 Жыл бұрын
Please watch your view blocking. It's frustrating to not see the critical moments
@gaugaming2910
@gaugaming2910 10 күн бұрын
nói nhìu vkl
@Ivan_Garov
@Ivan_Garov 5 ай бұрын
So, actually, now we know how they making AKs somwhere in Pakistan😂😂😂
AK Build- Part 9- Final
9:57
Baby Face P
Рет қаралды 72 М.
AK Build- Part 7- Installing Barrel
11:46
Baby Face P
Рет қаралды 137 М.
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 7 МЛН
Elza love to eat chiken🍗⚡ #dog #pets
00:17
ElzaDog
Рет қаралды 13 МЛН
Человек паук уже не тот
00:32
Miracle
Рет қаралды 2,6 МЛН
Making a 9mm-5.7mm chamber insert
35:40
The Rhinestone Hurricane
Рет қаралды 926 М.
How to make: Cardboard AKS-74U
10:00
Javi T Z
Рет қаралды 17 М.
Intro to DIY AK Building Tools (and tools you should buy!)
16:07
Provenance Machining
Рет қаралды 2 М.
Old Gun Restoration | ТОZ-34 |
21:35
Pavel Make
Рет қаралды 3 МЛН
Tortort-1960's Polish Type 3 part 2
32:37
Mel64D
Рет қаралды 11 М.
Polish Tantal- Populating Barrel
15:16
Baby Face P
Рет қаралды 8 М.
Разрушители оружия: СР-3 «Вихрь»
19:06
КАЛАШНИКОВ
Рет қаралды 93 М.
AK Build- Part 6- Heat Treat
13:27
Baby Face P
Рет қаралды 75 М.
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 7 МЛН