SUPERCHARGING a Crown Vic over the weekend | Ultimate Daily

Will picked up a new to him ppv crown vic for a daily after selling the cube. it didnt take long to decide to yank the blower off the mustang and put it on the vic. Sorry if this video is kinda all over the place, but i hope you enjoy!
O'Reilly belt part# K061130 that we used. (May or may not be right depending on pulley size used, front cover/tensioner, and if an idler is used.)
To get more behind the scene updates follow us on social media!
INSTAGRAM: @tricities_racing
FACEBOOK: Tricities Racing

[@leebaker2588]

I'm pushing 70. Thanks for the video. Made feeel 18 again. Peace

[@robsorgdrager8477]

I've had a few of these. The only two issues I've found with these 1. It should have had a 5.4 2. 5 speed is a must This chassis is just fun, for a 4400 lb car it drifts very well without any fancy steering mods. Ford made a mistake discontinuing this chassis and not updating it one last time.

[@maxtrigga9952]

Thank goodness it didn't have the 5.4

[@robsorgdrager8477]

@@maxtrigga9952 why do you say that ? They could have kept the 2v pi headed 5.4 alive in this and it would have been direct competition for the dodges.

[@canadianmarauder1923]

Subscribed! I have an 04 marquis and an 03 marauder so I love the panther content. Marquis is one of my daily drivers and marauder getting a complete restoration. I will keep watching

[@madman895]

I absolutely love this type of content. Fast and very well done. The world moves fast and so do I. Very well done.

[@FuzzyDingo265]

I'm so proud of you I've been watching all your past videos and just wanna say I'm proud of you and you know what I'm talking about

[@Sharptooth100]

Even super or turbo charging a Lincoln Town Car is a must. There is nothing wrong with that!

[@nerbon7164]

if I was Big money rolling. I'd be coyote swapping my vic. this reminds me of the ADTR kit.

[@crownvictorialifestyle4421]

Tick tick tick

[@danielfloyd1293]

A Day To Remember kit

[@michaeldiamond1606]

@@crownvictorialifestyle4421 noisy valves?

[@aspieotaku3580]

Id coyote with a twin turbo kit.

[@SNAFU_73]

seeing a lot of folks doing similar with the vics especially now that there are literally 1000s of them on the street in ex-police car form, my 02 p-71 project car being one of them.

[@Mustangrocket98]

nice setup I like it the supercharger but on my grand marquis I want to swap to 32 valve and then supercharged

[@rickywittner8885]

Swap a 5.4

[@shartingfish5761]

It's a waste, unless you find a terminator the 2v is a better motor, just heads, cams, exhaust and intake manifold will get you over 300hp.. if you get a saleen or roush m90 and bolt it on with a retune 400-500hp all day.. you will need to do some transmission work though otherwise you'll nuke it..

[@02lsev8]

Trust me its worth it in the end I have done a full blown marauder conversion from drivetrain to interior and exterior in my 99 cvpi but it's costly bro

[@canadianmarauder1923]

I have an 04 marquis and an 03 marauder. Both 2v and 4v are great engines. I say use ur 2v and don’t swap in a 4v You can make big power with both. If ur a handy guy with a decent well equipped garage and can do the swap yourself then have at it. Check out Andrew Lavender’s channel if you don’t think the 2valves can make much power

[@chrishernandez2490]

@@shartingfish5761 you're out of your mind saying the 2v is a better motor than the 4v. You're saying heads, cam and exhaust will get you over 300 hp while the 4v already has over 300 stock.

[@louiewatson9389]

Good, definitely need to do a preventative timing chain guide and tensioner replacement. That's a weak point in these engines.

[@vicology9496]

Nice setup. Always wanted a red sap. I did a fresh top end on my vic first. Thinking of doing tremec 3650 trans, forged bottom end and then forced induction

[@stuartracing1]

Hopefully the trans. holds up ok,...I have a 01 GMQ LSE with all the bolt ons...80mm MAF,75mm TB,SCT tune by Keepum coming...MOE`S..Awesome video...

[@carstuff4558]

Im sorry but after all that work why would you not include some street pulls?

[@BoostandBadHabits]

Rain. We actually took it to the track after we finished it and planned a night of racing only to get rained out and didnt really want to put off uploading the video any longer than i had. I can make another video of the car on the street though. Haven't really done anything with the car since.

[@carstuff4558]

@@BoostandBadHabits yes please I wanna do something similar or a turbo on my grand marquis that i cant get rid of since it was willed to me Just wanna see how it is first Or if i should cut the bull shit and go straight for ls swap

[@P71ScrewHead]

@@carstuff4558 ls swap is gay, shoulda gone Caprice cop car instead in that case..

[@rickywittner8885]

@@carstuff4558Triton 5.4

[@4.6kj]

He’s the 0.5% of the population that “ goes to the track” 🤓🤓🤓🤓🤓🤓🤓🤓🤓🤓

[@1996impalass]

Nice man. Keep it up

[@aidankirby8412]

Badass video Brother! Thanks for Sharing..

[@JoshuaWilliamsMA83]

Very nice! Can't wait to supercharge my 09 MGM!

[@RichBshine1972]

Great video. I want to do the same to my 04 crown vic. Could you let me know what something like this costs parts and labor Thanks

[@desertratedc9596]

Tricities racing... like tri-cities washington? If so then hello neighbor! Hermiston oregon here. I drive a 93 Crown Victoria LX.

[@pstreetgarage7304]

Would love to do something like this on my Marauder

[@Planethopper117]

I noticed towards the end of the video there was a lot of wires by the cooling fans. Let me guess.... the cooling control module went out and you have to straight wire them lol. That has happened to ALL of my newer vics :/

[@BoostandBadHabits]

Spot on lol.

[@Jaydaprez]

Very nice 👍 ..I gotta 03 police inceptor would love to do this too

[@bobshackleyltd2302]

Hey this is great, guys. I am buying an 04 in a week. You guys ever consider putting kits together and selling them? I'd buy one.

[@BoostandBadHabits]

Thanks! Its crossed our minds a few times. We've been asked alot surprisingly..

[@bobshackleyltd2302]

@@BoostandBadHabits I bet. Well you guys could put a package together with instructions. Your discoveries could pay off for all of us.

[@Velanestar]

This. So much this. I love how the 4.6 2v sounds and how it feels like it has so much power in my 2000 lx but its soooo heavy. It needs a supercharger lol

[@louiewatson9389]

Would've been great if you'd have gave the part number on that belt. That would've helped people save a lot of trouble.

[@BoostandBadHabits]

That would depend on what pulley you're running and if you use an idler or not.

[@BoostandBadHabits]

But i can get the part# of what belt we ended up using and add it into the description for those that want to know. It may or may not be right depending on the other factors.

[@BoostandBadHabits]

O'Reilly belt part# K061130

[@WillBABH]

Problem is it depends what front cover you are using this car has a 1 bolt front tensioner off of a 98 mustang gt which uses a shorter belt that the crown vic front cover

[@ParissaKhoury]

Where is your shop located? And would you also recommend doing the cam on the engine?

[@TheJMan1K]

So nothing needs to be rebuilt with the Vic? Just a super and tune?

[@WillBABH]

Only things I done was a maf, injectors, and blower. And ofcourse a tune.

[@cheeko_914]

As long as you dont put a bunch of boost in it you dont need built internals. Same goes with any forced induction

[@MrRetahreggin]

Gale Banks would have a shit fit if he seen that radiator heated air flowing straight into the supercharger.

[@WillBABH]

iats never got wild so id say its just fine

[@JA-dc9xv]

I'm sorry is this a 2005 and up CVPI? Or a P71 05 and up? I'd like to super my 08 stock sedan Lx and need help..

[@vicology9496]

CVPI and P71 are the same vehicle. 05 - 11 Crown Victoria’s should all be just like the one in the vid

[@SKATETOSLAYER]

I have a stock 250hp 2011 Crown Vic P7B, how much hp does doing this gain?

[@BoostandBadHabits]

Realistically enough to scatter the bottom end pretty easily depending on what pulley size you run, probably somewhere around 400-450 hp if you wanna be safe and keep the boost around 12 psi. So 150-200whp gain pretty easy. Toss some rods and pistons in it and youre good to push the blower 700+ with this particular blower.

[@SKATETOSLAYER]

TRICITIES RACING 😲

[@BoostandBadHabits]

@@SKATETOSLAYER Now how well your transmission likes that power is another story. Ours went out, but we beat on it pretty hard. So we just manual swapped it.

[@nolanniles9522]

not a ford guy but good job bro from Canada

[@donovanbauer8579]

So can i throw crown victoria police intercepter engine in a mustang with a V6. Also its an engine swapp idea

[@MrDavidelliottjr]

Yes you can but you need thr computer and wirr harness and trans.

[@aspieotaku3580]

Cheap way to convert it to a GT lol.

[@sterfye6752]

Yoooooo I got a p71 we gotta do this😂😂 & run them of course🤯let's work

[@BoostandBadHabits]

This setup is a few years old. It's got a twin turbo Raptor 6.2 swap now

[@jgower12345]

I am trying to supercharge a modular Ford 4.6L 2V V8 engine in a Mobility Ventures MV-1 handicap van for my 21 year old son. Talked to Summit Racing, Magnuson and VMP...without promising results. Any help?

[@felixlafuente9714]

My friend, the coolant cap must be bad... It's doing vaccum on your circuit... Look those hoses...

[@berniceperry8898]

Hey guys have an 01 vic, how much was that supercharger....ty in advance...

[@Tommysmess]

Hey where so you get that in line radiator cap? I need one of those for my crown vic

[@iamthegambler9512]

Where’d you get this supercharger I’m looking to get one for my lincoln town car

[@BoostandBadHabits]

We used a 99-04 mustang gt. Kit and made our own piping. Picked it up used off facebook marketplace.

[@joshuabowman2169]

@@BoostandBadHabits did you have to make custom brackets for it as well? Looking to supercharge mine soon and wanted to use a 2v mustang kit as well

[@CalebMcCoy-v2l]

Are you guys are located North Carolina correct

[@encinobalboa]

If your cousin needs something run down to the county line, you are all set.

[@tysonsmith9216]

I’m putting a 98 mm on a crown Vic today

[@asmith7094]

9:27 This is what you came for

[@ThePursuitofHappiness1988]

Can you create a step-by-step tutorial for those of us who want to build this?

[@BoostandBadHabits]

We don't have the kit no longer. The car has been swapped to a Raptor 6.2 engine and now twin turbo.

[@ThePursuitofHappiness1988]

@@BoostandBadHabits can I email you guys? I have more questions.

[@socastee_5.097]

Yo so if i did this could i do it without doing the timing chain cover gaskets ? I just bolt it on ?

[@kylesellz1909]

Did you upgrade the fuel system?

[@Commander76]

As a shop how much would you charge to do this to another Crown Victoria? Same fabrication, same used but working parts.

[@WillBABH]

If you have every part and I just have to fabricate the intercooler piping it wouldn't be that bad I could even throw a tune on it if its an 05+ car

[@Wooley689]

Yep, you can do mine.

[@radicalizedonline6825]

@@WillBABH Hey will, I have a 2011 CVPI , could you give me a range of about how much I'd expect to get the same job done you just mentioned, not trolling or anything I legitimately am interested...my baby needs some more pep in her step man and you guy's have got me doing a lot of thinking all of a sudden.

[@Commander76]

@@WillBABH Perfect.

[@Evil_Morty2000]

Kevin James has a youtube channel?

[@redneckgames9357]

What supercharger is rhat

[@wavyclan9653]

Hey ham have any idea how much hp and how much was the turbo

[@GrandMarquisLS09]

8:41 😂

[@princedonnylittledonny328]

Nice

[@mr.louweeziana122]

The bottom end is still stock??

[@georgewilliams3740]

Great video guys!! I just happened to run across your channel. I don’t have a crown Vic yet but I’m looking for one. I was wondering if you guys can or would be interested in installing a supercharger on my 02 f150? It’s a 4.6 2v and just a great motor in my opinion. I can pay in cash if you guys can do the job. Thanks and you just got a new subscriber!!

[@BoostandBadHabits]

Thanks, Appreciate the kind words! Im sure we could no problem. You can email [e-mail] and talk with him about it. Hes the owner of the vic/shop.

[@ericktalley5855]

Is the rear end stock?

[@vastolordez8457]

Does the ac still work?

[@jameswelch8358]

What you do for exhaust? Aren't the stock manifolds only 2" out? Headers?

[@BoostandBadHabits]

Yeah we used Stock

[@Daize504]

isnt that a turbo??

[@BoostandBadHabits]

No, its a Vortech v3 supercharger kit from a 99-04 mustang gt made to fit the crown vic.

[@Daize504]

@@BoostandBadHabits cool! absolutely badass brotha! yall my new idols with this shit!

[@killianlastname1108]

I have an 03 vic and found a guy selling the eaton blower off a svt cobra of the same year. Would it work?

[@BoostandBadHabits]

Unfortunately not.

[@killianlastname1108]

@@BoostandBadHabits what would you suggest I get? I don't need anything too expensive however I know that superchargers typically ain't cheap either.

[@BoostandBadHabits]

Yeah not many cheap options really. They make a torktech kit that will allow you to use a stock cobra blower, but its still fairly expensive. They are having a sale on them right now but you might possibly be able to find a used kit somewhere to help with cost.

[@killianlastname1108]

@@BoostandBadHabits thanks for the info.

[@greenrogg6226]

Does anyone know what the p-71 or whatever is and what it changes if anything

[@JR-eb2qk]

The P 71 is the Police version of a crown vic. They were modified to handle aggressive transmission shifts .

[@alphakilo9099]

How much money did it cost to install that turbo

[@cheeko_914]

There is no turbo

[@alphakilo9099]

@@cheeko_914 super charging same thing

[@byrdneshia]

Where did you get the supercharger from?

[@BoostandBadHabits]

Used on facebook marketplace for a 99-04 mustang gt. That we modified to work.

[@ooooooo6038]

What bracket was used to bolt up the supercharger?

[@BoostandBadHabits]

We used a 99-04 mustang gt vortech v3 kit and modified the intercooler pipe to fit.

[@cesarestrada5020]

What were the HP and Torque Numbers

[@BoostandBadHabits]

Never dyno'd it. Im sure close to 500

[@jameshoughtaling2298]

That’s not a supercharger, that’s a blower/turbo

[@BoostandBadHabits]

It's 100% a supercharger...

[@jonathon0010]

Bro superchargers use a belt that sucks the air in. That’s a turbo.

[@thkfilms5683]

What supercharger you use

[@BoostandBadHabits]

Vortech v3 kit for a 99-04 mustang

[@JeffBolen]

What tuner can you tune a cvpi with?

[@BoostandBadHabits]

Depends on the year but most use sct. We use hpt

[@HazeReactions]

Add 410 ‘s gears they are stronger even 430 will make the Vic a rocket Keep doing Vic videos bro. I did mustang swap back in 2000. Check it out 99gtvic I’m locked out this page smh

[@BoostandBadHabits]

The vic actually has 4.10s in it now. We broke the 4:30s not to long ago.

[@masonhendrix6266]

Anyone know if a 2005 Mercury grand marqu is a 2v???

[@BoostandBadHabits]

Yeah.

[@masonhendrix6266]

@@BoostandBadHabits it a 2v okay cool thanks for replying back have a merry Christmas and happy New year bro

[@BoostandBadHabits]

@@masonhendrix6266 No problem. Merry Christmas and Happy New Year to you as well!

[@alexisdown408]

So that would mean that my 06 crown vic is a 2v also?

[@BoostandBadHabits]

@@alexisdown408 yup.

[@makingithappenwithskip7872]

If you dont mind me asking what turbo setup is this....plz let me know thank u and were can order from

[@BoostandBadHabits]

This is a Vortech v3 supercharger kit for a 99-04 mustang gt modified to fit the vic

[@josephcole8577]

So you guys have any contact info other than email? If not maybe you guys can tell me what a set up like that would cost and if you would modify my 2006 vic or if you could direct me to who can... thank you

[@WillBABH]

You can message me on Facebook. William Franklin Stipes my profile picture is a bird with a headband

[@WillBABH]

Or instagram. @redfire_will

[@chriscoleman1427]

@@WillBABH i want sum info please

[@jonathon0010]

That’s a turbo 😭

[@BoostandBadHabits]

No it's not lol 😂

[@tommychris1627]

I want to do the same shit same year car

[@chrissteele5250]

How much does a supercharger run for

[@BoostandBadHabits]

One like this runs about 2k-3k used depending on whats included in the kit.

[@interceptor90ify]

Justed sub

[@gaskina13]

change title to Procharged

[@BoostandBadHabits]

Its not procharged... Its a vortech v3 centrifugal Supercharger.

[@cheeko_914]

Not a procharger dumbass

[@dennismack6389]

Nice

[@lbb9262]

How many psi can that put out and what did it cost

[@cheeko_914]

Depends on what pulley you put ob