Dodge Avenger Front Brake Pads and Rotors Replacement 2008-2014

Dodge Avenger Front Brake Pads And Rotors Replacement. 2008 2009 2010 2011 2012 2013 2014. How to Change Brakes and Rotors on your dodge avenger step by step. Tutorial on changing your front brakes.
Caliper Spreader Tool - amzn.to/34kGpn2
Disc Brake Caliper Lube - amzn.to/32cmAvz
Brake Cleaner - amzn.to/2QfOtx3
Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases.
I assume no liability for anything you choose to do to your own car. All Repairs you perform to your car are performed at your own risk.

[@familyglow]

This is the most clear, concise, no BS tutorial ever. Great camera location too! Even a dummy like me can figure it out now. Great job, thanks!!

[@backyardchevy328]

Thank you🙂

[@godis...7837]

Just did my front pads today, with the help of your video. It took an hour total for both sides. It runs silent and brakes strong. Thank you so much for your help. The shop want over $300. I spent roughly $50 on pads. They came with all the hardware and a little packet of grease. I am now subscribed. Thanks again!

[@backyardchevy328]

That's awesome🙂 im so glad u were able to save that much money and get it done🙂...thank you so much for supporting my channel.

[@godis...7837]

Thanks man. I was amazed at how easy it was. Your step by step instructions are easy to remember and worked great. I greatly appreciate it.

[@curtdiego3448]

What size was the rotors

[@treytrey4411]

14mm and 18mm and c-clamp and jack is all you need. Thank you

[@backyardchevy328]

Yes thatll work🙂, but a jackstand or something for safety as backup if jack fails to be safe🙂

[@dudleydorite7678]

Wrong I needed 2 band-aids also

[@gregvela4817]

I know it's a long shot but does anyone know the brake bracket bolt sizes? The top one specifically? Need to buy a new one mines fell off

[@gregvela4817]

Or if someone can send me a link I'd appreciate the help

[@brianongod899]

Only spent $26 on front brake pads and did this job with a cross and a 14MM wrench. Did the first brake with out a clamp and improvising. Thanks for the tutorial. Took about 2 hours because I was looking for a lot of improvisment for tools.

[@prettyboyerin8879]

What’s all the tools you need

[@smidkiff70]

Had my brakes replaced less than 6 months ago and noticed they stated making a grinding and squeaking sound at stops, especially slower stops. At times, my right brake would even grab so I knew something was wrong. I usually have a family friend do my work, he's a professional mechanic and does work on the side, but I came across your video and thought, I can do this myself! Man am I glad I did! Your video plus quality parts and no more issues! Thank you for doing what you do to help people who still want to turn a wrench!

[@backyardchevy328]

Thats awesome! Great job🙂👍

[@jonathangordon6930]

My caliper bolts were installed incorrectly and I tried calling everyone I could think of, and no experts were able to help. I then watched several KZbin videos to no avail, then I watched this video and got all the answers I needed. Thank you so much!

[@backyardchevy328]

So glad it was helpful🙂👍

[@cherylrenee8238]

My husband doesn't like to work on cars but with your video he was able to do our front brakes in just a little over an hour. We saved a lot of money and now he knows he can do it again in the future. Thank you so much!!

[@backyardchevy328]

That's awesome🙂 great job..hopefully in the future im able to help you both save more money...thank you guys for the support🙂

[@jreckless5824]

2 years has past and this is still the best and helpfull video i ever seen.

[@backyardchevy328]

Thank you🙂 greatly appreciated

[@youknownothingofmeormywork6001]

One of the best automotive videos I've ever seen. Good work.

[@backyardchevy328]

Thank you so much, this comment means so much to me:)

[@dolfowolfo1]

Awesome video sir. You give step by step instructions with torque steps included, without all of the fluff. Using this tomorrow on my mom's vehicle!

[@backyardchevy328]

Thank you🙂 thats awesome hope everything goes smoothly🙂

[@korinholio]

Good stuff. Havent changed brakes in a while, needed a refresher, this helped immensely.

[@backyardchevy328]

Thank you🙂 so glad to be able to help

[@jdotTV89]

Thank you for being so clear and straight to the point. Showing great camera angles and going at real time speed to keep up 🐐 activity

[@r.d.4437]

This video was outstanding just finished my 2013 Dodge Avenger Front brakes with rotor and pad kit went really smooth cannot thank you enough saved a lot of money🙂

[@eliasperez2951]

Just finish doing both front side of my avenger, thanks for your video❤

[@firstnamemcsurname5696]

Thank you so much! I just did my front pads with the help of your video and you certainly saved me a lot of money :) thank you thank you thank you so so much!

[@AlteredLifes]

You helped me more than you know my friend. Thanks a lot for the video

[@semperoccultus1969]

Thanks for this video. I have done a lot of brakes and looks like Dodge makes it easier than others. Doing these this weekend for my GF. Thanks again

[@Dr.Gordon777]

Thank you did mine following your steps and finished it thanks I saved a fortune and paused and played as was able to get it done within a few hours thanks again for the video

[@sharingangod354]

really good video, had all the little details that other videos didn't have, such as using the lubricant and clips, etc. thank you

[@backyardchevy328]

Thank you🙂

[@donniemallory5123]

Thanks. Saved me. I didn't pay attention to the difference in the slide pin bolts.

[@backyardchevy328]

Glad to be able to help🙂👍

[@jonhlind]

Awesome video man. Very clear and concise

[@backyardchevy328]

Thank you🙂

[@myjams3]

Excellent tutorial.... Thank you.

[@Traumatizering]

This was really helpfull. Did the front brake discs and pads on my 2008 Dodge Avenger today. Greetings from the Netherlands.

[@backyardchevy328]

Thank you🙂 Thats great! Great job👍 greetings from California

[@nitroexsplosion]

Yo sick! I'm currently planning the same for my 08 Avenger and I can tell this guide will be immensely helpful. Regards from the USA.

[@backyardchevy328]

@@nitroexsplosion thats great🙂👍 thank you

[@robertchristner4510]

thank you . you saved me a lot of money

[@backyardchevy328]

Thats awesome🙂

[@trtr9951]

Thanks for a great video!

[@backyardchevy328]

Thank you🙂

[@HappyHappy-iq7qb]

Very helpful, thank you!

[@backyardchevy328]

Thank you🙂

[@215taypromotions5]

Great video!

[@backyardchevy328]

Thank you🙂

[@prettyboyerin8879]

I thought this was so hard lol but this look easy just follow the steps, I finna save this video and buy me some pads and rotors and the tools

[@mistersniffer6838]

Thank you sir!

[@user-kk8tj2yz5n]

Thanks pal 😉

[@hexirican3779]

My Wife said I may need to bleed the breaks but didnt see it so I’m assuming pushing the piston back should be sufficient or at my missing something ?

[@underhill918gaming5]

Can/will you do a video on bleeding the brake line? PS, you've definitely earned a new sub for this video.

[@backyardchevy328]

Definitely will🙂 thank you so much

[@underhill918gaming5]

@@backyardchevy328 I appreciate what you do. You provide incredibly valuable information for inexperienced DIYers.

[@backyardchevy328]

@@underhill918gaming5 Thank you..i enjoy helping people🙂 definitely a great feeling to be able to help someone fix their own car and save them money in the process

[@claybird8494]

Nice jack

[@backyardchevy328]

Thank you, unfortunately that jack has gotten on my nerves lol..everytime i use it its a loud squeak squeak everytime I lift with it...yet my low profile of same brand, ive had it for longer works so much better, yet doesn't have that problem.

[@claybird8494]

@@backyardchevy328 Im from Pittsburgh thats why I like it lol

[@backyardchevy328]

@@claybird8494 lol..hello from California👍

[@acridsociety916]

Do the brake pads touch the rotor when installing new ones

[@Layarion]

is the torque info listed occasionally in the video applicable to a 2010?

[@backyardchevy328]

Yes, the one im working on is a 2010 as well, but it should be the same torque spec for the years listed above.

[@matthewowen9646]

Do I remove brake fluid cap before I start pushing down brake caliper

[@backyardchevy328]

They have a small vent hole but it does make em easier to push in, so yes..just keep an eye on the level so it doesnt overflow

[@lokoflipz5344]

Love your voice. No sarcasim. No homo.

[@backyardchevy328]

Thank you🙂 makes me feel better about my videos, since at first i was so uncomfortable talking with a deep voice on camera

[@lokoflipz5344]

@@backyardchevy328 haha. No problem man. Thank you for the video. Very helpful

[@backyardchevy328]

@@lokoflipz5344 thank you for watching and for the support🙂

[@insanehands4066]

what camera are you using? very nice quality👍

[@LottyhanzFamilyties]

I need replacement bolts for the ones your unscrewing at 2:50 on a 2012 Avenger. I can’t seem to find any online does anybody know of a source where I can get these??

[@backyardchevy328]

Best place would be the dealer, they normally stock the original replacement bolts or can order em for you

[@breezebush5665]

Can you wipe the anti corrode off if you don't have the spray

[@susanlloyd3515]

Is the bolt that has the sleeve supposed to go on top or bottom?

[@backyardchevy328]

On the bottom

[@user-jm5fv8ui7n]

❤

[@thelcsmith22]

What size do i need for my 2013 avenger?

[@backyardchevy328]

It uses the same ones as long as its the 4 cylinder model.

[@joshb3743]

One of my brake calipher bracket bolts snapped, any advise on where to find another I’m lost.

[@backyardchevy328]

Have u tried the dealer? Either that or a salvage yard would be ur best bet for an original bolt

[@joshb3743]

Backyard Chevy I’ll take a look at some salvage yards tomorrow, thanks man it’s crazy no one carries the parts for it even online.

[@backyardchevy328]

Ebay has some for the front caliper bracket bolts but not for the rear unfortunately

[@backyardchevy328]

@@joshb3743 yea i know..but guess the rear bolt isnt as common...hope u find it..good luck🙂

[@joshb3743]

Backyard Chevy could you post the link for the front bracket bolt? That’s exactly what I’m looking for 😭

[@estevang6101]

How do I find the brake code for a 2013 Dodge Avenger SXT?

[@backyardchevy328]

Ur abs light is one? Or ur brake light? If only ur brake light is on then it means ur brake fluid is low, parking brake is on..or loss of brake pressure in system...if ur abs light is on youll have to have it scanned and retrieve abs codes

[@estevang6101]

@@backyardchevy328 I need to get the right size rotor for a 2013 Dodge Avenger SXT. They said it'd be a 294 or 340 and that they'd need a brake code but I've been googling and searching and asking people but can't come up with anything

[@backyardchevy328]

@@estevang6101 yea they have two different sized rotors in millimeters...if u have a measuring tape u can measure it top to bottom in inches and if u get 12.5 itll be the 294mm and 13.4 will be the 340mm...or u can use the vin number and call the parts dept and theyll be able to tell u what size rotor u use

[@markbronson6724]

You missed one important step, you forgot to remove, clean and apply new grease to the caliper slide bolts!

[@crownmekingls4]

Backyard Chevy working on a mopar how dare u my friend 😂🤣 j/k

[@backyardchevy328]

Mopar or no car haha jk..i fix everything🙂👍

[@crownmekingls4]

@@backyardchevy328 good video doe u just save my sister a few bucks

[@backyardchevy328]

@@crownmekingls4 thank you🙂 thats awesome!

[@JTPanda]

What size MM was your brake pads?

[@backyardchevy328]

The Rotor was a 295mm rotor diameter

[@manuelcamino1609]

Backyard Chevy hey I know this was a while ago sorry but was this size for rear, front or both?

[@curtdiego3448]

Yeah because they sell a 295mm and 294mm. I was leaning toward a 295mm.

[@dudleydorite7678]

Wish I would have watched this yesterday I never put the lug nuts back on.

[@backyardchevy328]

Oh no..hopefully nothing happened

[@dudleydorite7678]

@@backyardchevy328 😂 jk excellent video

[@backyardchevy328]

@@dudleydorite7678 lol thank you

[@ItzSeagull]

The bolts for me is not easy to loosen, I’ve tried everything for 2 hrs and nothing is happeninf

[@backyardchevy328]

Any chance the back caliper pin is turning with the bolt? If so youll want to grab a wrench and hold the caliper pin nut...if its hard to loosen have u tried a longer ratchet or wrench for more leverage?

[@ItzSeagull]

@@backyardchevy328 I have a longer wrench but now the head of the bolt has now stripped and I can’t get the rathet back on

[@backyardchevy328]

@@ItzSeagull yea then in that case you might have to try a 6 point socket or one of those special sockets for stripped heads

[@215taypromotions5]

Great video!

[@backyardchevy328]

Thank you🙂