Literally nobody makes a video as helpful as this, you are absolutely a life saver now I can confidently install my exhaust thank you!
@backyardchevy3284 жыл бұрын
Thank you so much..really appreciate it🙂
@irukandji___5 ай бұрын
Agreed! Thank you so very much
@ChinmayH2 жыл бұрын
you seriously made this look so easy. Video is so detailed that I think with no prior experience I can do this.
@backyardchevy3282 жыл бұрын
Thank you🙂
@aaronparraz3793 жыл бұрын
We need more videos like this for intakes and almost any mod for your car 💯
@backyardchevy3283 жыл бұрын
I do have one for a cold air intake as well🙂
@smithsfan4254 жыл бұрын
I’d love a vid on how to bleed brakes, replace both the manual transmission fluid and the differential fluid too! Love your vids, really helpful. I subscribed.
@backyardchevy3284 жыл бұрын
Thank you i really appreciate it🙂..yea ill definitely work on getting to those
@anthonyspinozzi13122 жыл бұрын
Legendary video. Just got an FRS and i want to install an exhaust but I have never done anything on a car before. I think this is a good first mod to do and learn about how your car works and this video was magnificent. Well done!
@backyardchevy3282 жыл бұрын
Thank you🙂 let me know how it goes..good luck🙂👍
@damfnmaster3 жыл бұрын
You go over every detail and provide excellent tips. Amazing video. You should make more!
@backyardchevy3283 жыл бұрын
Thank you🙂 yes i have made many more
@damfnmaster3 жыл бұрын
@@backyardchevy328 I’m watching them now! Thanks man!!! I love your cat!
@backyardchevy3283 жыл бұрын
@@damfnmaster thank you🙂
@gunprojects53982 жыл бұрын
Good job. Just an added tip to anyone else who watches this, when using a band clamp like that, its recommended to put the bolt of the clamp 90 degrees to the notches in the larger diameter piping to avoid leaks. Torque is usually 45 ft lbs on those type of clamps if anyone actually cares lol
@tommysiharath6988 Жыл бұрын
This was very therapeutic to watch
@11metalfan2 жыл бұрын
Fantastic video, brother. It can't be easy to move the camera around so much and take shots of every step but it makes a huge impact Subbed
@11metalfan2 жыл бұрын
Also a big help that you're doing it on the ground like most home-gamers haha
@backyardchevy3282 жыл бұрын
Thank you🙂 really appreciate it
@mkasperk3 жыл бұрын
Awesome tutorial! This looks way easier than you would think, and probably saves a ton of $ paying labor to a shop. My only problem is finding a bolt on catback for my Q5 2.0t. Flowmaster makes a really nice kit for about $800 for the 3.0t, but not for the 2.0t. I messaged them to find out if it would be compatible with my vehicle. Hopefully I may get some good news. Your new exhaust sounds awesome, I'm sure you love it! Thanks for posting!
@backyardchevy3283 жыл бұрын
Thank you🙂 yea doing this can look more intimidating than it is..hopefully it is compatible...good luck(crossing my fingers)
@Neichus Жыл бұрын
Great work! I have a 2014 FRS and I’m going to change my exhaust soon
@onlybens_2 жыл бұрын
just ordered this one, cant wait
@haden3705 Жыл бұрын
whats the link?
@anthonynguyen-pham86164 жыл бұрын
Great informative video! Thanks for making this!
@backyardchevy3284 жыл бұрын
Thank you🙂
@SuperMaxCarp Жыл бұрын
You did great brother...btw you may have answered this but which exhaust is this? Im looking for one for my frs...this looks and sounds great...very nice ground clearance too
@nareshraob6 ай бұрын
Radio is very detailed and an excellent help. I purchased a used q300 which should not come with any hardware. Can you please let me know the size of the nuts 'n bolts and the gasket? Thanks.
@Kulxc Жыл бұрын
This is very instructional thankyou
@_danieljr5 жыл бұрын
Great video thanks man 🙏🏻
@backyardchevy3285 жыл бұрын
Thank you🙂
@Jefeka77774 жыл бұрын
really helpful
@backyardchevy3284 жыл бұрын
Thank you🙂
@tomzandmicky82393 жыл бұрын
A master class. Thanks.
@backyardchevy3283 жыл бұрын
Thank you🙂
@dubya853 жыл бұрын
excellent vid man - thanks
@backyardchevy3283 жыл бұрын
Thank you🙂
@bloodstinged4 жыл бұрын
Awesome!
@backyardchevy3284 жыл бұрын
Thank you🙂
@DafergoEngineering4 жыл бұрын
Thanks for the video!
@backyardchevy3284 жыл бұрын
Anytime🙂..thank you for watching and the support
@saulespino25104 жыл бұрын
I have an Invidia Q300 also and did you get this exhaust because the big flat muffler helps the aerodynamics underneath? Savagegeeese says it help against the parachute effect.
@backyardchevy3284 жыл бұрын
Lol it does? I didnt know that
@radiopuntina99402 жыл бұрын
Nice video. What tires are those?
@backyardchevy3282 жыл бұрын
Thank you🙂 i believe the federal ss595's
@ratecoudo5 жыл бұрын
Nice.
@backyardchevy3285 жыл бұрын
Thank you🙂
@vipraz1194 жыл бұрын
Very nice video. Good job
@backyardchevy3284 жыл бұрын
Thank you🙂 i really appreciate it
@scot76192 жыл бұрын
Great video!
@backyardchevy3282 жыл бұрын
Thank you🙂
@vendiagram22854 жыл бұрын
amazing video
@backyardchevy3284 жыл бұрын
Thank you🙂
@sganet_3 жыл бұрын
Thanks!
@backyardchevy3283 жыл бұрын
Thank you for the support🙂
@dcarsni87934 жыл бұрын
I assume the Borla exhaust will be this easy. Thanks for the video
@backyardchevy3284 жыл бұрын
Yea it should be that easy🙂
@Porsche911-f2h3 жыл бұрын
Hey man ! Nice video !!👍🏻👍🏻👍🏻👍🏻
@backyardchevy3283 жыл бұрын
Thank you🙂
@alanmatthew1693 жыл бұрын
God bless you 🙏🏻
@backyardchevy3283 жыл бұрын
Thank you🙂
@adamkb26784 жыл бұрын
How loud is it compared to stock, will it piss off the neighbors?
@backyardchevy3284 жыл бұрын
Its definately louder than stock...if u rev it often itll piss em off lol...at idle theyll know u have ur car on
@nizki1213 жыл бұрын
You da best!
@backyardchevy3283 жыл бұрын
Thank you🙂
@dylanchaisumdet49265 жыл бұрын
How would you adjust the tips if they are uneven?
@backyardchevy3285 жыл бұрын
The 4 rubber hangers in the back, if u take the weight off hangers they have enough play to adjust em to the left or right
@felixa17172 жыл бұрын
Can you list all the tools that you need for this?
@backyardchevy3282 жыл бұрын
WD-40...A 3/8ths ratchet...(all sockets for 3/8ths drive)..14mm socket...17mm socket..12mm wrench...14mm wrench...exhaust hanger removal pliers or just a flat head screwdriver.
@felixa17172 жыл бұрын
@@backyardchevy328 thank you, also how much torque foot pounds did u use to tighten them?
@backyardchevy3282 жыл бұрын
@@felixa1717 well it didnt include any torque specs but i believe the front bolts were 25 ft lbs that connect to the cat back...the rest id probably do 25-35 ft lbs torque
@jcphelan39085 жыл бұрын
How did you keep the car from rolling forward?
@backyardchevy3285 жыл бұрын
I use wheel chocks in front of the wheel but u can also use pieces of 2x4 wood in front of tires
@ghostnphil2 жыл бұрын
How much hp do you think you gained?
@backyardchevy3282 жыл бұрын
Well normally u wont gain much since the most restrictive part of exhaust is the cstalytic converter..so id say probably 5-8hp...but it does open it up at higher rpms