Titanium Tomei Exhaust For The FRS - Sound Clips

[@The_True_]

Sounding much better, that particular FRS deserved to go full Tomei! Targa Newfoundland alone earned that, to be honest. Great job fellas!

[@kimriley2491]

BIG REVS ~ small penis

[@ambushdrift]

I had one on my FRS. It cracked at the resonator. I know it’s happened to multiple people, hopefully you don’t suffer the same fate!

[@kimriley2491]

BIG REVS ~ small penis

[@jchi778]

With how thin the exhaust is and the relatively low-price for a full titanium exhaust, it's not too surprising.

[@largehat5436]

ivebeen For full titanium, this is FAR from expensive. This is what I'd consider a cheap catback to be honest.

[@Nanogrip]

Oh man, sorry to hear that. Maybe additional brace or mounts would have prevented the crack? Hopefully Tomei can quickly address the problem.

[@ambushdrift]

I reached out to Tomei but because I’m over the 1 year warranty, I’d have to pay full price for a midpipe replacement ($500ish). It’s a known issue though. Oh well

[@Wilkwayadventures]

Sounds even better with a turbo 😋 I love my 80r, the clearance is terrible but the sound makes up for it.

[@rookietoprobuildz]

Glad to know, because I'm boosted.

[@VEDEMRACING99]

The S2K might be finished, But the FRS is Build is still going!🙌

[@OliverRivettCarnac]

Got the Tomei Ti Extreme exhaust on my Evo X and it is flippen awesome! Love it , the quality of the product and the relatively reasonably price is just epic. Great choice. I mean it's loud but I love it.

[@PGHdrift]

That looks to be an amazing fitting exhaust.

[@PGHdrift]

I run a hood exit on my ka-t s13 drift car but going to a regular exhaust have been wondering about what to get.

[@Renesis97]

THAT’S how a Subaru engine should sound. Much better than before

[@Dabber422]

Beautiful exhaust, And the welds are unbelivible, Nice work Tomei A+

[@reviewcrewforyou]

I think the smallest pea shooter sounded better than the medium one. Thanks for another great vid guys!

[@Phrew]

That thing almost flew off when they started the car, though :D

[@JJ_ExMachina]

I think the issue with the mid sized silencer was that fact that it was not fully secured, and every time they rev the engine you can see the silencer popping out. SO this creates that exhaust "leak" whoosh sound, that no one likes to hear.

[@pasicunanan5992]

It was also vibrating making that rattling noise. It’ll probably sound differently if properly secured.

[@eevox680]

I have this cat back on my car, absolutely love it, one of my favorite parts I bought

[@Br_chin]

YO IS DAT A TOMEI DAAAHHHHHHHHHHHHH

[@Mrtrunks]

Nothing like waking up to a new video!

[@evilspoons]

Holy cow, there's a Subaru shop near me that sells Cobb and Tomei - I went there to buy an Accessport for my GR STi, and I was hoping they also carried the Cobb exhaust (no dice). I told the guy in the shop that I wanted something "really quiet, but with a bit more rumble" and he recommended the Tomei straight pipe titanium thing, which is, bar none, the loudest exhaust I have ever heard on a car - he demonstrated it to me on his FR-S. I suspect he may have hearing damage if he thinks that's a quiet exhaust.

[@JJ_ExMachina]

Erik Tomlinson ... Invidia Q300 has always been a nice sounding but not too loud option for vehicles. Great rumble, and only a bit louder then stock at Wide open throttle. OH and no drone.

[@jeffg377]

With all three silencers installed the exhaust pushes the silencer out so You need all three screws.

[@troycheron]

I heard this set up at their lapping day. Amazing sound

[@kimriley2491]

BIG REVS ~ small penis

[@bronbrower2744]

@@kimriley2491 ~ micro penis

[@kimriley2491]

micro penis = very small penis.

[@jasonthomas2606]

Tomo from Tomei says “Hi” Peter, he still remembers you.

[@louisuhhh_4546]

You cant hide the sound of it with or without the silencer HAHAHAHA I luv it man

[@roboticvenom1935]

Oh my God! That sounds so fucking good and rumbly! The fact that the exhaust makes it sound like a uel headers I crazy!

[@roboticvenom1935]

@sneeky7 well you're in the minority, most people think it sounds good and the header adds power, and since when did it haven't power? It only weighs 2700 pounds and drives amazing, and still does 0 to 60 in the low 6's? That's quick stupid

[@kimriley2491]

BIG REVS ~ small penis ….

[@lien.b8]

Kim Riley *3” exhaust ~ big gains*

[@kimriley2491]

BIG GAINS ~ small penis -> 3".

[@bronbrower2744]

@@kimriley2491 ~ micro penis

[@dennisbarrett7642]

10 lb exhaust and 20 lbs of wrap haha. Nice job guys!

[@sirawesomemcdouglas5720]

Really? I hope your joking.

[@ForzaWiz11]

Sir Awesome Mcdouglas The wrap for header prob 10lbs alone I just got it lol

[@twinscrew928]

How timely! I was at the track (Waterford Hills in Michigan) this past Friday. Got blacked flagged for noise. They said I was WAY over. So I'm looking at possibly adding a silencer. Despite having to short shift and basically coast down the back straight for the entire day, still set a new personal best 1:19.60. Crazy! Not sure I like the idea of a silencer on a 5.0l V8 Porsche 928 motor, but maybe worth a try. Thanks for the sound clips. Now go rip some laps!

[@elardmm]

Last time I was there an s2k got kicked out, and a new camaro was given a warning and if he wanted to keep driving he had to shift to a higher gear on the back straight. I am going there this sunday.

[@-tr0n]

i guess at least you guys have a racetrack, even if it's ruled by the PTA.

[@rahvens]

Guys you went nuts ... i love it ! ... greetings from Dominican Republic ... haven't finished the video yet cause i had to post a comment right away :D I ... i like the new exhaust system, good find !

[@oscslife5047]

Love the new sound!!!!

[@joed9569]

That is quite the upgrade!

[@cdsprech]

It sounded like you guys were considering running one of the silencers for an event, but in the instructions I received for the Tomei Expreme on my STi, it specifically states not to use a silencer for performance driving. Not sure if that'll affect N/A cars the same way, but my understanding is it's too restrictive to be safe for extended high-rpm use. Great install video as always, the car looks and sounds amazing!

[@speedacademy]

No, we'd never use a silencer for any WOT driving. Thats just asking for trouble.

[@GustavCarl17]

Can't wait to hear this thing on track

[@Wheemer]

You just can't do a sound test without the silencer attached with all three bolts. There was a tinny sound from the metal tapping together in the first test. Then with the smaller silencer installed the exhaust just pushes the whole thing out and bypasses it.

[@kimriley2491]

BIG REVS ~ small penis.

[@bronbrower2744]

@@kimriley2491 ~ micro penis

[@kimriley2491]

micro penis = very small penis

[@Riley1524]

You're supposed to soak that exhaust wrap in water so it tightens around it when it dries.

[@KindOfyeah]

ik this 2 years late but not titanium wrap lol

[@350Z247]

This sounds a million times better but that muffler is not worth losing the diffiser. While you don't have a full flat floor, that diffuser was still helping a lot more than the muffler is worth. Especially with those diffusers added to the splitter the aero balance could be super off.

[@hahaha12345678993]

that heat wrap stuff is so much easier to wrap when its wet, also you get a tighter wrap

[@anthonymoy4471]

Great job on video guys

[@jakeeclouse4799]

Unequal length all day baby! Sounds way better. That equal length sounded good but it sounds like a honda to me.

[@simoncarter5951]

That sounds so much better it’s crazy. Silencers sound crap throw. Leave them out. That much back pressure can’t be good for power.

[@kreparAZ]

Awesome video. So much better

[@josephbarnes3099]

The car looks amazing like a mini Austin Martin Gt

[@austin2Kool]

I was really wanting this on my frs but ultimately went with hks. My cars a street car it doesn’t have to be the lightest also stainless last longer :)

[@sarahdell4042]

Sounds much better

[@RobertKohut]

Wow, top quality, fitment and price!! Nice!!

[@boblast5582]

lets be honest.. its still raspy af in any silencer or no silencer config... I mean better than the old exhaust, but rasp is definitely not "completely gone"

[@vmoutsop]

IMO, if you're going to drive around town the Pea-shooter silencer sounds better than just the 1st level silencer

[@speedacademy]

We thought so too!

[@louisuhhh_4546]

Where did u get that LOUD , FAST, AND REAL sticker? I rlly like it

[@reallunacy]

It doesn't sound shabby at all. I'm planning on going with Dezod for my non track car.

[@Sio91pmw]

Ive got the same set up but with EL headers instead it can scream for sure

[@anthonymoy4471]

I actually like pea shooter sound with the light backfire

[@Mike_Pedals]

Would've been nice if it was v band junctions rather than the traditional flanges, but still nice nonetheless.

[@werksguy]

Maybe get a dynotune done before you take to the track with the silencer out. It may sound a bit different after the tune. An tune it on sunoco 94 or shell 91.

[@X1xRiGox3X]

Hopefully they make a tomei single exit for the new supra

[@MrReefurcheefur]

This frs needs a K series

[@aaronbryan5095]

Now let's go rip some hot laps!

[@habbibi.86]

Is that a Tomei DAAAWWWG?

[@jamescashman122]

You guys should look into another Canadian company, Lachute Performance builts high end parts for Subaru's

[@RobertKohut]

Great sound too!! Nice!! (no silencer!)

[@VS666]

YO IS THA A TOMEI DAWWGGG

[@Mario-hd5se]

Question will you neeed the donut gasket ?

[@itskevinl]

Nice. I found wrapping the headers on my old Subaru helped reduce the tinny ticking noise from thinwalled metal. Are you guys going spray coat the wrap to protect it?

[@Leofred2000]

12:10 Omg you turned it into a wrx

[@germanosorto8815]

Wanted to buy the part, clicked on the Tomei page but, I couldn't see the buy option

[@lien.b8]

Personally run a single exit by NV, honestly for the track I prefer the silencer in there or she screams. Once I drove it for a bit the “tin-ie” sound went away some

[@hackerboy012]

IS THAT A TOMEEII DAAAHHHHHHHHHHH

[@davidbroadbent1878]

Cheaper to order up two of these exhausts to chop up and piece together for a custom application or go for the vibrant pieces for a custom setup?

[@kennyman338]

With the silencers it like what dp said it like a stock exhaust with a lot of backpressure that's really restrictive. I thought with frs/brz with unequal length header your valves go back.....

[@jaychiu7773]

JDL headers up for grabs?

[@Nozarashi86]

You guys would have been happier with my setup. Get the Nameless Performance front/over pipe with dual resonators and Magnaflow 200cel racing cat. You'll thank me later... I also have mixed feelings about you guys using that Tomei header... Ace header would have been a lot better.

[@speedacademy]

The differences in hp on headers that are fitted to a car which makes 200-300 hp are marginal. Maybe 3-5hp max and at that point it really doesnt make enough difference for us.

[@Nozarashi86]

@@speedacademy I'm game to compare Dyno sheets... I'll show you mine if you show me yours 😘

[@streetboyschematics]

Soo many shiny parts

[@markoz673bajen8]

Why not go with the newest Y pipe from theirs.

[@TheAussiefrog]

What are people’s thoughts on heat wrap vs ceramic coating?

[@izaiahhorrocks6939]

is that a TOMEI DAWG?!

[@woofer2121]

I thought the "Subaru sound" was the sound of less power. Dont those engine make more power with equal length?

[@kiwiasian]

Simple answer is the UEL makes more torque lower in the rev range, EL will make greater peak power. So good options with both depending on driving priorities.

[@JJ_ExMachina]

Equal length makes more top end power... Unequal makes better mid range... With the way this engine behaves I would rather have the bump in mid range and try and cure that 4k dip in the power band.

[@NathanaelNaused]

They do but people will justify anything for sound.

[@pacman1338]

would the headers need a tune?

[@BigCarKilla]

Was there a an improvement to the torque dip?

[@massimovignali1195]

dB reading by chance? I'm from Melbourne and they don't like loud things lol

[@kiwiasian]

Guys, thoughts on ceramic coating instead of wrapping?

[@WelcomeToTheMadness]

It looks good.

[@freestylmohammad]

What diffuser is that 😨😨

[@billymillssuarez5883]

Aren’t you supposed to Soak the wrap with water so it won’t unwrap when it gets heated.

[@tnyce616]

Correct me if I’m wrong, but won’t unequal length headers cause ringland?

[@KevinBurkeRacing]

bummed you sold the S2000, but your keeping the FRS =(

[@JJ_ExMachina]

I use to own an S2k... I now own a FRS... and I much prefer the newer car that has great aftermarket support on the cheaper side of things. The S2k's aftermarket support is getting a bit pricey for my own personal taste. PLUS I used the S2k for track days and aggressive driving... I feel like beating the FRS to hell and not giving a damn is better then beating the S2k to death. The current owner uses it as a weekend car, and is a bit older, so I know the car will be well cared for.

[@ricojuarez2630]

Where do you buy the cover for the other side of the bumper

[@demented392rt5]

i have a hks front pipe and a tomei catback. i hate this. way too loud i bought the this way and immediately going to change this exhaust 😭😭

[@reivansantiago7054]

K240 vids pls!

[@Xyrkul]

10:36 screw*

[@marottajoe]

I did not realize Marisa made auto parts.

[@MJPunit]

That's fucking naughtyyyyyyy with that first exhaust... wtf dude.... sounds sexy though... bet the fuzz love you rippin the streets. I'm after getting a gt86 soon, looking at mods and upgrades to tune it for a drift set up but also a daily... I can hear my wallet screaming like that exhaust note 🤣🤣

[@saulespino2510]

Isn't ceramic coating better?

[@jonathanmarquez7631]

this video gave me a tickle

[@michaelhillard2594]

Yo dawg. What's good with that DWL diffuser??

[@catxx5480]

How much weight does the wrapping add ??

[@FormedAndFunctioned]

when are the hats going to be restocked? :s

[@speedacademy]

Check on Friday, we hope to have all the stock updated with new hats and shirts.

[@FormedAndFunctioned]

Speed Academy just ordered a new hat that’s been sold out since forever! Thank you!!

[@Nozarashi86]

By the way... Cut your rear bumper. You're going to completely screw the aero of your car leaving it on, due to the giant gap the OEM muffler left. It's going to create an air pocket, and will lift the rear of the car. I know you guys have seen my car and know what I'm talking about...

[@f86tune48]

What if you get a cover?

[@alexhernandez9064]

Link for the exhaust cover ?

[@vaioskaliakoudas6388]

How is the song at 6:53 called???

[@robertomontoya352]

Is that a tomei dahhh?!

[@vladkuz1298]

u did tune or just slap that on ?

[@jktubefreek1]

is this set pass the racr track regulation??? how much dB ?? at 4000rmp

[@MrLoadingarea]

Good song what was it?

[@nwalker8422]

Why not ceramic coat the manifold?

[@daska123man]

How much for the diffuser if you guys dont want it?

[@JibaroCZ4A]

I wonder if it will sound as good on an Evo X? Will my neighbors hate me?

[@speedacademy]

It sounds badass, def not as loud. I had one on my Evo X and loved it.

[@Falken240]

What tune do you guys use?

[@neodiaaz5003]

What titanium test pipe use it ?

[@kenengrie]

We do it the other way around in Beligum: Loud on the street, because cops don't care as much, 95db limits on racetrack...