PINCHING THE FRAME RAILS TO FIT 1935 FORD SEDAN BODY

[@robertdehaes9329]

Just listening to Chads thought process is an educational boost. He weighs options, selects the best one and goes till something does or doesn't change it.

[@gettingoldsuckss]

Lmao.. educational huh. It's humorous to me. Lot of dumb ideas and going about things the wrong way is what I see and hear

[@philstone6564]

Good job both of you.👍 Just one comment, I would like to see at least one of these projects finished.

[@stephenmelton7706]

I have no interest in building, or working on cars, but I love Chad's creativity and work ethic. That's why I watch.

[@i8ntnuts]

Absolutely. He put his heart and soul into it

[@williamgroel2880]

It’s fun watching you figure out what to do.There’s always a way to do the job. Thank you for sharing your knowledge.

[@oldscoolcooldiecast1879]

I like how he just does him and actually finishes his cars can’t wait to see the finished product

[@lapsteeler85]

The creativity in the projects keeps me coming back for more, out of the ordinary builds are refreshing ! Cheers from Ontario!

[@ole57hotrod]

At 64 i learn something every time i watch the 2 of you working together. thank you both for sharing...

[@raymondthornton7611]

It is amazing to work outside all summer. You are an inspiration when it comes to not being afraid to make things happen.

[@garygallagher7557]

Chad, you still need to cut the short channel between the passenger rail and the passenger x rail. The passenger rail will not move until it is free. Look at the small triangle the three elements make up. In geometry a triangle is the strongest structure.

[@MrGunPilot]

I'm thinking the same thing. Did he perhaps cut it off camera? Nope, I see he didn't.

[@i8ntnuts]

That was one hell of a nice frame huh

[@robertshaffner707]

Yes that little piece right above the end of the muffler needs to be cut! Then it would be completely free to put whatever he wants with no clamps!

[@austinmarcsisak8708]

Would of made it so much easier

[@saltycreole2673]

Not that I know anything but one side has that short beam and the other one doesn't. The one that moves doesn't. Right?

[@kenbaggett1787]

Love to watch you work, you have more energy at 50 than I had at 10!

[@peterarndt3068]

Thanks again for your hard work and for taking the time to share with us. God bless

[@clifc6351]

Love the build. Thank You for sharing the day with us. Thank You for expressing YOUR Artistic FREEDOM. Thank You Jolene for your excellent production work. Beautiful place to work your craft.

[@frankrodriguez1977]

Absolutely ingenious. Love to see Chad fix the issues where most people would throw up their hands and give up.

[@britman101]

I am with you Stephen. I enjoy working on cars but have not desire to do a built. That being said I flat love Chad's creativity and his ability to think way outside the box. I have learned a lot and am still learning. He and Jolene are a great team and are a great asset to the auto community. Best workshop videos I have seen anywhere. Way to go. Keep it up.

[@marcbaker2502]

Always great to see what Chad works on and which job he tackles each day when a new video is uploaded. ... Watching from Melbourne, Australia

[@jimcoplan9502]

More amazing modifications to the Hupmobile chassis. Chad is getting this done fast and Jolene is doing her share of the welding and terrific video work. Keep on keeping on!

[@billhoward7730]

It is really amazing to watch Chad and Jolene work together. Together they figure out what to do and do it with success working on the fly. GREAT JOB!!!!!!!!. Bill

[@kevinbrown1549]

Chad & Jolene you both are an inspiration to the custom rodding industry...thank you for your teachings and entertainment.

[@jordanbest3926]

I love the no nonsense approach you use in everything you do. What you do in one hour takes others days to accomplish

[@alanpaulick7815]

Nothing better than watching Bad Chad going on a mission. Thanks to Jolene for sharing this video 🙌

[@kevinbrown1549]

I can't believe how clean and rust free that hup frame is...wow.

[@joelaurieri9065]

Really like the thought process for pinching the frame. Looking fwd to seeing the body on the frame.

[@joebourque4860]

You work fast chad. You can see it before it's finished. Thanks you for all the information. Thanks for the video Jolene 👍👍👍

[@jeffreycrossin427]

You have a great group of friends. It's the quality of your friends but the quantity that matters.

[@hitnmiss49]

Thank you Chad and Jolene for these educational videos.

[@Roopull]

Good stuff! Inspiring! I wish I had a "Jolene" to record my progress on my projects. To film as I work is exhausting & breaks my rhythm. You're lucky, Chad!

[@brew1456]

Thank you for your videos ,they are helping me more than you know......You 2 are awsome

[@DS-Turbo]

This channel is so awesome. We get to see every step of building a custom hot rod. Great work on what you do. This is better than any TV show out there

[@dwellyryder3553]

I did the same kind of work for 50 years plus The Secret Never be afraid to try something You are a character in the most respectful sense

[@matthewfocke5360]

Jolene's smile launches a thousand smiles. Your Helen of Troy. Chad, you are a card taunting your viewers with descriptions of your special lady. We admire your pictorial descriptions. I say this in all that is wholesome and respectful. We, men, do admire women for their beauty whether it be in mind, body, or soul. Your truck is the lady that sings last. Oh yea. What a gal!

[@Jmartestuesday]

Man-oh-man -- This is a perfect example of that old "saying" Doers dont plan and Planners dont do !! I was actually squriming in my seat while watching the squeezing and cutting. I "knew" the "triangled frame rails MUST be cut somewhere, but also realized Chad would *Get it done*. Still I was concerned about blade getting bound while cutting with the frame trying to compress. Chad is my "hero". he gets things DONE, and done well.

[@roymazac2532]

Getting it ready for the body. Then we can see it come together. Always thanks for the video.

[@jimberry1227]

Jolene thanks for letting us hang out with Chad & seeing him for real.

[@timmaccowan]

very kool. Nice seeing different things. Makes me think of what I need to do to my 1929 truck. thanks keep the videos coming.

[@qwertyhenry1]

Wow what a creative mind ,the way you see things and get them done ✔ 👏

[@leosimon9463]

Great job getting the frame narrowed. Thanks for sharing your time with us.😁

[@fillie37d.71]

Must be nice to be working outdoors with a beautiful back drop like that. Looks stunning. 🇨🇦

[@johnstewart9396]

Stuff that front end under there! Best entertainment on KZbin Keep up the good work!

[@jamesclark1131]

Great work Chad, car coming along nicely, love watching the process

[@oxyfee6486]

Could you imagine being chads baby sitter when he was younger,she’s probably still in therapy,lol🤣 love the show guys.

[@virtuestreams2616]

So many projects and just one Chad-amazing!

[@mconfluence]

Another great build video! You to are Rockstar's!

[@baldanddangerous1572]

loving the fab work its looking great

[@aabartu3]

Happiness and positivity are definitely contagious!

[@fredhoman6101]

Great video again,it's coming together for shure,great work of both of you,thanks for sharing

[@cannabisticannabisticino2718]

Run faster than your shoes, 😁 too much fun. Great job guys, you are the best. 👍 Greetings from Switzerland

[@Duckduckgoose805]

Chad breaks things down so well. Very easy to understand.

[@donaldscheer5206]

Way Past My Years Of Tinkering On Cars! BUT, Watch Every Video! Enjoy Your Humbleness, Creativity! And The Artist That You Are! Great Camera Work Jolene! Awesome How You Pan & Walk In/Out! ..I write this Knowing That You Somehow Hurt Your Back DEC. 2021... Get Well Dudette! Holding That Camera And Getting In Those Awkward (BEST CAMERA SHOOT) Positions Can Be Brutal On One's Back.

[@johnnygarrett6055]

Ready to see the frame done and the car sitting on it going to be cool

[@allanimalstaxi]

I never know where you are when working on a your project, I just it's always going to work out. Great video and great job Jolene, as usual.

[@bennys.8814]

Another great video thanks guys for your time

[@cathyandgreg4239]

Really enjoyed seeing how you pinched the frame, there is always a solution!

[@jamesgoucher862]

Interesting listening to Chad talk his way through the project. I only do what my Brain tells me too. God bless.

[@michaelbristol6467]

Good deal, Bad Chad & Jolene @ Hiltz Auto where dreams come true. 😉👍

[@raywall5712]

I like the caps you made for the front end. I think it will look great.

[@joeyb.9858]

Happy day Hiltz motor company.. racecar is looking better day by day keep up the great work..

[@Manof777]

Nice work! You and Jolene are innovative and enjoyable to watch at work.

[@calvinwaits7835]

Really love your work and ideas… keep it up

[@ronlynch7744]

Cuts & bends it his way with Jolene capturing it all people. 😎👍🇨🇦

[@franka2507]

Like it when a plan comes together,

[@jimmcculloch2336]

Really enjoying this hole build truck and car combo great stuff from M👀nta Bay south Australia

[@aldriccomeau]

Awesome job you have great advice Brings me back to the good old days

[@goranabrahamsson3468]

Chassi is coming along nicely

[@dennisbarnett1995]

Hi Jolene and Chad. Here to watch another great fabrication show on the race car build. Thank you, Dennis here from Filer Idaho USA

[@kevinhall3443]

Really liking where the race car is headed. The flathead makes me smile!

[@Hugister]

Very interesting modification of the frame. Good job!

[@MIKEH.777]

I like how you pinched the rear of the frame. That race car is going to be fantastic and it has a beautiful chopped roof to. I would love to have a car exactly like this one I would drive it every day. The interior would be all modern and up to date. Keep up the great work and God Bless you guys and Fina . I just love you guys. 🔥💯💪🏼👍👍🙏🙏✌😊✌

[@Mr51Fargo]

Its comin along nicely Chad can't wait to see the body on it . Keep up the great work...

[@antoniocovarrubias7831]

You got a bracket makin pressure on the passenger side that’s why you are not moving the chassi in to the 45” width that you need.

[@jimwhittemore1610]

Howdy, never know what to expect from one day to the next. I like it like that, thanks

[@DroTrebor]

The confidence you have in cutting the frame…inspiring!

[@timdobbs9069]

excited to see the chassis driving around I know Chad will do it.

[@mrfatbobrider1969]

Shout out to Chad n Jolene from New Zealand..love the channel guys real builds in real time shows exactly how long builds take ..better than time lapse videos..just " MASSIVE ".

[@moyadapne968]

No flying down to Wanaka for you! Cheers. ChCh. Love Chad's channel too.

[@mrfatbobrider1969]

@@moyadapne968 yeah pretty straight up kind of fella.

[@callmenortnortin467]

Enjoying watching you create things . Ratcheting load binders are your friend ;) just saying :)

[@larrybailey43]

That brace by muffler not allowing frame to bend on the right side !

[@ralphtetlow8745]

That’s right, the sister to it on the dvr side by trans. The rails can’t move squarely. Should cut both lose before pinching the rails.

[@SA-FormerlyCreamy]

Greetings from Saskatchewan!! Love the content Chad & Jolene!! Keep on keeping on!! 👍🙏

[@benjiehoffard9323]

I love listening to your thought process

[@jimwilson465]

Keep on working on the race car. It is going to look great when it is done. Especially being pulled by the truck. Keep up the great work!

[@stephenrouse2233]

Another great episode Chad. I’m really enjoying this part of the build.👍

[@frankesparza9516]

I believe it does someone else's smile can make someone's a great day

[@jasonwebster7257]

Turning out to be a really cool project can't wait to see the finished product

[@mikeboutang4539]

You do some pretty amazing work with metal fabrication and body work. The race car is cool. Your thought process in building your projects is second to none. Great content.

[@jarobuilds]

I would be there for days measuring and planning and measuring some more and pondering. Chad just sees it in his head and goes for it. No time wasted!

[@cavinkachel498]

Chad does such a great job not to mention Jolene! Keep up the good work!

[@shawns57garage]

Nice work filling in them welds with the coat hanger & mig. Before mig weld days I welded up my Chevelle floors with oxy acetylene and coat hangers .. in the 80’s Car is still solid there today

[@raybedell6031]

McDonald love watching you work doing a great job keeping me motivated

[@allanlazarus2694]

If you cut the cross member above the exhaust box it would move freely without vandalising the frame

[@bigc4263]

Yes he is Good at what he does & to share that not no 1 person is perfect he has a KZbin channel not me !!

[@elvisshotrods6094]

Home from work after working on cars all day to watch you do it 👍

[@norust1966]

Love it when Jim shares his ideas.

[@Op1zilla]

Even back in the day they put holes in the car to make it lighter, I like it, ggz

[@terrygrant4014]

Good work Chad plain and simple And all in an hour 👍

[@nigelpearson7617]

Race car looking fantastic keep up the good work Chad & Jolene

[@kwikslvr73]

Your show just keeps getting better and better....keep it up brother! and try those capless sharpies!

[@christinebornstein8239]

Hi Jolene & Chad: Great job on pulling the frame together for your hot rod! Yipee! Your on your way!! Umatilla, Florida

[@Dave-rowe]

Great channel, enjoy the daily videos you both put some much effort into the projects

[@jonandrew52]

Hi Chad, I've been waiting for a chance to tell you how talented I think you are. I'm building a 1/25 scale copy of the truck. That's all I can afford. I have an 84 VW Jetta that a tree fell on damaging the roof. I'm going to use PDR to repair it. I got a number of special tools to do it. Keep on keepin' on with all the cool stuff. Warm Regards, Jon

[@southernacho]

You can see on the go, what's going on inside Chad's brain. Highly confident and I can do aptitude. Love it!!!! 😎👌

[@crittercraig9445]

Once again you two are having fun with this build. Great job give Fina a couple of treats. Take Care

[@stevenmackenzie8527]

I like Chad's thought process, thanks for showing me your way.🙂