Bambu Labs P1P bed leveling before a print.

#shorts Bambu P1P shaking its bed during print bed leveling. Noise is from a Creality filament dryer.

[@user9675]

Auto need leveling comes standard on the p1p model?

[@Johns3DPrintingCorner]

Both use a single Z stepper with a long belt connecting each screw. I have not had to set the nozzle height on either machine. I need to read the documents on bed leveling because something weird is going on. Single belt, so the machine can't move the bed like a Railcore can. It can adjust extrusion amounts. So I definitely need to set the machine bed off level to see what it does, if I get an error code with directions or if it acts like a Railcore and fixes itself.

[@yumcherubicplum_5535]

Yes

[@eminstinct4114]

@@Johns3DPrintingCorner a good alternative to adjust the z offset is the first layer height setting and first laye extrusion width in Bambus slicer if your not using their slicer this will also work on orca slicer prusa slicer super slicer and prus slicer hope this helps