Basic nitro tuning and understanding the nitro engine ⛽️⛽️⛽️⛽️🔥🔥🔥🔥🔥

[@5thScale]

Good information because I have been out of nitro for 15 years so I'm headed back in fresh and open to different opinions because most information is good information!

[@Matthewstoychest]

Foundry RC Thanks Gary I truly love this rtr 8ight. I real appreciate the kind words.

[@RcInDaHiz]

Great info. I am restoring a RC10GT and even as you spoke, it came flowing back to me... Thanks bro.!

[@traxxasrc10]

Personally I’ve never had a separate break in fuel. I use whatever I want to use to run it later when break in is done.

[@mikeEshroom]

How much is a difference is it driving your Savage vs the losi 8ight T?

[@cordelldotson4327]

I havd the same losi and having trouble breaking it in

[@zachh3293]

What fuel did you use in you losi 8ight t with the dynamite .28 ?? I just got mine

[@Matthewstoychest]

Zach H traxxas top fuel for break in and Byron 30/11 for running

[@zachh3293]

Matthews Toy Chest thanks! I have heard multiple times that byrons in going out of business but a main hobbies still has alott

[@Matthewstoychest]

Zach H they did go out of Business amain only has what they have in stock. I bought a lot of fuel from amain before it’s all gone.

[@zachh3293]

Matthews Toy Chest is top fuel only one mixture and why do you use traxxas everyone that I’ve heard talk about it calls it garbage I am amsuming it’s cause the really low nitro percentage and really high oil percentage

[@Matthewstoychest]

Zach H it only comes in one mixture. I use it cause it has a very high oil percent. I helps keeps the temperature up. It’s great as break in fuel but it sucks for everything else

[@nitroneal48]

I like the Botajell way

[@leomerino3906]

So if the engine don’t turn off in 3 seconds which way am I turning the low speed?

[@Matthewstoychest]

Generally, you wanted to be 3 to 5 seconds. If it’s turning off in less than three seconds, and it just instantly dies out, you need to richen the mixture up. If it goes on for like 6 to 8 seconds, you need to lean it out. What you’re looking for is the engine to run for roughly 3 to 5 seconds, and then very slightly raise up an rpm, and then die out.

[@rcpatapouf]

Interesting

[@ArticSun]

Are you using Taxxas 20% or 33% for the break in process?

[@Matthewstoychest]

I use traxxas 20% fuel for break in then go to byrons 30/11 after break in.

[@bradleypendleton202]

Nice dude great video

[@Matthewstoychest]

Brad's Rcs thank you much appreciated

[@hizzleman4111]

What percentage of Traxxas top fuel do you use for break in?

[@Matthewstoychest]

Hizzle Man41 20%.

[@camaroboi13]

What break in process do you recommend? I've seen so many different methods out there, just picked up this same RTR truggy for my birthday and haven't put fuel in it yet. My last truck (nitro stampede, atleast 10 years old) is still running the stock Pro .15 motor on 20% traxxas fuel. Believe it or not, I took that pede out of the box, added fuel, and ripped it from day one. No break in on that one. She's still running strong a decade later lol. I wanna be a bit more careful on the Losi this time around!

[@Matthewstoychest]

camaroboi13 everyone has there own break in method. The main thing is that you want to make sure that you are doing heat cycles. The first tank I run it at idle (with wheels off the ground) letting the engine get to 200-220 degrees. After that Tank I turn the truck off and let it cool for 30-45 minutes. Next tank is truck on ground and running it from idle to 1/4 throttle then again after that tank letting it cool for 30-45 minuets. You will want to repeat these steps so the third tank will be up to 1/2 throttle then cool then 4th tank up to 3/4 then cool then the 5th tank up to full throttle then cool. After that I generally go easy on truck for 7 more tanks then on the 13th tank thats when I start the tuning process and go crazy on the truck. Hope this helps have a blast with the truck.

[@2_be_determined]

👍

[@rcnitroguy9317]

You are ruining the box shame on you

[@pitbikecookracing3324]

👍